Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter April 20, 2021

Intermetallic Compounds in an Al-Si Alloy Used in High Pressure Die-Casting

  • M. Reza Ghomashchi
From the journal International Journal of Materials Research
https://doi.org/10.1515/ijmr-1987-781105
Published Online: 2021-04-20
Published in Print: 1987-11-01

© 2021 by Walter de Gruyter Berlin/Boston

From the journal
International Journal of Materials Research
International Journal of Materials Research
Volume 78 Issue 11

Journal and Issue

Articles in the same Issue

Analytische Feldionenmikroskopie als metallkundliches Standardverfahren der Legierungscharakterisierung
Differential-Scanning Calorimetry and Mössbauer Study of Phase Separation in Amorphous Ni-Pd-P Alloys
Influence of Heating Time on the Recrystallization of Two Aluminium Alloys
Experimental Methods for the Analysis of Transformation Cycles in Shape Memory Alloys
Intermetallic Compounds in an Al-Si Alloy Used in High Pressure Die-Casting
Phase Relations in the Section Ni3Al - Ni3Fe of the Al-Fe-Ni System
A Critical Review and Thermodynamic Calculations for the Al-Rich Portion of the Al-Cr-Fe Phase Diagram
Phase Equilibria in the Cu-Rich Corner of the Cu-As-Sn System
Chemical Ordering and Isentropic Temperatures in the Mg-Sb-Sn System
A Calorimetric Study of Solid Fe-Cr-V Alloys
Metastable Solidification of Fe-Rich Iron-Neodymium-Boron Alloys
Gesellschaftsnachrichten
Downloaded on 28.3.2023 from https://www.degruyter.com/document/doi/10.1515/ijmr-1987-781105/html
Scroll Up Arrow