Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
BY 4.0 license Open Access Published by De Gruyter November 26, 2020

In situ impedance measurements on postmortem porcine brain

Lucas Poßner EMAIL logo , Matthias Laukner , Florian Wilhelmy , Dirk Lindner , Uwe Pliquett , Bojana Petkovic , Marek Ziolkowski , Thomas R. Knösche and Konstantin Weise
From the journal Current Directions in Biomedical Engineering
https://doi.org/10.1515/cdbme-2020-3037
Download article (PDF)

Abstract

The paper presents an experimental study where the distinctness of grey and white matter of an in situ postmortem porcine brain by impedance measurements is investigated. Experimental conditions that would allow to conduct the same experiment on in vivo human brain tissue are replicated.

Keywords: Bioimpedance; Bioimpedance spectroscopy; Brain tissue
Published Online: 2020-11-26
Published in Print: 2020-09-01

© 2020 by Walter de Gruyter Berlin/Boston

This work is licensed under the Creative Commons Attribution 4.0 International License.

Download article (PDF)
From the journal
Current Directions in Biomedical Engineering
Current Directions in Biomedical Engineering
Volume 6 Issue 3

Journal and Issue

Articles in the same Issue

5G as enabler for Digital Healthcare
Towards an integrated emergency medical care using 5G networks
Requirements for 5G Integrated Data Transfer in German Prehospital Emergency Care
Telemedical consultation for remote islands
Requirement Analysis for an Aerial Relay in Emergency Response Missions
A novel combined level set model for automatic MR image segmentation
Investigating the influence of dielectric pads in 7T magnetic resonance imaging – simulated and experimental assessment
Novel Assistive Device for Tomographic Ultrasound Neck Imaging vs. Freehand
Impact of artificial airway resistances on regional ventilation distribution during airway closure
Global Inhomogeneity Index Evaluation of a DCT-based EIT Lung Imaging
A Deep-Learning Approach to Detect Fiducials in Planar X-Ray Images for Undistortion of Conventional C-Arm Images
Deep-learning based reconstruction of the stomach from monoscopic video data
A method to determine the radial compliance of porcine coronary arteries ex vivo via optical coherence tomography
EIT based intrathoracic pulsatile impedance measurements during apnea: a case study
Automated Cephalometric Landmark Localization using a Coupled Shape Model
Estimating regional pulmonary blood flow in EIT with regularized deconvolution with a Tikhonov regularization
Evaluation of the Impact of Static Interference on an Empirical Data Based Static Magnetic Localization Setup for Capsule Endoscopy
Manual versus Automatic Classification of Laryngeal Lesions based on Vascular Patterns in CE+NBI Images
Development of a biodegradable microstent for minimally invasive treatment of Fallopian tube occlusions
Sensitivity analysis of FDA´s benchmark nozzle regarding in vitro imperfections - Do we need asymmetric CFD benchmarks?
Dexamethasone release from photopolymerised PEGDA700 for cochlea drug delivery
Transfer activities for cardiovascular, ophthalmologic and otolaryngologic medical device innovations
Wearable Pressure Sensing for Vojta Therapy Guidance
Automated incisional hernia characterization by non-rigid registration of CT images – a pilot study
Optimization Framework to Identify Constitutive Law Parameters of the Human Heart
Sensitivity analysis of a computer model of neonatal oxygen transport
A rule-based expert system for real-time feedback-control in deep brain stimulation
Reduced order method for finite difference modeling of cardiac propagation
Developments in Modelling Bone Screwing
Analysis and visualisation of tremor dynamics in deep brain stimulation patients
Efficient Body Registration Using Single-View Range Imaging and Generic Shape Templates
Robot-assisted Ultrasound-guided Tracking of Anatomical Structures for the Application of Focused Ultrasound
Telemanipulation of an Articulated Robotic Arm using a Commercial Virtual Reality Controller
Approaches for Solution-Processed Encapsulation of Printed Medical Wearable Devices
Modelling and prototyping of a microfluidic cartridge for extracting immune cells from small volume blood samples
Novel dry electrode EEG headbands for home use: Comparing performance and comfort
In situ impedance measurements on postmortem porcine brain
Automatic Classification of the Movements of Directed and Undirected Subviral Particles
Cross-sectional analysis of tubular polymer semi-finished products using ultrasound in comparison with other measuring methods
Water uptake of various electrospun nonwovens
Investigations of flow alteration of commissural misalignment of TAVR using Particle Image Velocimetry
Development of a multi-well-chip for studying 2D and 3D tumor cell migration and spheroid growth in electrical fields
Degradable dual co-electrospun polyester based nonwovens for guided tissue regeneration
Immobilizing hydrolytic active Papain on biodegradable PLLA for biofilm inhibition in cardiovascular applications
Initial study on removing cellular residues from hydrostatic high-pressure treated allogeneic tissue using ultrasound
