Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter September 15, 2021

PPS News

From the journal International Polymer Processing
https://doi.org/10.1515/ipp-2020-1015
Published Online: 2021-09-15
Published in Print: 2021-09-27

© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany

From the journal
International Polymer Processing
International Polymer Processing
Volume 36 Issue 4

Journal and Issue

Articles in the same Issue

Contents
Regular Contributed Articles
Fiber Length Distribution in Twin-Screw Extrusion of Fiber-Reinforced Polymer Composites: A Comparison between Shear and Extensional Mixing
The Effect of Nanosilicates on the Performance of Polyethylene Terephthalate Films Prepared by Twin-Screw Extrusion
Synergistic Effect between Modified Graphene Oxide and Ammonium Polyphosphate on Combustion Performance, Thermal Stability and Mechanical Properties of Polylactic Acid
Basic Study of Extensional Flow Mixing for the Dispersion of Carbon Nanotubes in Polypropylene by Using Capillary Extrusion
Pulsed IR Heating of Thermoplastic Sheets for Thermoforming Applications
Novel Design and Comparison of Structural and Modal Analyses of Auxetic Geometry versus Honeycomb Geometry
Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene
Study on the Relationship between the Bonding Surface and Mechanical Properties of PLA/Epoxy Laminated Composites
A Study on Thermal and Electrical Conductivities of Ethylene-Butene Copolymer Composites with Carbon Fibers
Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity – Theory and Modelling
Using Symbolic Regression Models to Predict the Pressure Loss of Non-Newtonian Polymer-Melt Flows through Melt-Filtration Systems with Woven Screens
Preparation and Photo-Oxidation Aging Behavior of Oriented Polylactic Acid
Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding
PPS News
Seikei-Kakou abstracts
PPS Membership application
Downloaded on 20.3.2023 from https://www.degruyter.com/document/doi/10.1515/ipp-2020-1015/html
Scroll Up Arrow