Jump to ContentJump to Main Navigation

New Journal at De Gruyter!

Chemical Product and Process Modeling

Ed. by Sotudeh-Gharebagh, Rhamat / Mostoufi, Navid / Chaouki, Jamal

2 Issues per year

SCImago Journal Rank (SJR) 2014: 0.168
Source Normalized Impact per Paper (SNIP) 2014: 0.111
Impact per Publication (IPP) 2014: 0.314

Volume 4, Issue 1 (Jan 2009)


Advanced Control for a Fire-Tube Shell Boiler System

Abu Bakar, Tarmidi / Hussain, Mohamed Azlan

Published Online: 04/01/2009

Modeling and Energetic Analysis of Soybean Meal Drying in the Indirect Rotary Dryer

Luz, Gianini R. / Paraíso, Paulo R. / Jorge, Luiz M. M. / Andrade, Cid M. G.

Published Online: 04/09/2009

Multivariable Fuzzy-Neural Model of Polymer Process

Chitanov, Vassiliy / Petrov, Michail

Published Online: 04/15/2009

Modelling of Chromium Hexavalent Reduction by Ferrous Ion in a Batch Stirred Tank

Aroua, Mohamed Kheireddine / Chew, Chun Ming / Hussain, Mohamed Azlan

Published Online: 04/28/2009

Process Simulation and Design of Reactive Distillation Column

Jithin Prakash, K. J. / Jana, Amiya K

Published Online: 04/28/2009

Modelling and Optimisation of an Industrial Ethylene Oxide Reactor

Aryana, Shahla / Ahmadi, Mitra / Gomes, Vincent G / Romagnoli, Jose A / Ngian, Kian

Published Online: 05/05/2009

Optimization of Chemical Cleaning for Removal of Biofouling Layer

Madaeni, Sayed S / Saedi, Sh. / Rahimpour, F / Zereshki, S

Published Online: 05/05/2009

Pyrolysis Process Of Waste Polyethyleneterephtalate

Andel, Lukas / Kusy, Jaroslav / Vales, Josef / Safarova, Marcela

Published Online: 05/07/2009

CFD Simulation of Solid Hold-Up in Gas-Solid Fluidized Bed at High Gas Velocities

Hosseini, Seyyed Hossein / Zivdar, Mortaza / Rahimi, Rahbar / Samimi, Abdolreza

Published Online: 05/11/2009

Non-Swirling Steady and Transient Flow Simulations in Short-Form Spray Dryers

Woo, Meng Wai / Daud, Wan Ramli Wan / Mujumdar, Arun Sadashiv / Wu, Zhonghua / Talib, Meor Zainal Meor / Tasirin, Siti Masrinda

Published Online: 05/13/2009

Kinetics and Process Selectivity Studies for the Preparation of 3, 7-Dinitro-1, 3, 5, 7-Tetraazabicyclo [3, 3, 1] Nonane

Jadhav, P. M. / Sarangapani, Radhakrishnan / Patil, R. S. / Kunjir, Ganesh M / Soman, T.

Published Online: 05/20/2009

Flexibility Analysis in Flowsheet Simulation of Solids Processes

Schwier, Daniel / Hartge, Ernst-Ulrich / Werther, Joachim / Gruhn, Guenter

Published Online: 06/02/2009

New Methods for Adaptation to Degeneration in Process Models for Process Industries

Karlsson, Christer P / Avelin, Anders / Dahlquist, Erik

Published Online: 06/03/2009

Hydro-Thermo-Mechanical Model for Highly Deformable Product during Convective Drying

Hassini, Lamine / Peczalski, Roman / Azzouz, Soufien / Belghith, Ali

Published Online: 06/22/2009

Modeling and Simulation studies for Aluminium - Fluoride Interactions in Nalgonda Defluoridation Process

George, Suja / Pandit, Prabhat / Gupta, Akhilendra Bhushan / Agarwal, Madhu

Published Online: 06/25/2009

Design of a PID Controller from a Predictive Control Algorithm

Panda, Rames Chandra / Subramaniam, Sobana

Published Online: 07/01/2009

CFD Modeling of Flow Pattern and Phase Holdup of Three Phase Fluidized Bed Contactor

Muthiah, Perumalsamy / Ponnusamy, Kalaichelvi / T.K., Radhakrishnan

Published Online: 08/13/2009

Chromium (VI) Adsorption on Activated Lignin

Tazerouti, Nassima / Amrani, Moussa

Published Online: 08/21/2009

Modeling Catalytic Combustion of Methane During the Warm-Up Period of the Converter

Chauhan, Sanchita / Kumar, Deepak / Srivastava, V. K.

Published Online: 10/23/2009

Effect of Intruded Exit on Riser Type Circulating Fluidized Beds

Daga, Sudarshan K. / Kumar, Vineet

Published Online: 11/20/2009

Short Communication

Methaemoglobin and Carboxyhaemoglobin Formation in Human Blood Due to NOx and CO Exposure: A Mathematical Model

Biyani, Ankit / Vyas, Raj K. / Singh, Kailash / Gupta, Akhilendra B. / Vyas, Sangeeta / Gupta, Sunil K.

Published Online: 04/15/2009


Letter to the Editor

Comments (0)

Please log in or register to comment.