Similarities and Differences Between Italian Early Neolithic Groups: The Role of Personal Ornaments


 The Early Neolithic is an interesting period for observing the changes that took place in material culture and also in the ideology that influenced the production of personal ornaments. Objects of adornment are useful for understanding how past peoples differentiated themselves on the basis of gender, age, or group affiliation. The Early Neolithic in Italy developed throughout the entire sixth millennium cal. BC, during which the first farming communities settled in the Italian peninsula and islands, with diverse Neolithic groups related to wider-ranging cultural spheres. Early Neolithic ornaments were mainly ring bracelets, manufactured beads and perforated shells or teeth. Through their choice and the raw materials used for their production, individuals and groups emphasized their diverse identities based on shared traditions. Focusing on some of the more significant sites, this article considers similarities and differences in forms and raw materials employed for ornaments by different Early Neolithic groups and how these could have been useful attributes to emphasise identities and in particular the membership of particular social or cultural groups.


Introduction
The Neolithic is an interesting period for observing the changes that affected the material culture and the ideology of prehistoric groups. During its early phase, the production of personal ornaments improved; new types and a greater variability of forms and raw materials are found compared to the previous period (Bar-Yosef Mayer, 2013;Martínez-Sevilla et al., 2021;Rigaud, d'Errico, & Vanhaeren, 2015). The increase and spread of these objects were certainly due to innovations in the social organization of Neolithic communities determined by the development of farming, animal husbandry, and settled villages (Cauvin, 1994;Chapman & Gaydarska, 2011;Robb, 2007;Whittle, 1996), as well as being consequences of the changes in craft production, exchange networks, and raw material procurement, which strongly influenced the material culture and subsistence of Neolithic groups (Baysal, 2019;Micheli, 2012a;Wright & Garrard, 2003).
The development of the production of elaborate ornaments, based on new geometric shapesoften standardized and obtained by transforming existing natural forms, was undoubtedly the most important innovation in the field of body adornment in the period. The manufacturing of disc-shaped or cylindrical beads, as well as ring bracelets, requires knowledge of specific processes related to abrasion, polishing, and perforation techniques that call for careful planning and manual skills and derive from developments in the production of polished and ground stone tools. The technological complexity of ornament production reveals in many cases the beginnings of craft specialization and the social organization that underlay it (Bar-Yosef Mayer, 2013;Bonnardin, 2009;Martínez-Sevilla, 2019;Wright & Garrard, 2003;Wright et al., 2008). Although stone ornaments appeared at the end of the Palaeolithic, manufactured stone beads and rings increased in frequency from the earlier phases of the Neolithic, expanding the range of stones and minerals used and the colours of the raw materials available. Thus, the range and the diversity of coloured personal ornaments, which before the Neolithic consisted mainly of perforated shells and teeth, was significantly enlarged from this period onwards by the production of stone ornaments (Bar-Yosef Mayer & Porat, 2008;Baysal, 2019;Micheli, 2012a). The appearance of new decorative objects made possible new modes of personal adornment and probably the conveyance of new symbolic messages through ornaments as an effect of emerging social identities forged in the first farming communities.
The formation of Po Plain Neolithic groups can be explained taking into account multiple factors and the interaction of different peoples and traditions, in which even a late Mesolithic component played some roles, although its real influence has recently been debated (Biagi, 2003;Binder, 2000;Pearce, 2013;Pessina & Tiné, 2008;Pessina, 1998;Starnini et al., 2018). The combination of these aspects gave rise between c. 5600/5500 and 4700/4600 cal. BC to the cultural variety of the Po Plain Neolithic groups, recognized mainly on the basis of their site names or some regional characterization: Fiorano, Friulian groups, Isolino, Vhò, and Gaban (Biagi et al., 2020;Improta & Pessina, 1998;Pessina, 1998;Starnini et al., 2018). The Vasi a Coppa or Vlaška group in the Trieste Karst is often associated with the latter groups, although it has a particular location at the edge of Italian territory and a diverse origin that is not yet well understood (Ferrari et al., 2018). In the area occupied by Incised Lines Ware (Ceramica a Linee Incise) groups in central Italy, it is also possible to recognize some regional variants, probably influenced by the Fiorano group in northern Tuscany and by other local traditions in the southern territories (Fugazzola Delpino et al., 1999;Grifoni Cremonesi, 1992;Pessina & Tiné, 2008). The Catignano group in Abruzzo marks the transition from late Impressed Ware features to those of painted figulina pottery (Radi & Tozzi, 2009).
