New Journal at De Gruyter!
Ed. by de Lasa, Hugo / Xu, Charles
1 Issue per year
Increased IMPACT FACTOR 2011: 0.790
Volume 11 (2013)
Volume 10 (2012)
Volume 9 (2011)
Volume 8 (2010)
Volume 7 (2009)
Volume 6 (2008)
Volume 5 (2007)
Volume 4 (2006)
Volume 3 (2005)
Volume 2 (2004)
Volume 1 (2002)
Most Downloaded Articles
- Micro- and Macromechanics of Hopper Discharge of Ultrafine Cohesive Powder by Tomas, Jürgen and Kache, Guido
- Effect of Chitosan Addition on NiMo/Al2O3 Catalysts for Dibenzothiophene Hydrodesulfurization by Ríos-Caloch, Guillermina/ Santes, Víctor/ Escobar, José/ Valle-Orta, Maiby/ Barrera, María C. and Hernández-Barrera, Melissa
- Fischer Tropsch Synthesis: The Promoter Effects, Operating Conditions, and Reactor Synthesis by Sarkari, Majid/ Fazlollahi, Farhad and Atashi, Hossein
- A Trickle Fixed-Bed Recycle Reactor Model for the Fischer-Tropsch Synthesis by Brunner, Kyle M./ Duncan, Joshua C./ Harrison, Luke D./ Pratt, Kyle E./ Peguin, Robson P. S./ Bartholomew, Calvin H. and Hecker, William C.
- A Comprehensive Review of Just Suspended Speed in Liquid-Solid and Gas-Liquid-Solid Stirred Tank Reactors by Jafari, Rouzbeh/ Chaouki, Jamal and Tanguy, Philippe A.
Experimental Characteristics of Pneumatic Pulse Jet Pumping Systems with a Venturi-Like Reverse Flow Diverter
1Tsinghua University, firstname.lastname@example.org
2Tsinghua University, email@example.com
Citation Information: International Journal of Chemical Reactor Engineering. Volume 9, Issue 1, Pages –, ISSN (Online) 1542-6580, DOI: 10.1515/1542-6580.2581, May 2011
- Published Online:
The effects of area ratio of the diffuser entrance to the nozzle exit, displacement vessel volume, and suction gap configuration on the performance of pumping systems with a Venturi-like reverse flow diverter are investigated experimentally. The performance of a pumping system with area ratio of 1.5 is greater than one with area ratio of 1.0, but when the jet outlet velocity ranges from 1225 m/s, the performance of a suction gap in the shape of an axially-symmetric cylinder is the same as one with an arch-like configuration. The effective lifting factor should be more than 1.0, which means that the effective volume of the displacement vessel must be at least 1/(q-1) times the riser tube volume.