SEARCH CONTENT

You are looking at 1 - 10 of 8,444 items :

  • Geosciences, other x
Clear All

Abstract

This article presents the methodology and results of single shear tests of bolt rods under dynamic impact loading generated by means of a drop hammer. Comparative analysis was also performed for bolt rod load capacity, stress and shear work under static and dynamic (impact) loading. The developed method of single shear testing of bolt rods under impact loading makes it possible to obtain repeatable test results concerning maximum bolt rod shearing force, shear stress and shear work values.

Comparative shear tests of four types of bolt rods under static and impact loading showed that the APB-type bolt rods made of AP770 steel, which was characterised by having the highest strength, exhibited the greatest shear work. AM22-type bolt rods exhibited a very similar work value. Though the AM22-type bolt rods made of A500sh steel demonstrated lower strength than the APB-type bolts, as well as a smaller diameter and cross section, they dissipated the impact energy better thanks to their higher plasticity. This could indicate the direction of optimisation for bolt rods in order to increase their impact strength.

Mathematical relationships were also formulated for selected tests, describing the real single shear courses F d =f(t) of bolts under impact loading. The obtained relationships could be applied in the load assessment process of bolt rods intended for use under roof caving, tremor and rock burst conditions.

Abstract

This article presents a modified incremental model describing pre-failure deformations of granular soils under classical triaxial conditions. The original shape of equations has been proposed by Sawicki and Świdziński [40, 41]. A new form of equations that are consistent with the proposed definitions of deviatoric loading and unloading is suggested. Triaxial tests necessary for calibrating the proposed model have been performed. The modified model is used to simulate the deformations and stability of sand for every pre-failure loading path and makes it possible to describe the behaviour of granular soil under both drained and undrained conditions.

A comparison of experimental and numerical results is presented. All investigations were performed in a classical tri-axial apparatus.

Abstract

The predominant culture of Sabah consists of a motley of cultures, each of which has been brought in by the different ethnic groups from their indigenous cultures. The total population of Sabah consists of more than thirty different ethnicities and races, and the number of languages and dialects go over eighty. Hence the cultural tourism in Sabah would have varied criteria that can be looked into. The aim of this paper is to use the scoring model in operational research to rank these decision criteria according to highest scores. The preferability of tourist visiting these hot spots is done by ranking their preferability based on a weightage. Highly scored attraction factors would attract more tourists to visit cultural spots in Kota Kinabalu. Therefore, these would help operational managers in the tourism industry to focus on promoting and marketing this sector.

Abstract

This paper presents an efficient method and its usage for the three-dimensional random bearing capacity evaluation for square and rectangular footings. One of the objectives of the study is to deliver graphs that can be used to easily estimate the approximated values of coefficients of variations of undrained bearing capacity. The numerical calculations were based on the proposed method that connects three-dimensional failure mechanism, simulated annealing optimization scheme and spatial averaging. The random field is used for describing the spatial variability of undrained shear strength. The proposed approach is in accordance with a constant covariance matrix concept, that results in a highly efficient tool for estimating the probabilistic characteristics of bearing capacity. As a result, numerous three-dimensional simulations were performed to create the graphs. The considered covariance matrix is a result of Vanmarcke’s spatial averaging discretization of a random field in the dissipation regions to the single random variables. The matrix describes mutual correlation between each dissipation region (or between those random variables). However, in the presented approach, the matrix was obtained for the expected value of undrained shear strength and keep constant during Monte Carlo simulations. The graphs were established in dimensionless coordinates that vary in the observable in practice ranges of parameters (i.e., values of fluctuation scales, foundation sizes and shapes). Examples of usage were given in the study to illustrate the application possibility of the graphs. Moreover, the comparison with the approach that uses individually determined covariance matrix is shown.

Abstract

This study presents the estimated remaining quantity of overburden material (topsoil, completely to highly weathered rock) and remaining geological reserve at Sibanyis Quarry, Kuching after the quarry has been operated for years. Desktop study including literature search was carried out prior field investigation. Three boreholes together with latest topographical and detail survey was conducted to obtain the latest data at Sibanyis Quarry, Kuching. Based on this Geological Reconciliation Study, the estimated total remaining geological rock reserve is 40,022,767 metric tons, and the weathered rock and top soil are 2,159,688 BCM and 1,247,697 BCM respectively. The assumptions that are taken into consideration are top soil thickness of 11m, weathered rock thickness of 15m and rock density of 2.64 mt/m3.