In this multifaceted picture, personal ornaments for bodily adornment also show a mainly twofold division. The two cultural spheres remained substantially independent from each other and preserved their own characteristic material cultures even though there were contacts between some groups ( Figure 2). This article considers cultural similarities and differences between these two groupings, with a particular focus on the role of personal adornments and on how this contrast was expressed through the selection and manipulation of particular raw materials and forms.
The Early Neolithic of Italy embraced a long period of time, was characterized by various neolithization events, and featured several groups of diverse importance and chronology. Despite the many sites that are known and the numerous 14C dates available, there are few well-preserved stratigraphic sequences that allow the definition of a reliable chrono-cultural framework for this period. In this context, personal ornaments attracted scarce attention in the archaeological literature until a few years ago. Furthermore, since they are generally uncommon, their occurrence varies widely between sites, and abundant discoveries are exceptional, the statistical analysis of adornment objects to compare the data available for various groups is unfortunately not possible. The following observations are therefore based on a descriptive comparison of the assemblages, so as to offer some insights on personal ornaments and the categorization of body adornments in Early Neolithic groups. Personal ornaments and body decoration are very important in almost all traditional societies from prehistoric to modern times, since both are closely associated with people themselves. Ornaments are fascinating objects to wear, accumulate, or exchange. It follows that they may have had various uses in each group, with different social, economic, or symbolic implicationsas suggested by the use of stone rings in different Neolithic contexts for example (Fromont, Hérard, & Hérard, 2010;Gebel, 2010;Martínez-Sevilla et al., 2021;Pétrequin et al., 2015bPétrequin et al., , 2019. In this article, the ornaments are interpreted as personal adornment items related to the decoration of the body or garments. Since ornaments are key elements for highlighting aspects of the personhood of individuals (Fowler, 2004), they reveal the multiform ways in which past peoples paid attention to their appearance and adorned themselves to stress their identity and to attract the social attention of others. In fact, human beings have always considered their bodies as a natural support for decoration and transformation, to convey symbolic meanings. Besides, the great diversity of personal adornments suggests a ubiquitous effort to mark the distinction between what is natural and what is instead a cultural, symbolic product (Cordwell, 1979;Bartholeyns, 2011;Baysal, 2019). Early Neolithic ornaments are not very common in Italy compared to other contemporary European Neolithic contexts, or indeed to other phases of Italian prehistory. Moreover, there is an evident divergence between the Impressed-Cardial Ware siteswith small but often variegated assemblagesand those of Po Plain Neolithic, Incised Lines Ware, and Catignano groups, where ornaments are commonly isolated or rare finds ( Figure 3). In addition, well-preserved Early Neolithic burials have not yet furnished ornaments. Since the data are not homogeneous and sites with ornaments are geographically dispersed and often distant in time from each other, the scarce information available is useful but incomplete evidence concerning body adornment traditions. However, despite these difficulties, a general analysis and some interpretations regarding the use and importance of personal ornaments in Early Neolithic Italy are proposed in the following sections (for details about site and ornament distributions, see Supplementary Materials).

Personal Ornaments in the Impressed-Cardial Ware Complex
Ornaments of the Impressed-Cardial Ware complex have been found in settlement and cave sites not associated with mortuary practices. Consequently, there is little or no information about the relationships between personal ornaments and their use on the body (Grifoni Cremonesi, 2002Conati Barbaro, 2008;Zemour, 2011). The available data from settlements provide some general trends confirmed by recurrences and similarities from distant areas where the Impressed-Cardial Ware complex occurs; sites are often located right on the coast or nearby, as in the Tyrrhenian area and Liguria, or in inland plains or along river valleys in the southern regions (Grifoni et al., 2000;Manfredini, 2002;Pessina & Tiné, 2008). Marine resources were intensely exploited in some areas for human nutrition and the manufacture of everyday tools and objects for adornment (Bisconti, 2007;Borrello, 2003Borrello, , 2005Cade, 1999;Cataliotti-Valdina, 1999;Ghisotti, 1997;Mannino et al., 2007;Nonza, 2000). Such ornaments were mainly perforated shells, among which Columbella rustica, or the dove snail, is dominant in some sites. Perforated teeth and bones are uncommon, while the incidence of elaborate ornaments, such as beads, pendants, and ring bracelets manufactured from stone or shell, is limited but known since the early phases (Micheli, 2002).