Protein Adsorption Hysteresis and Transient States of Fibrinogen and BMP-2 as Model Mechanisms for Proteome-Binding to Implants
Investigating dynamic-mechanical properties of multi-layered materials for biomedical applications
Development of UV-Reactive Electrospinning Method Based on Poly(ethylene glycol) diacrylate Crosslinking
PEGDA drug delivery scaffolds prepared with UV curing process
Comparison of Resistive and Optical Strain Measurement for Early Fracture Detection
Recognition of tenogenic differentiation using convolutional neural network
Dual-Lead 55 mm Impedance Pneumography
Smart 4D-printed implants and instruments
Polymeric stents for the Eustachian tube: development and human cadaver study
Transcatheter mitral valve repair devices - in vitro studies on the influence of device-width on mitral regurgitation
Development of a limbal fixation mechanism for a minimally invasive implantable glaucoma microstent
A pilot study: development of bonepreserving- biomimetic artificial femoral head cover
Wearable motion sensors and digital biomarkers in stroke rehabilitation
Wearable Impedance Pneumography
Measurement of respiratory rate with inertial measurement units
An alternative way to measure total lung capacity: a pilot study
First results of computer-enhanced optical diagnosis of bladder cancer
Raman Spectroscopy to Characterize Bladder Tissue for Multidimensional Diagnostics of Cancer in Urology
Metabolic Imaging by Simultaneous FLIM of NAD(P)H and FAD
A multispectral 3D-Endoscope for Cholesteatoma Removal
Semi-automatic decision-making process in histopathological specimens from Barrett’s carcinoma patients using hyperspectral imaging (HSI)
Detecting Bacteria on Wounds with Hyperspectral Imaging in Fluorescence Mode
Simulating a Ground Truth for Transit Time Analysis of Indicator Dilution Curves
Neurophotonic Scanning System – Towards Automatic Infrared Neurostimulation
Measurement of the retinal irradiation exposure during diaphanoscopic illumination
Developing an Intuitive and Feasible Setup for In-room Control During MRI-guided Interventions
Fully Data-Driven Pseudohealthy Synthesis for Planning Valve-Sparing Aortic Root Reconstruction using Conditional Variational Autoencoders
Novel flexible endoscope concept with swiveling camera tip
Proof of Concept for Ozone-Based Disinfection of Heater Cooler Units
Integration of antimicrobial substances in 3-D printed plastics
Durability and stability of antimicrobial coated surfaces
Clinical validation and efficacy of a temperature-controlled ventilation system (TcAF) in the OR to reduce surgical site infections
Relevance and implications of positioning analysis for infection-preventive effectiveness of ventilation systems with low-turbulence dis-placement flow
Real World Experience with an Optimized Control Scheme for a Ventricular Assist Device
Robust predictive control for respiratory CO2 gas removal in closed-loop mechanical ventilation: An in-silico study
A novel approach for increasing the traceability of 3D printed medical products
The evaluation of synthetic datasets on training AlexNet for surgical tool detection
Automatic Detection and Classification of Cough Events Based on Deep Learning
Standardization of in vitro testing for cardiovascular implants in the era of European Medical Device Regulation
Standardization of in vitro testing for cardiovascular implants in the era of European Medical Device Regulation
Medical Device Regulation and current challenges for the implementation of new technologies
Automatic Detection of Pediatric Craniofacial Deformities using Convolutional Neural Networks
Use of Electrical Impedance Spectroscopy to Distinguish Cancer from Normal Tissues with a Four Electrode Terminal Setup
Introducing a Linear Gamma Variate Fit to Measure Pulmonary Perfusion with Electrical Impedance Tomography
Actuation of a magnetically coated swimmer in viscous media with a magnetic particle imaging scanner
EEG-Based Classification of the Driver Alertness State
Digital process chains for patient specific medical devices
Machine learning based identification of elderly persons with cognitive impairment using dynamic time warping
Data Recording Framework for Physiological and Surgical Data in Operating Theatres
Knetex – Development of a textile-integrated sensor system for feedback-supported rehabilitation after surgery of the anterior cruciate ligament
Sensation thresholds in electrocutaneous stimulation
Machine Learning Techniques for Parkinson’s Disease Detection using Wearables during a Timed-up-and-Go-Test
A Concept for Context Awareness in Smart Environments
ForeSight - AI-based Smart Living Platform Approach
Contactless Interactive Fall Detection and Sleep Quality Estimation for Supporting Elderly with Incipient Dementia
The influence of strut-connectors in coronary stents: A comparison of numerical simulations and μPIV measurements
Method for assessment of matching of total ankle joint endoprostheses based on CT data
Evaluation of semi-supervised learning using sparse labeling to segment cell nuclei
Development of a realistic venepuncture phantom
