Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter February 23, 2021

Strength of double-reinforced adhesive joints

Mehmet Şükrü Adin

Mehmet Şükrü Adin is a PhD candidate of the Department of Mechanical Engineering, University of Batman, Batman, Turkey. He received his master’s degree in Mechanical Engineering from the University of Batman in 2016. His research interests include mechanical properties of materials, composite materials, adhesive, adhesion and solid metal forming.

EMAIL logo
and Erol Kılıçkap

Erol Kılıçkap received his PhD degree from the University of Fırat in 2003, Elazığ, Turkey. He is currently an Associate Professor of Mechanical Engineering at Dicle University, Diyarbakır, Turkey. His research interests include the mechanical properties of materials and materials processing.

From the journal Materials Testing

Abstract

The use of adhesive joints is increasing in aerospace, aviation, automotive, construction and marine industry due to their easily applicable properties, low-costs and light weights compared to traditional jointing methods such as bolts, rivets, welding and soldering. Due to the high fatigue strength, resistance to seawater corrosion and light weight, aluminum alloys, with their high satiety, fracture strength, light weight, high specific strength and good dimensional stability and other properties, glass fiber reinforced composite materials have widespread uses.


Mehmet Şükrü Adin Mechanical Engineering Department Batman University Batman, 72060, Turkey

About the authors

Mehmet Şükrü Adin

Mehmet Şükrü Adin is a PhD candidate of the Department of Mechanical Engineering, University of Batman, Batman, Turkey. He received his master’s degree in Mechanical Engineering from the University of Batman in 2016. His research interests include mechanical properties of materials, composite materials, adhesive, adhesion and solid metal forming.

Erol Kılıçkap

Erol Kılıçkap received his PhD degree from the University of Fırat in 2003, Elazığ, Turkey. He is currently an Associate Professor of Mechanical Engineering at Dicle University, Diyarbakır, Turkey. His research interests include the mechanical properties of materials and materials processing.

Acknowledgement

The authors would like to thank Ihsan Pilatin, the lecturer of English at Batman University, for his contributions in correcting mistakes.

References

1 E. Koç: Machine elements, Volume I, Edition 5, Akademisyen Kitabevi, Ankara, Turkey (2013), pp. 1-416Search in Google Scholar

2 K. Turan, M. O. Kaman: Experimental failure analysis of wet-patch-repaired U notched composite plates, European Journal of Technique 6 (2016), pp. 152-159Search in Google Scholar

3 Ş. Çitil, Y. Ayaz, Ş. Temiz: Stress analysis of adhesively bonded double strap joints with or without intermediate part subjected to tensile loading, Journal of Adhesion 93 (2015), No. 5, pp. 343-356 DOI:10.1080/00218464.2015.107588510.1080/00218464.2015.1075885Search in Google Scholar

4 M. Y. Solmaz, A. Turgut: An experimental and numerical study on the effects of taper angles and overlap length on the failure and stress distribution of adhesively-bonded single-lap joints, Mathematical and Computational Applications 16 (2011), No. 1, pp. 159-170 DOI:10.3390/mca1601015910.3390/mca16010159Search in Google Scholar

5 H. Adin: The effect of angle on the strain of scarf lap joints subjected to tensile loads, AppliedSearch in Google Scholar

6 O. Sayman: Elasto-plastic stress analysis in an adhesively bonded single-lap joint, Composites Part B: Engineering 43 (2012), Issue 2, pp. 204-209 10.1016/j.compositesb.2011.08.006Search in Google Scholar

7 N. G. Tsouvalis, V. A. Karatzas: An investigation of the tensile strength of a composite-to-metal adhesive joint, Applied Composite Materials 18 (2011), pp. 149-163 DOI:10.1007/s10443-010-9137-z10.1007/s10443-010-9137-zSearch in Google Scholar

8 G. Di Franco, B. Zuccarello: Analysis and optimization of hybrid double lap aluminum-GFRP joints, Composite Structures 116 (2014), pp. 682-693 10.1016/j.compstruct.2014.05.044Search in Google Scholar

9 S. A. Titov, R. G. Maev, A. N. Bogachenkov: Pulse-echo NDT of adhesively bonded joints in automotive assemblies, Ultrasonics 48 (2008), No. 6-7, pp. 537-546 DOI: 10.1016/j.ultras.2008.07.00110.1016/j.ultras.2008.07.001Search in Google Scholar

