Abstract
Polyethylene terephthalate (PET) foils have been exposed to oxygen plasma and its afterglow in order to reveal compositional and structural modifications of the surface layer. Oxygen plasma was created by electrode-less RF discharge in a glass chamber so the O-atom density was close to 1022 m-3 although the density of charged particles was only about 1 × 1016 m-3. Long-living reactive particles created in plasma were leaked into the afterglow chamber using a two-stage rotary pump of pumping speed 4.4 × 10-3 m3 s-1. The density of O-atoms in the afterglow as measured with a catalytic probe was 3 × 1021 m-3, while the density of reactive oxygen molecules was estimated theoretically. The functionalization was accomplished even after a brief exposure to either plasma or afterglow since all samples were saturated with oxygen-rich functional groups as revealed by XPS. The water contact angle measurements, however, showed that only plasma treatment allowed for super-hydrophilicity, explained by rich surface morphology as detected by AFM. The differences in morphological properties between plasma and afterglow treated samples were explained by different interaction mechanisms between low and high energy particles impinging the polymer surface.
Graphical Abstract
References
[1] Cheng T.S., Lin H.T., Chuang M.J., Surface fluorination of polyethylene terephthalate films with RF plasma, Mater. Lett., 2004, 58, 650–653. 10.1016/S0167-577X(03)00586-XSearch in Google Scholar
[2] Vesel A., Hydrophobization of polymer polystyrene in flurine plasma, Mater. Tehnol., 2011, 45, 217-220. Search in Google Scholar
[3] Wang C., Lai P.-C., Syu S.H., Leu J., Effects of CF4 plasma treatment on the moisture uptake, diffusion, and WVTR of poly(ethylene terephthalate) flexible films, Surf. Coat. Tech. 2011, 206, 318-324. Search in Google Scholar
[4] Lehocky M., Mracek A., Improvement of dye adsorption on synthetic polyester fibers by low temperature plasma pre-treatment, Czech. J. Phys., 2006, 56, 1277-1282. 10.1007/s10582-006-0362-5Search in Google Scholar
[5] Vesel A., XPS study of surface modification of different polymer materials by oxygen plasma treatment, Inorm. Midem., 2008, 38, 257-265. Search in Google Scholar
[6] Vrlinic T., Vesel A., Cvelbar U., Krajnc M., Mozetic M., Rapid surface functionalization of poly(ethersulfone) foils using a highly reactive oxygen-plasma treatment, Surf. Inter. Anal., 2007, 39, 476-481. 10.1002/sia.2548Search in Google Scholar
[7] Singh, N.L. , Pelagade, S.M., Rane, R.S., Mukherjee, S., Deshpande, .P., Ganeshan, V., Shripathi, T., Influence of argon plasma treatment on polyethersulphone surface, Pramana – J. of Phys 2013, 80, 133-141. 10.1007/s12043-012-0461-8Search in Google Scholar
[8] Cvelbar U., Mozetic M., Junkar I., Vesel A., Kovac J., Drenik A., Vrlinic T., Hauptman N., Klanjsek-Gunde M., Markoli B., Krstulovic N., Milosevic S., Gaboriau F., Belmonte T., Oxygen plasma functionalization of poly(p-phenilene sulphide, Appl. Surf. Sci., 2007, 253, 8669-8673. 10.1016/j.apsusc.2007.04.074Search in Google Scholar
[9] Vesel A., Modification of polystyrene with highly reactive cold oxygen plasma, Surf. Coat. Technol. 2010, 205, 490-497. Search in Google Scholar
[10] Wang M.J., Chang Y.I., Poncin-Epaillard F., Effecets of the addition of hydrogen in the nitrogen cold plasma: The surface modification of polystyrene, Langmuir, 2003, 19, 8325-8330. 10.1021/la034023dSearch in Google Scholar