Impressed-Cardial Ware groups produced ornaments mainly from shells, although other local raw materials were also used, but less frequently ( Figure 3). C. rustica is common in many sites, and specimens usually feature a hole in the dorsal part and sometimes lack the apex; a few other gastropod and bivalves shells are also attested. Conus and Cyclope shells are the most common perforated gastropods, while Acathocardium/Cardium, Cerastoderma, and Glycymeris are the bivalves most often used (Micheli, 2002(Micheli, , 2012a. Perforated C. rustica shells are found in the earlier Impressed Ware levels in some southern sites, such as at Torre Sabea (Radi, 2003) and San Michele di Saracena Cave (Figure 4(1-12)) and in Liguria in Arene Candide Cave where they occur in the earlier layers and in the subsequent Cardial phase (Bernabò Brea, 1946, 1956Borrello, 2003;Micheli, Panelli, Rossi, & Maggi, in press;Traversone, 1999). Dove shells are also well known during the latter phase in some other Tyrrhenian Cardial Ware sites located on islands. Perforated bivalves are not numerically abundant in each site, but their distribution suggests a concentration in some area, for example, in Abruzzo and Sicily where it would have been easier to find these shells on the sandy beaches.
Other ornaments made from hard animal parts were perforated teeth and bones. Most pendants were canines of small carnivores or complete or fragmented Sus tusks; some perforated metapodials and small phalanges are also known. Nevertheless, these elements are rare or totally absent in southern and Tyrrhenian sites, while they seem more significant in central Italy in Adriatic Impressed Ware sites with mainly canines of canids, dog or fox, and Sus tusks. Fox canines are attested exceptionally in Sicily (Tusa, 1997) and also at Cala Pisana on the island of Lampedusa, where these animals seem never to have lived (Radi, 1972). Perforated canid teeth and hare metapodials were also found, as well as red deer atrophic canines. Despite this, some bone pendants mimicking atrophic canines were discovered in Sant'Angelo Cave (Grifoni Cremonesi, 1996), San Michele di Saracena Cave (Figure 4(14)), and Uzzo Cave (Tusa, 1997), demonstrating the addition to the ornament assemblage of an apparently natural component, which is in fact a man-made artefact.
The production of elaborate ornaments stems from changes in craft production, exchange networks, and raw material procurement. Shell or soft stone disc, barrel, and cylindrical beads appear in Early Impressed Ware contexts from the early centuries of the 6th millennium cal. BC (Figure 4(15 and 16)). Disc-shaped shell beads were obtained from Acanthocardia/Cardium or Cerostoderma valves, while thicker (1-7 and 13) from Early Impressed Ware layers; (8-12 and 14-17) from Stentinello layers (after Natali, Agrostelli, Feriozzi, Forgia, & Micheli, in press).
barrel or cylindrical beads (Figure 4(17)) could be produced from larger and thicker shells (Spondylus or Charonia). In some southern Early Impressed Ware and also in later Tyrrhenian Cardial contexts, finished and unfinished stone beads have been found in small numbers. Among these, the presence of steatite beads is noteworthy because it attests an initial organized exploitation of this materialfor which supply areas in Italian territory are limitedfor the production of ornaments.
The spread of rings is associated with several cultural groups, especially in the northern and central regions where stone specimens, together with shell and some in bone, were important items of body adornment of Po Plain Neolithic, Incised Lines Ware, and also Catignano groups (Martínez-Sevilla et al., 2021;Micheli, 2012b;Ribero, 2017;Tanda, 1977). However, the oldest Italian specimen so far discovered is a Spondylus shell ring found at Torre Sabea (Radi, 2003) and dated to the beginning of the 6th millennium cal. BC ( Figure 5(1)). Ring bracelets, however, do not seem to have enjoyed much favour among the Italian Impressed Ware groups. In fact, the only evidence of shell ring manufacturing so far documented in the Impressed-Cardial Ware sites is a large cut-out Spondylus valve found recently in the Cardial Ware deposit at Arene Candide Cave ( Figure 6). This object, interpreted as a discoid blank for a ring bracelet, indicates the possible initial production of these ornaments in the Early Neolithic. Abundant shell ring manufacturing remains are found in the Square Mouthed Pottery phase layers in the same cave (Borrello & Rossi, 2005;Borrello & Micheli, 2011).
