Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter April 22, 2021

A New Experimental Approach to Metal Cutting

  • Hans Berns , Jingrong Liu and Werner Theisen
From the journal International Journal of Materials Research
https://doi.org/10.1515/ijmr-1996-870514
Published Online: 2021-04-22
Published in Print: 1996-05-01

© 2021 by Walter de Gruyter Berlin/Boston

From the journal
International Journal of Materials Research
International Journal of Materials Research
Volume 87 Issue 5

Journal and Issue

Articles in the same Issue

Inhalt
Editorial
Von der ersten deutschen Werkstoffschau 1927 zur Werkstoffwoche ’96
Aufsätze
Alloy Studies with X-rays and Neutrons
Continuous Microscopy of Ceramic Materials with Atomic Force Microscopy
Brittle Fracture Processes Modelled on the Atomic Scale
Static Restoration of Aluminium During Multi-stage Hot Rolling Simulation
Smart Materials - The “IQ” of Materials in Systems
Festigkeitsvorhersage bei Langfaserverbundwerkstoffen - Ein Überblick
Application of Thermodynamic Databases to the Evaluation of Surface Tensions of Molten Alloys, Salt Mixtures and Oxide Mixtures
Phase Equilibria in the Ni-Al-Ta System
The Effect of Low Pressure on Discontinuous Precipitation in Ni-7.5 at.% In and Ni-9 at.% Sn Alloys
Local Lattice Parameter Changes in Monoerystalline Turbine Blades Subjected to Service-like Conditions
A Description of High Temperature Deformation Behaviour of a γ-TiAl Based Alloy in Terms of the Effective Stress Model
A New Experimental Approach to Metal Cutting
Magnetron Sputtering for Metal Matrix Composite Processing
Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
Personen
Veranstaltungen
Terminkalender
Impressum
Downloaded on 31.3.2023 from https://www.degruyter.com/document/doi/10.1515/ijmr-1996-870514/html
Scroll to top button