10 A. Higgins: Adhesive bonding of aircraft structures, International Journal for Adhesives 20 (2000), No. 5, pp. 367-376 DOI: 10.1016/S0143-7496(00)00006-310.1016/S0143-7496(00)00006-3Search in Google Scholar

11 R. G. Budynas, J. K. Nisbett: Shigley’s Mechanical Engineering Design, Literature Publishing, Turkey (2015), pp. 498-516Search in Google Scholar

12 M. D. Aydın, Ş. Temiz, A. Özel: Experimental methods for determining the mechanical properties of structural adhesives, Engineer and Machinery 45 (2004), pp. 18-24Search in Google Scholar

13 W. Brockmann, P. Geiß, J. Klingen, B. Schröder, B. Mikhail: Adhesive bonding, Wiley–VHC, Weinheim, Germany (2009), pp. 125-200Search in Google Scholar

14 C. May: Epoxy resins: chemistry and technology, CRC Press, Boca Raton, Florida, USA (1987), pp. 653-710Search in Google Scholar

15 M. Y. Solmaz, T. Topkaya: Progressive failure analysis in adhesively, riveted, and hybrid bonded double-lap joints, The Journal of Adhesion 89 (2013), pp. 822-836 DOI: 10.1080/00218464.2013.76580010.1080/00218464.2013.765800Search in Google Scholar

16 J. W. McBain, D. G. Hopkins: On adhesives and adhesive action, Journal of Physical Chemistry 29 (1925), pp. 188-204 DOI: 10.1021/j150248a00810.1021/j150248a008Search in Google Scholar

17 K. L. Mittal: Adhesion aspects of metallization of organic polymer surfaces, Journal of Vaccum Science and Technology 13 (1976), pp. 13-19 DOI:10.1116/1.56885010.1116/1.568850Search in Google Scholar

18 C. Sarrado, A. Turon, J. Costa, J. Renart: On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints, International Journal of Solid Structures 81 (2016), pp. 110-116 DOI:10.1016/j.ijsolstr.2015.11.01610.1016/j.ijsolstr.2015.11.016Search in Google Scholar

19 A. Çalik, S. Yildirim: An investigation on the effect of parallel slot in bi-adhesive single lap joints with spew fillet, Journal of Engineering Research 3 (2015), No. 4, pp. 95-110 DOI: 10.7603/s40632-015-0036-110.7603/s40632-015-0036-1Search in Google Scholar

20 E. Tosun, A. Çalık: Failure load prediction of single lap adhesive joints using artificial neural networks, Alexandria Engineering Journal 55 (2016), pp. 1341-1346 DOI:10.1016/j.aej.2016.04.02910.1016/j.aej.2016.04.029Search in Google Scholar

21 J. Y. Cognard, L. Sohier, R. Créac’hcadec, F. Lavelle, N. Lidon: Influence of the geometry of coaxial adhesive joints on the transmitted load under tensile and compression loads. International Journal of Adhesion and Adhesives 37 (2012), pp. 37-49 DOI:10.1016/j.ijadhadh.2012.01.01310.1016/j.ijadhadh.2012.01.013Search in Google Scholar

22 M. A. Wahab: Fatigue in adhesively bonded joints: A review, ISRN Materials Science 2012, pp. 1-25 DOI:10.5402/2012/74630810.5402/2012/746308Search in Google Scholar

23 M. You, Z. M. Yan, X. L. Zheng, H. Z. Yu, Z. Li: A numerical and experimental study of adhesively bonded aluminium single lap joints with an inner chamfer on the adherends. International Journal of Adhesion and Adhesives 28 (2008), No. 1, pp. 71-76 DOI:10.1016/j.ijadhadh.2007.06.00110.1016/j.ijadhadh.2007.06.001Search in Google Scholar

24 K. Turan, M. O. Kaman: Progressive failure analysis in the single lap joints, Pamukkale University Journal of Engineering Sciences 16 (2010), No. 3, pp. 315-323Search in Google Scholar