Arene Candide Cave has yielded useful data on the Early Neolithic in Liguria and parallels with both Tyrrhenian and French contexts. In fact, this cave preserves one of the largest collections of Neolithic ornaments characterized by the prevalence of shell objects (Borrello & Rossi, 2005;Borrello, 2003;Micheli, 2005;Micheli et al., in press;Traversone, 1999). The excavations carried out here have brought to light certain characteristic shell pendants documented so far only in Liguria (Figure 7). These objects vary in shape and size and are of great aesthetic value, such as the specimen obtained from a Charonia valve, which was recently found in the Impressed Ware levels dated to c. 5800-5600 cal. BC (Figure 7(2)). This discovery is noteworthy because the artefact in question constitutes the missing half of another fragment found in the 19th century in the same cave and now kept in the Genova-Pegli Museum (Figure 7(5)). Further evidence in favour of the Impressed Ware attribution of these objects is a smaller arched Spondylus shell pendant previously found in the same cave in layer 26C (Figure 7(4)). Additional disc and arched or semilunate pendants of uncertain cultural attribution were discovered in the course of the 19th century investigations  of the cave's Neolithic deposits (Bernabò Brea, 1946, 1956Borrello, 2005;Taborin, 1974). Since these ornaments have no parallels from other Impressed-Cardial Ware contexts, with the exception of a single isolated find from Passo di Corvo in Apulia (Tiné, 1983), they demonstrate that a local ornament tradition originated within this Early Neolithic group in western Liguria.

Personal Ornaments in Po Plain Neolithic, Incised Lines Ware and Catignano Groups
In the area occupied by Po Plain Neolithic and Incised Lines Ware groups, ornaments are uncommon except for ring bracelets. In northern Italy, perforated C. rustica and Cyclope neritea shells are only found in Trentino where perforated atrophic canines have also been found (Borrello & Dalmeri, 2005;Pedrotti, 1998). The presence of these shells in the Adige Valley in the middle of the mountains points to the spread of material of Mediterranean origin, from the Ligurian Sea in particular, through the Po Valley and Lake Garda. Other shell ornaments come from the Vhò and Fiorano sites, where a few fossil Glycymeris and Dentalium (tusk) shells were found. These shells were collected from some of the numerous Plio-Pleistocene fossil shell deposits in the Apennines; it is not possible to determine with certainty the exact supply area (Micheli, 2005). Furthermore, the excavations carried out at Lugo di Romagna have added an interesting small assemblage, which provides new data about the eastern margins of the Fiorano group, including stone and bone ring bracelets, a discoid stone ring blank, a perforated dog premolar, some perforated bivalves (Glycymeris), a gastropod shell (Nassarius reticulatus), and many tusk shells collected from the nearby Adriatic coast (Micheli, 2018). Perforated marine shells together with some fossil tusk shells of Apennine origin were also used as ornaments by the Incised Lines Ware group in Tuscany (Grifoni Cremonesi, 1992). Among elaborate ornaments, manufactured disc-shaped beads are unusual throughout the territories of the Po Plain Neolithic, Incised Lines Ware and Catignano groupswhere instead ring bracelets are characteristic ornaments (Figure 8(1)). The latter is uncommon in the Impressed-Cardial Ware complex, except for some shell specimens that appear only in Liguria during the late Cardial Ware horizon in Pollera Cave (Odetti, 1991) and later in early Square Mouthed Pottery culture contexts (Micheli, 2012a;Ribero, 2017;Tanda, 1977). Stone specimens are circular, subcircular, or oval in shape, with a triangular or a drop-shaped section; in northern Italy, they were made mainly from metamorphic rocks and in particular from some "greenstone" lithotypes, while in central Italy, other stones are also used in addition to examples mentioned earlier. The appearance of these rings also in central Italy in areas distant from the northern regions where their main Italian core zone seems to have been shared traditions and confirms relationships among the Po Plain Neolithic, Incised Lines Ware, and Catignano groups.

