Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter February 13, 2021

BEZUGSQUELLEN

From the journal Materials Testing
https://doi.org/10.1515/mt-2020-621218
Published Online: 2021-02-13
Published in Print: 2020-12-01

© 2020 by Walter de Gruyter Berlin/Boston

From the journal
Materials Testing
Materials Testing
Volume 62 Issue 12

Journal and Issue

Articles in the same Issue

CONTENTS
Materials Testing
FACHBEITRÄGE
Wear and corrosion behavior of Mg-based alloy reinforced with TiC and ZrC particles
Corrosion resistance of hoisting ropes
Effect of milling on the microstructure and mechanical property of austenite stainless steel
Numerical simulation of the crush behavior of tapered tubes
FEA of SAW penetration of Ramor 500 steel
Metallurgical characterization of mechanically alloyed MoNiAl-WC reinforced Fe matrix composite
Friction and wear performance of a copper-based bond emery wheel for rail grinding
Experimental determination and numerical modeling of the stiffness of a fastener
Influence of electron beam welding parameters on the weld seam geometry of Inconel 718 at low feed rates
Mechanical behavior of composite pipes joined with non-embedded and embedded adhesive layers
Wear properties of WC–Co and WC–CoCr coatings applied by HVOF technique on different steel substrates
Effect of ultrasonic melt treatment on the tribological behavior of 7075 aluminum alloy
Effect of TiN particle size on wear behavior of SiAlON-TiN composites
Turning machinability of alloyed ductile iron compared to forged EN 1.7131 steel
Numerically modeling spring back and spring go amounts and bending deformations of Cr-Mo alloyed sheet material
BEZUGSQUELLEN
IMPRESSUM
Downloaded on 30.11.2023 from https://www.degruyter.com/document/doi/10.1515/mt-2020-621218/html
Scroll to top button