Skip to content
BY 4.0 license Open Access Published by De Gruyter September 18, 2019

Kinematics of the Lumbo–Pelvic Complex under Different Loading Conditions

  • Martin Weidling EMAIL logo , Christian Voigt , Toni Wendler , Martin Heilemann , Michael Werner , Jan-Sven Jarvers and Christoph-E. Heyde

Abstract

The lumbo-pelvic complex is a highly complex structural system. The current investigation aims to identify the kinematics between interacting bone segments under different loading conditions. A specimen of the lumbo-pelvic complex was obtained from a human body donor and tested in a self-developed test rig. The experimental setup was designed to imitate extension, flexion, right and left lateral bending and axial rotation to the left and to the right, respectively. The vertebra L3 was firmly embedded and load was introduced via hip joints. Using a digital image correlation (DIC) system, the 3D motions of 15 markers at different landmarks were measured for each loadcase under cyclic loading. For each loadcase, the kinematics were analyzed in terms of three-dimensional relative movements between L3 and the sacrum. The usefulness of the experimental technique was demonstrated. It may serve for further biomechanical investigations of relative motion of sacroiliac and vertebral joints and deformation of bony structures.

Published Online: 2019-09-18
Published in Print: 2019-09-01

© 2019 by Walter de Gruyter Berlin/Boston

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Downloaded on 22.2.2024 from https://www.degruyter.com/document/doi/10.1515/cdbme-2019-0087/html
Scroll to top button