Mortuary Practices and Personal Ornaments During the Early Neolithic
Funerary practices are fascinating because they can shed light on a people's conception of death and the afterlife and on the social identities and personhood of individuals. In this regard, tombs are the best context for improving our knowledge of the interrelatedness of people, objects, and places. Personal ornaments found inside them acquire significance because they are closely associated with individuals and their biographies (Baysal, 2019;Bonnardin, 2009;Fowler, 2004;Jeunesse, 1997). In southern Italy, mortuary practices are characterized by single inhumation burials in shallow cuts in open-air settlements, while in central Italy, there are also burials of disarticulated bones in caves. Tombs are not numerous, and grave-goods and personal adornments are usually absent, as for example in southern Impressed Ware burials (Conati Barbaro, 2008;Grifoni Cremonesi, 2002. Therefore, ornaments do not seem to have been particularly significant in death for Impressed Ware peoples in Italian territory. This situation differs from that documented in southern France, where Early Neolithic burials contain grave goods and personal ornaments including beads, pendants, and bracelets made from shells, bone, and stone (Beyneix, 1997;Zemour, 2011;Zemour et al., 2017). Early Neolithic graves are unknown in northern Italy, while in the centre, some Incised Lines Ware burials occur with scattered grave goods and personal ornaments in Fontino, Orso, and Lattaia caves, but since these were disturbed contexts, they do not provide much useful information (Bagolini & Grifoni Cremonesi, 1994). Patrizi Cave in Latium is an exception: it preserved the famous burial of an adult male with a trepanned skull and contained a single perforated sheep metacarpal, interpreted as a pendant and not directly associated with the skeletal remains (Grifoni Cremonesi & Radmilli, 2002).

Personal Ornaments in the Early Neolithic
The data briefly presented highlight a distinction between Impressed-Cardial Ware groups on one hand and Po Plain Neolithic and related central Italian groups on the other hand regarding their use of adornment objects, indicating different ornamental traditions (Figure 3). The absence of funerary evidence where individuals and ornaments are directly associated constitutes a limitation for our analysis, which considerably reduces the possibility of delineating the personal identities of the Early Neolithic peoples settled in Italy. However, Early Neolithic ornaments provide some interesting insights into Neolithic body adornment. These objects include beads and ring bracelets; the former consists simply of perforated shells and animal teeth, together with beads manufactured from stone and shell. These elements could be joined together, in sequences of one bead type only or as mixed compositions in necklaces, bracelets, and anklets, or fixed as ornamental applications on garments or textiles. Ring bracelets, instead, could be worn directly around the wrist or arm above the elbow. It is thus possible to recognize diverse modes of use of ornaments according to the different ways of hanging, fixing, or wearing them. These probably reflected diversities in bodily adornment that were expressions of cultural differences between groups, highlighting membership and personal identities. Furthermore, the distinction between natural ornaments and manufactured objects suggests ubiquitous attempts to differentiate between what is natural and not yet domesticated and what is instead a man-made, cultural product or an already domesticated item.
C. rustica is common in diverse Impressed-Cardial Ware sites in Italy and southern France, in localities not far from the coasts, while it becomes less frequent moving inland (Barge, 1987;Courtin, 2000;Taborin, 1974). Conversely, comparisons with the Impressed Ware groups of the eastern Adriatic are lacking because in the Dalmatian sites ornaments are very rare and take the form of a few perforated bivalve shells (Micheli, 2014;Müller, 1994). Among the northern Neolithic groups, C. rustica is found only in Trentino in some Gaban group sites, where the acculturation of the indigenous foragers seems more evident (Pedrotti, 1998).
C. rustica lives in shallow water throughout the Mediterranean in the infralittoral zone. Dove shells prevail in Neolithic sites probably because they were valuable ornamental objects due to their shapes and colouring. These shells probably fascinated Neolithic collectors, who found them easy to gather from areas of shallow water or from thanatocenoses on beaches (Perlès, 2016). Therefore, their frequency does not seem to be fortuitous, but rather related to a specific preference, a pointer to the specific ornamental traditions of Impressed-Cardial groups. Although in the beach deposits many shell species would have been available, C. rustica was preferred to other small-sized gastropods, which would also have been well suited to use as beads. Dove shells are generally associated with Conus sp. or Cyclope neritea and occasionally also with other small gastropod shells. C. rustica generally has holes on the dorsal face near the shell aperture (Figure 4(1-12)). Although the distinction between natural and artificial holes is not always possible (d 'Errico, Jardon-Giner, & Soler-Mayor, 1993;Zemour et al., 2017), naturally perforated C. rustica shells could be easily collected, representing excellent, ready-for-use ornaments.
