SEARCH CONTENT

You are looking at 1 - 10 of 7,148 items :

  • Process Engineering x
Clear All
Breakthrough in Design, Industrial Innovation Practices, and Education
Fundamentals

Abstract

In this paper, the effects of coupling agent and lignin extracted from waste cotton stalks in Xinjiang on thermal-oxygen aging properties of polypropylene (PP) composites were studied. The melt index test and indoor thermal oxygen aging test was carried out on the samples treated with coupling agent. The mechanical properties, surface micromorphology, rheological properties and element composition of the materials before and after 30 days of aging were studied. The results showed that the titanate coupling agent was the best for improving the melt index and mechanical properties of PP/cotton stalk lignin composites. After the 30-day thermal oxygen aging test, the samples with 2% lignin had the best impact strength and retention rate of fracture elongation, reaching 68.9% and 77.3% respectively. The sample with 3% lignin content had the smoothen surface, no crack appeared. After aging, the increase of C=O was the least, and the crystal peak area decreased less.

Abstract

Sodium lignosulfonate (SL) was prepared from waste of cotton lignin (CL) through hydrothermal reaction method. Orthogonal experiment was designed with value of OIT as objective function. Polypropylene (PP) is a polymer produced by the addition polymerization of propylene. It is a white waxy material with a transparent and light appearance, which is widely used in food and pharmaceutical packaging. The results of GPC and TG analysis revealed that SL has stable thermal properties, which means that SL has the potential to be an antioxidant for PP materials. In addition, the scavenging effects of CL and SL were studied. The obtained results exhibited that the SL can obviously increase the scavenging effect on free radicals and it is a kind of new synthetic antioxidant with antioxidant property, which could effectively delay the oxidation of PP. Subsequent rheological experiments proved that the SL/PP sample can improve the heat-resistant oxygen performance of PP under the thermal oxygen shearing environment. Combined with the effect of SL on the mechanical properties of PP before aging, SL has a stabilizing effect on PP thermal oxygen aging.

Abstract

The work presents the impact of reagents concentration and the drying process on the efficiency of obtaining magnesium hydroxide and its specific surface area. Magnesium sulphate(VI) within the concentration range of 0.7–2.0 mol/dm3 was used in the research as magnesium feedstock and sodium hydroxide was used as a precipitating agent within the same concentration range. The process of obtaining magnesium hydroxide was carried out with a 25% excess of the precipitating agent in relation to the reaction stoichiometry. The obtained suspension was separated by way of multi-stage sedimentation with the use of acetone and freezing samples. Depending on the concentration of reagents the efficiency of obtaining magnesium hydroxide fell within the range of 88–99%, whereas the specific surface area – within 115–609 m2/g, while the high purity of samples above 99% of magnesium hydroxide was maintained.

Abstract

SCMNPs@Uridine/Zn is utilized as an environmental-friendly and efficient heterogeneous nanocatalyst for two one-pot four-component condensation reactions, containing hydrazine hydrate, arylaldehyde, ethyl acetoacetate, and barbituric acid to yield tricyclic fused pyrazolopyranopyrimidine derivatives (5a-q), and hydrazine hydrate, arylaldehyde, malononitrile, and dimethyl acetylenedicarboxylate/diethyl acetylenedicarboxylate to yield 3-methyl carboxylate substituted pyrano[2,3-c]pyrazole derivatives (8a-y) under solvent-free conditions with high to excellent yields. The main advantages of this process are easy work-up, short reaction times, no chromatographic purifications, and recyclability of the catalyst for a minimum of six runs without any significant decrease in yields of the products. Also, the prepared catalyst SCMNPs@Uridine/Zn was synthesized and fully characterized by various techniques including Fourier transform infrared spectroscopy (FT-IR), energy dispersive X-ray (EDX), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and Raman spectroscopy.

Abstract

Ammonium nitrate (AN) is considered to be a very hazardous and difficult to handle component of mineral fertilizers. Differential thermal analysis coupled with thermogravimetry and mass spectrometry was used to determine the possible inhibiting effect of selected magnesium compounds on thermal decomposition of AN. Each additive was mixed with AN to create samples with AN:magnesium compound mass ratios of 4:1, 9:1 and 49:1. Most of analyzed compounds enhanced thermal stability of ammonium nitrate, increasing the temperature of the beginning of exothermic decomposition and decreasing the amount of generated heat. Magnesium chloride hexahydrate was determined to accelerate the decomposition of AN while magnesium sulphate, sulphate heptahydrate, nitrate hexahydrate together with magnesite and dolomite minerals were defined as inhibiting agents.

Abstract

A green procedure for the one-pot three-component synthesis of 1-amidoalkyl-2-naphthol and 3-amino-1-phenyl-1H benzo[f]chromene-2-carbonitrile derivatives from the reaction of 2-naphtol, aldehydes, and malononitrile/acetamide in the presence of a catalytic amount of Fe3O4@enamine-B(OSO3H)2 as an efficient and novel heterogeneous magnetic nanostructure catalyst is described. The catalyst was characterized using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). These strategies possess some merits such as simple work-up method, easy preparation of the catalyst, short reaction times, good-to-high yields, and non-use of hazardous solvents during all steps of the reactions. Moreover, due to the magnetic nature of the catalyst, it was readily recovered by magnetic decantation and can be recycled at least six runs with no considerable decrease in catalytic activity.