[11] Sowe M., Novak I., Vesel A., Junkar I., Lehocky M., Saha P., Chodak I., Analaysis and characterization of printed plasma-treated polyvinyl chloride, Int. J. Polym. Anal. Ch., 2009, 14, 641-651. 10.1080/10236660903225494Search in Google Scholar
[12] Asadinezhad A., Novak I., Lehocky M., Bilek F., Vesel A., Junkar I., P. Saha, A. Popelka,Cell proliferation of HaCaT keratinocytes on collagen films modified by argon plasma treatment, Molecules. 2010, 15, 2845-2856. Search in Google Scholar
[13] Asadinezhad A., Novak I., Lehocky M., Sedlarik V., Vesel A., Junkar I., Saha P., Chodak I., A physicochemical approach to render antibacterial surfaces on plasma-treated medical-grade PVC: Irgasan coating, Plasma Processes Poly. 2010, 7, 504-514. Search in Google Scholar
[14] Vesel A., Elersic K., Junkar I., Malic B., Modification of polyethylene terapthalat polymer using an oxygen plasma treatment, Mater. Tehnol., 2009, 43, 323-326. Search in Google Scholar
[15] Tomcik B., Popovic D. R., Jovanovic I. V, Petrovic Z. L. J., J., Modification of wettability of polymer surface by microwave plasmas, Polym. Res. 2001, 8, 259-266. Search in Google Scholar
[16] Vesel A., Mozetic M., Hladnik A., Dolenc J., Zule J., Milosevic S., Krstulovic N., Klanjsek-Gunde M., Hauptman N., Modification of ink-jet paper by oxygen plasma treatment, J. Phys. D: Appl. Phys., 2007, 40, 3689-3696. 10.1088/0022-3727/40/12/022Search in Google Scholar
[17] Gorjanc M., Bukosek V., Gorensek M., Vesel A., CF4 plasma and silver functionalized cotton, Tex. Res. J., 2010, 80, 2204-2231. 10.1177/0040517510376268Search in Google Scholar
[18] Puač N., Petrovic Z. Lj., Radetić M., Djordjevic A., Pressure RF Capacitively Coupled Plasma Reactor for Modification of Seeds, Polymers and Textile Fabrics, Mat. Sci. Forum., 2005, 494, 291-296. 10.4028/www.scientific.net/MSF.494.291Search in Google Scholar
[19] P. Jovancic P., Jocic D., Radetic M., Topalovic T., Petrovic Z. L., The Influence of Surface Modification on Related Functional Properties of Wool and Hemp, Curr. Res. Adv. Mater. Process., 2005, 494, 283-290. 10.4028/www.scientific.net/MSF.494.283Search in Google Scholar
[20] Donegan M., Milosavljevic V., Dowling D.P., Activation of PET using RF atmospheric plasma system, Plasma Chem Plasma P. 2013, 33, 941-957. Search in Google Scholar
[21] Hemola T., Matousek J., Hergelova B., Kormunda M., Wu L.Y.L, Activation of poly(ethylene terephthalate) surfaces by atmospheric pressure plasma, 2012, Cernak Poly. Degrad. Stabil., 97, 2249-2254. 10.1016/j.polymdegradstab.2012.08.001Search in Google Scholar
[22] Kontziampasis D., Constantoudis V., Gogolides E., Plasma directed organization of nanodots on polymers: Effects of polymer type and etching time on morphology and order Plasma. Process. Poly., 2012, 9, 866-872. 10.1002/ppap.201100163Search in Google Scholar
[23] Gotoh K., Kobayashi Y., Yasukawa A., Ishigami Y., Surface modification of PET films by atmospheric pressure plasma exposure with three reactive gas sources Colloid. Poly. Sci. 2012, 290, 1005-1014. Search in Google Scholar
[24] Wohlfart E., Fernandez-Blazquez J.P., Arzt E., Campo A., Nanofibrillar patterns on PET: The influence of plasma parameters in surface morphology, Plasma. Process. Poly., 2011, 8, 876-884. 10.1002/ppap.201000164Search in Google Scholar
[25] Fernandez-Blazquez J.P., Serrano C., Fuentes C., Campo A., Polymer Films Controlled by Mechanical Orientation, ACS Macro Letters., 2012, 1, 627-631. 10.1021/mz300027wSearch in Google Scholar