Abstract

The present study shows the results of a 2D local seismic response (LSR) analysis, simulated for a geomechanical model consisting of a layered carbonate rock mass with hypogean karst caves and a structural–lithostratigraphic complex setting, in an area within the Municipality of Turi (Apulia, Italy). In this case study a Distinct Element Code (DEM) code (UDEC) was used for the LSR simulations conducted on a model both in the absence and in the presence of two overlapping karst caves. The preliminary stress–strain model analysis show some tensile yielding points clustered on the roof of the upper karst cave, already in static conditions, and the phenomenon becomes even more noticeable in dynamic conditions. This is perfectly in agreement with the real occurrence of a sinkhole that brought to the light the underlying karst cave, in the case study area, in the recent past.

The amplification/deamplification factor (FA) was calculated as the ratio of the top value to the bottom value in the model, both of the max X-acceleration and of the spectral Fourier amplitude in three different ranges of frequencies, in order to estimate the effects of LSR on the X-component of the seismic input. According to the previous studies, the results obtained show a generalised deamplification of the seismic ground motion at the top of the model, both without and with underground karst caves, caused by the presence of the upper karst cave and by the seismic energy absorption because of layers’ discontinuity.

Abstract

In a piled-raft foundation, the interaction between structural elements and soil continuum can be simulated very precisely by numerical modeling. In the present study, 3D finite element model has been used to examine the settlement, load-sharing, bending moment, and shear force behavior of piled-raft foundation on different soil profiles for different load configurations and pile-raft configurations (PRCs). The model incorporates the pile-to-soil and raft-to-soil interactions by means of interface elements. The effect of parameters such as pile spacing and raft thickness are also studied. For any soil profile, larger pile spacing is observed to be more efficient in reducing the average settlement and enhancing the load-sharing coefficient. The smaller pile spacing is observed to be efficient in reducing the differential settlement. For any soil profile, the behavior of piled-raft foundation is significantly affected by the PRCs and load configurations. Furthermore, the raft thickness has significant effect on settlement, bending moment, and shears force. Thus, the results of the present study can be used as guidelines for analyzing and designing large piled-raft foundation.

Abstract

The results of studies of the crushing process in a double toggle jaw crusher are presented. This process was carried out on six sets of crushing plates. The first three of them are used in industrial crushers – plates with a flat working surface and a triangular profile (in this work, under consideration were profiles with teeth angle γ = 90°). The fourth and fifth type refer to plates with a variable pitch t and teeth height with a triangular shape of the teeth. In the sixth solution, plates with variable pitch and width of the wedged teeth are proposed.

The results of the basic process parameters are shown, that is, average degree of fineness n, technical performance Wt, crushing energy L and crushing force F, sieve analysis of crushing product. The obtained results are the basis for the assessment of the suitability of various types of plates, especially plates with a new profile, which have an altered shape in comparison with the plates used in crushers so far.

The crushing tests were carried out with the same dimension of outlet slot er = 24 mm, close to the pitch size for plates with triangular profile. Tests were performed on the “Mucharz” sandstone. Samples from a series of blocks of different size and geometric shape were prepared. This work also presents feed mass influence on crushing process efficiency.

The plates with variable pitch and width of teeth are beneficial because of lower crushing force and energy.

Abstract

Water infiltration through coal stocks exposed to weather elements represents a key issue for many old mining sites and coal-fired power plants from the environmental point of view, considering the negative impact on human health of the deriving groundwater, soil and air pollution. Within this context, the paper investigates the hydraulic behaviour of a self-weight compacted unsaturated coal mass and its impact on the numerical prediction of infiltration induced by rainfall events. In particular, the work focuses on the experimental investigation carried out at different representative scales, from the grain scale to physical modelling. The material, when starting from uncompacted conditions, seems to be characterized by metastable structure, which tends to collapse under imbibition. In addition, direct numerical predictions of the seepage regime through a partially saturated coal mass have been performed. As the compaction of the coal stock induced by dozers has not been taken into account, the numerical simulations represent a conservative approach for the assessment of chemical pollution hazard associated to water infiltration into a real stockpile under operational conditions.

Abstract

The problem of numerical simulation of the material interface response under monotonic and cyclic loading is of fundamental scientific and engineering importance. In fact, such interfaces occur in most engineering and geotechnical structures. The present work is devoted to the deformational response analysis of contact interfaces under monotonic and cyclic loads. The class of materials includes rock and structural joints, soil structure interfaces, masonry and cementitious joints, localized shear bands and so on.

The aim of the proposed model is to simulate the cyclic shear test under constant normal load. The associated dilatancy effect is associated with the configurational effects of asperity interaction or dilatancy of wear debris layer. The large primary asperities are assumed as responsible for interfacial dilation and small size asperities as governing frictional sliding and hysteresis response. The elliptic loading yield function is assumed to translate and rotate during progressive or reverse loading events. The model formulation is discussed and confronted with experimental data.