Skip to content
Publicly Available Published by De Gruyter February 13, 2014

Erratum to Two-Dimensional Modeling of an Externally Irradiated Slurry Photoreactor

  • Giovanni Palmisano EMAIL logo , Vittorio Loddo and Vincenzo Augugliaro

Erratum in: International Journal of Chemical Reactor Engineering 2013;11(2):675–85. After online publication of 10.1515/ijcre-2012-0049 we realized that some of the data were in error. Please find the revised data below.

Eq. (18) in page 678 should read as follows:

(18)k1"=kIα

Eq. (19) in page 678 should read as follows:

(19)KSub=kadskdes+kIα

Eq. (26) in page 680 should read as follows:

(26)kobs=1SAV0(r2r1)θ0θ0k'Iαkadskdes+kIα11+kadsCSub,0kdes+kIα(r1+l)dldθ

In page 680, the paragraph before eq. (27) and eq. (27) should read as follows:

The local radiation intensity, I, is given by eqs (9) and (20) and stands when only one lamp is on:

(27)I=I0,r1=r0r0r11R2exp(2bsCcatl)

where I0,r1=r0 is the radiation intensity reaching the photoreactor wall at θ = 0, i.e. r1 = r0, when only one lamp is on.

Figure 4 (page 680) and Figure 5 (page 681) report the light radiation flux inside the reactor divided by that reaching the photoreactor wall at θ = 0 due to only one lamp (I/I0,r1=r0).

Notations (page 683) corresponding to k', kads, kdes and kobs should read as follows:

k' [mmol m−2(1−α) W−α h−1]

kads [m h−1]

kdes [mmol m−2 h−1]

kobs [h−1]

Published Online: 2014-2-13
Published in Print: 2014-1-1

©2014 by De Gruyter

Downloaded on 19.3.2024 from https://www.degruyter.com/document/doi/10.1515/ijcre-2014-0010/html
Scroll to top button