25 O. Nemes, F. Lachaud: Double-lap adhesive bonded-joints assemblies modeling, International Journal of Adhesion and Adhesives 30 (2010), pp. 288-297 DOI:10.1016/j.ijadhadh.2010.02.00610.1016/j.ijadhadh.2010.02.006Search in Google Scholar

26 E. A. S. Marques, L. F. M. da Silva: Joint strength optimization of adhesively bonded patches, Journal of Adhesion 84 (2008), pp. 915-934 DOI:10.1080/0021846080250527510.1080/00218460802505275Search in Google Scholar

27 S. Fawzia, R. Al-Mahaidi, X. L. Zhao: Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP, Composite Structures 75 (2006), Issues 1–4, pp. 156-162 10.1016/j.compstruct.2006.04.038Search in Google Scholar

28 H. K. Lee, S. H. Pyo, B. R. Kim: On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints, Composite Structures 87 (2009), pp. 44-54 10.1016/j.compstruct.2007.12.005Search in Google Scholar

29 R. D. S. G. Campilho, M. F. S. F. de Moura, D. A. Ramantani, J. J. L. Morais, A. M. J. P. Barreto, J. J. M. S. Domingues: Adhesively bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches, The Journal of Adhesion 86 (2010), No. 5-6, pp. 649-670, DOI:10.1080/00218464.2010.48431810.1080/00218464.2010.484318Search in Google Scholar

30 Ş. Çitil, Ş. Temiz, H. Altun, A. Özel: Determination of mechanical properties of double-strap adhesive joints with an embedded patch, Journal of Adhesion Science and Technology 25 (2011), No. 18, pp. 2555-2567 DOI:10.1163/016942411 × 58022510.1163/016942411 × 580225Search in Google Scholar

31 R. K. Ergün: Experimental and numerical investigation of the effect of repairing elliptical perforated aluminum plates by composite patches on stress behavior, MSc Thesis, Kahramanmaras Sütçü İmam University, Kahramanmaraş, Turkey (2014), pp. 21-26Search in Google Scholar

32 Ş. Baday, H. Başak, F. Sönmez: The assessment of cutting force with Taguchi design in medium carbon steel–applied spheroidization heat treatment, Measurement and Control 50 (2017), No. 4, pp. 89-96 DOI:10.1177/002029401771376710.1177/0020294017713767Search in Google Scholar

33 G. Taguchi: Systems of experimental design – quality resources, Vol. 1-2, Kraus International Publications, New York, USA (1987), pp. 205-633Search in Google Scholar

34 G. Güral: Optimization of process parameters in gasification source, Graduate Thesis, Dokuz Eylül University Graduate School of Natural and Applied Sciences, İzmir, Turkey (2003), pp. 1-70Search in Google Scholar

35 İ.Türkmen, R. Gül, C. Çelik: A Taguchi approach for investigation of some physical properties of concrete produced from mineral admixtures, Building and Environment 43 (2008), pp. 1127-1137 DOI:10.1016/j.buildenv.2007.02.00510.1016/j.buildenv.2007.02.005Search in Google Scholar

36 R. N. Kackar: Off-line quality control, parameter design and Taguchi method, Journal of Quality Engineering 17 (1985), pp. 176-209 DOI:10.1007/978-1-4684-1472-1_410.1007/978-1-4684-1472-1_4Search in Google Scholar

37 M. Savaşkan, Y. Taptık, M. Ürgen: Performance optimization in drill tips with experimental design method, İTÜ Magazine for Engineering 3 (2004), No. 6, pp. 117-128Search in Google Scholar

38 D. C. Montgomery: Design and analysis of experiments, D. C. Montgomery (Ed.): Introduction to Statistical Quality Control, John Wiley & Sons, New York, USA (2001), pp. 602-628Search in Google Scholar

39 B. Gever, B. N. Güneş, D. Gülel, E. B. Ataseven, Ö. Saatçıoğlu, Z. S. Bebek: Comparison of Taguchi approach with multiplicative design using the data of a manufacturing operation, Journal of Industrial Engineering 26 (2014), No. 19, pp. 2-26Search in Google Scholar

Published Online: 2021-02-23

© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany

Downloaded on 30.11.2022 from frontend.live.degruyter.dgbricks.com/document/doi/10.1515/mt-2020-0024/html
Scroll Up Arrow