DLP 3D printing of Dexamethasoneincorporated PEGDA-based photopolymers: compressive properties and drug release
Cell-derived Extracellular Matrix as maintaining Biomaterial for adipogenic differentiation
Multi-channel impedance analyzer for automated testing of networks and biomaterials
Optimization of online particle counting with a 3D-printed bubble trap
Study of poly(L-lactide) using Fast Scanning Calorimetry
Composite polyelectrolyte multilayers for biofunctionalization of medical devices
Fibrosis: Altered gene expression in TGF-β stimulated human fibroblasts of the Tenon
Wear and corrosion in medical applications
Computed fiber evaluation of SEM images using DiameterJ
Development of an in vitro measurement method for improved assessment of the side branch expansion capacity
Sulfated Hyaluronan coating of polyurethanebased implant materials
Systematic microscopic analysis of retrieved stents from a patient with pancreatic necrosis
Impact of aortic annulus geometry according to ISO 5840:2019 (draft) on hydrodynamic performance of transcatheter aortic valve prostheses
Accelerated Degradation of polymeric surgical suture materials
Permeability and wettability of bioresorbable nanofiber nonwoven membranes
Adaptable Superfibers as Implant Material
Printing of vessels for small functional tissues – a preliminary study
Evaluation of antibacterial properties of polyelectrolyte multilayer coatings by norm tests
Comparison of open versus endovascular surgical treatment of abdominal aortic aneurysm
Polyimide-based Thin Film Conductors for High Frequency Data Transmission in Ultra- Conformable Implants
Femoral Shape and Size Variability from segmented CT datasets for patient-specific THA planning
Use of artificial intelligence and neural networks for analysis and gesture detection in electrical impedance tomography
Quantification of Interpatient 12-lead ECG Variabilities within a Healthy Cohort
MagCPP: A C++ toolbox for Combining Neurofeedback with Magstim transcranial magnetic stimulators
Deep learning-based recognition of cell structures in fluorescence microscopy sequences with respect to their morphology on cells infected with Marburg virus
Evaluation of HRV estimation algorithms from PPG data using neural networks
Continuous signal quality estimation for robust heart rate extraction from photoplethysmographic signals
Investigating an Optimal Signal Epoch Length for Cardiotocographic Classification
An introduction to Acoustic Emission Analysis (AEA) based medical diagnostic techniques: Screening and Monitoring of cartilage defects in knee joint osteoarthrosis
Diagnostic Capabilities of a Smartphone- Based Low-Cost Microscope
Extension of the Stoichiometric Calibration of CT Hounsfield values to Metallic Materials
Compact Microscope Module for High- Throughput Microscopy
Validation of iterative CT reconstruction by inter and intra observer performance assessment of artificial lung foci
Determination of the Cavitation Pressure Threshold in Focused Ultrasound Wave Fields applied to Sonosensitive, Biocompatible Nanoparticles for Drug Delivery Applications
In Vivo Study on Magnetomotive Ultrasound Imaging in the Framework of Nanoparticle based Magnetic Drug Targeting
Validating a Numerical Simulation of Human Heart Motion Using Clinical Data
Simulation system for intraoperative neuromonitoring
Electrode Model and Simulation of His- Bundle Pacing for Cardiac Resynchronization Therapy
Transverse dose profile simulation of extruded lines for a 3D printed models for superficial skin cancer therapy
Web-based Prostate Visualization Tool
Swipe up to smoke less cigarettes! Introducing a mobile Approach-Avoidance Task Application to fight Smoking
Surgical Audio Guidance: Feasibility Check for Robotic Surgery Procedures
Psychometric test system for measuring cognitive reaction time
Progressive Dynamic Time Warping for Noninvasive Blood Pressure Estimation
Decomposition and modeling of signal shapes of single point cardiac monitoring
Endoscopic filter fluorometer for emission detection of Protoporphyrin IX and its direct precursors in PDT and PDD
Is a thin diameter ureteroscope feasible for image guided intravascular procedures?
Acoustic sensing of tissue-tool interactions – potential applications in arthroscopic surgery
HealthTEC Innovation Design - a proposal for a novel Master degree program based on Unmet Clinical Need, global Healthcare Challenges, and 21st century skills
How do we need to adapt Biomedical Engineering Education for the Health 4.0 challenges?
Investigation of vibration parameters for needle insertion force reduction
Workflow and Human-Centered Risk Analysis for Novel Mechatronic Rescue Aids I.
Workflow and Human-Centered Risk Analysis for Novel Mechatronic Rescue Aids II.
Microstructured ceramic and metallic implant surfaces and their impact on the viscosity of a synovia fluid substitute
High-Current Neutral Electrodes
Nurses’ attitudes towards occupational transformation processes brought about by digital care technologies
Downloaded on 1.2.2023 from https://www.degruyter.com/document/doi/10.1515/cdbme-2020-3037/html
Scroll Up Arrow