Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Publicly Available Published by De Gruyter May 23, 2021

Frontmatter

From the journal Materials Testing
https://doi.org/10.1515/mt-2021-frontmatter5
Download article (PDF)
Published Online: 2021-05-23
Published in Print: 2021-05-26

© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany

Download article (PDF)
From the journal
Materials Testing
Materials Testing
Volume 63 Issue 5

Journal and Issue

Articles in the same Issue

Frontmatter
Materials testing for welding and additive manufacturing applications
Fracture characterization and modeling of Gyroid filled 3D printed PLA structures
Component-oriented testing and simulation
Experimental and numerical investigation of cutting forces during turning of cylindrical AISI 4340 steel specimens
Modeling and simulation in materials testing
Mechanical behavior of composite parts joined through different processes
Materials testing for welding and additive manufacturing applications
Effect of TIG welding parameters in joining grade 2 pure titanium
Materialography/chemical resistance testing
Precipitated phase in the β phase of IN783 alloy
Component-oriented testing and simulation
Notch (stress concentration) factor estimation of a cylinder under internal pressure using different approaches
Materials testing for joining and additive manufacturing applications
Effect of fiber orientation angle on patch repaired composite plates
Component-oriented testing and simulation
A comparative analysis of the queuing search algorithm, the sine-cosine algorithm, the ant lion algorithm to determine the optimal weight design problem of a spur gear drive system
Comparison of the arithmetic optimization algorithm, the slime mold optimization algorithm, the marine predators algorithm, the salp swarm algorithm for real-world engineering applications
A novel hybrid marine predators-Nelder-Mead optimization algorithm for the optimal design of engineering problems
Wear testing
Wear behavior of rice straw powder in automotive brake pads
Mechanical testing/chemical resistance testing
Effects of MgO Powder addition on mechanical, physical and thermal properties of Al waste bagasse composite
Wear testing
Short term tribological behavior of ceramic and polyethylene biomaterials for hip prosthesis
Production-oriented testing
Experimental validation of the predicted peak cutting force for seafloor polymetallic sulfide
Downloaded on 29.9.2023 from https://www.degruyter.com/document/doi/10.1515/mt-2021-frontmatter5/html
Scroll to top button