[26] Cho K., Takenaka K., Setsuhara Y., Shiratani M., Sekine M., Hori M., Effects of Irradiation with Ions and Photons in Ultraviolet--Vacuum Ultraviolet Regions on Nano-Surface Properties of Polymers Exposed to Plasmas, Jpn. J. Appl. Phys. 2012, 51, 8-12. Search in Google Scholar
[27] Wang C.Q., Zhang G.X., Wang X.X., He X.N., Surface modification of poly(ethylene terephthalate) (PET) by magnet enhanced dielectric barrier discharge air plasma, Surf. Coat. Tech. 2011, 205, 4993-4999. Search in Google Scholar
[28] Shin K., Park R.K., Yu L., Park C.Y., Lee Y.S., Lim Y.S., Han J.H., Improvement of single-walled carbon nanotube transparent conductive films using substrate pre-treatment, Synthetic. Met. 2011, 161, 1596. Search in Google Scholar
[29] K. Fricke, H. Steffen, T. von Woedtke, K. Schröder, K.-D. Weltmann, High Rate Etching of Polymers by Means of an Atmospheric Pressure Plasma Jet, Plasma Process. Polym., 2011, 8, 51-58. 10.1002/ppap.201000093Search in Google Scholar
[30] Novak, I., Popelka, A., Valentin, M., Chodak I., Spirkova M., Toth A., Kleinova A., Sedliacik J., Lehocky M.,Maronek M., Surface Behavior of Polyamide 6 Modified by Barrier Plasma in Oxygen and Nitrogen, 2014, 19, 31-38. Search in Google Scholar
[31] Kregar Z., Biscan M., Milosevic S., Vesel A., Inductively coupled RF oxygen plasma studied by spatially resolved optical emission spectroscopy, IEEE Trans. Plasma Sci., 2011, 39, 1239-1369. 10.1109/TPS.2011.2123111Search in Google Scholar
[32] Krstulovic N., Labazan I., Milosevic S., Cvelbar U., Vesel A., Mozetic M., Optical emission spectroscopy characterization of oxygen plasma during treatment of a PET foil, J. Phys. D: Appl. Phys., 2006, 39, 3799-3804. 10.1088/0022-3727/39/17/014Search in Google Scholar
[33] Junkar I., Cvelbar U., Vesel A., Hauptman N., Mozetic M., The role of crystallinity on polymer interaction with oxygen plasma, Plasma. Process. Poly., 2009, 6, 667-675. 10.1002/ppap.200900034Search in Google Scholar
[34] Grosse-Kreul S., Corbella C., Keudell A., Surface modification of polypropylene (PP) by argon ions and UV photons, Plasma. Process. Poly., 2013, 10, 1110-1119. 10.1002/ppap.201300078Search in Google Scholar
[35] H. Bahre, K. Bahroun, H. Behm, S. Steves, P. Awakowicz, M. Boke, C. Hopmann, J.Winter, Surface pre-treatment for barrier coatings on polyethylene terephthalate, J. Phys. Appl. Phys., 2013, 46, 8-12. 10.1088/0022-3727/46/8/084012Search in Google Scholar
[36] A. Vesel, M. Kolar, A. Doliska, K. Stana-Kleinschek, M. Mozetic, Etching of polyethylene terephthalate thin films by neutral oxygen atoms in the late flowing afterglow of oxygen plasma, Surf. Inter. Anal. 2012, 44, 1565-1571. Search in Google Scholar
[37] D.P Dowling, J. Tynan, P. Ward, A.M. Hynes, J. Cullen, G. Byrne, Atmospheric pressure plasma treatment of amorphous polyethylene terephthalate for enhanced heatsealing properties, Inter. J. Adhes. Adhes., 2012, 35, 1-8. 10.1016/j.ijadhadh.2012.01.025Search in Google Scholar
[38] K. Kutasi, R. Zaplotnik, G. Primc, M. Mozetic, Controlling the oxygen species density distributions in the flowing discharges, J. Phys. D. Appl. Phys., 2014, 47, 25203-25210. 10.1088/0022-3727/47/2/025203Search in Google Scholar
[39] A. Doliska, A. Vesel, M. Kolar, K. Stana-Kleinschek, M. Mozetic, Interaction between model poly(ethylene terephthalate) thin films and weakly ionised oxygen plasma, Surf. Inter. Anal., 2012, 44, 56-61. 10.1002/sia.3769Search in Google Scholar
© 2015 Ita Junkar et al.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.