The ornamental use of C. rustica did not originate in the Neolithic. In fact, throughout the Mesolithic during the Early Holocene, C. rustica was very common in many regions from the eastern Adriatic coast in central Croatia (Cristiani, Farbstein, & Miracle, 2014;Cvitkušić, 2017;Komšo & Vukosavljević, 2011) and beyond in the Danube Gorges zone (Borić et al., 2014) and in Greece (Perlès, 2019). It appeared not only in the Trieste Karst and the eastern Alpine area in northern Italy (Bertolini, Cristiani, Modolo, Visentini, & Romandini, 2016;Cristiani, 2013;Dalmeri & Lanzinger, 1997;Franco, 2011) but also in Abruzzo (Colombo & Serradimigni, 2016), Calabria (Martini, 1993), and Sicily (Aranguren & Revedin, 1996;Compagnoni, 1991). Dove shells are also frequent during the same phase in southern France (Taborin, 1974) and in the Pyrenees region (Álvarez Fernández, 2008(Álvarez Fernández, , 2010. C. rustica shells became the favourite ornament of various Mesolithic groups, being preferred to other gastropod species that could have been used as beads. A few other ornamental objects were associated with perforated C. rustica shells, completing the body decoration of the circum-Mediterranean foragers. Findings from Italian sites show that perforated red deer atrophic canines were certainly among the adornment objects most appreciated by the last foragers (Bertolini et al., 2016;Dalmeri & Lanzinger, 1997;Franco, 2011) and beyond (d 'Errico & Vanhaeren, 2002;Newell, Kielman, Constandse-Westermann, van der Sanden, & Van Gijn, 1990;Rigaud, 2013). Although in many localities there seem to have been no apparent contacts between late foragers and the first farmers (Biagi, 2003;Guilaine, 2018;Starnini et al., 2018), the presence of C. rustica shells in Early Neolithic sites may in fact be a legacy of previous body adornment traditions (Guilaine & Manen, 2007;Micheli, 2002;Rigaud, 2011), the origins of which have been lost over time. In this regard, the burial at La Balance-Ilot P in Avignon in France of an adult man abundantly adorned with 158 C. rustica shells and 16 red deer atrophic canines attributed to a late Cardial Ware horizon stands out as an exceptional Neolithic site with regard to the quantity, manufacturing, and arrangement of ornaments it contains (Zemour et al., 2017).
The recent data obtained from the Arene Candide Cave excavations reveal that dove shells may offer indirect evidence of other practices. In fact, C. rustica colonizes the Posidonia oceanica meadow, living among the leaves in the phyllosphere; leaves, rhizomes, and fibrous remains of P. oceanica are usually washed up on coastal beaches during storm surges, together with sand, other sediments, and shells of various sizes (Boudouresque & Meinesz, 1982). Thus, the presence of C. rustica shells in coastal sites may not depend exclusively on human operations to obtain raw material for beads, but rather more on the introduction into caves of beached P. oceanica leaves used as a salt supplement and food for livestock (Micheli et al., in press). The occurrence of other species of tiny marine shells, which were certainly not used for food or ornamental purposes, reinforces this hypothesis.
Ornaments made from the hard parts animalsbones and teeth of wild mammals (hare, deer, wild boar, bear, and fox)attest the contribution of hunting activities to subsistence strategies. Such ornaments may also have linked individuals to the natural world through a metonymic process, connecting the wearer of a perforated animal part with the whole animal's body and its imagery. In fact, this association may have powerful and diversified symbolic meanings if parts of animals are used metonymically as ornaments to associate the wearer with the qualities of the animal (White, 1992). Among these ornaments, the canines of carnivores (mainly dog and fox) and Sus tusks are most often found, while the incisors of domestic herbivores are rare. The presence of a fox canine at Cala Pisana on the island of Lampedusa (Radi, 1972) may indicate the overseas origin of this ornament, suggesting a possible Sicilian or perhaps a North African provenance. Unfortunately, it is not possible to test this hypothesis nor to establish direct parallels with the Tunisian and Libyan coastal area, where Impressed-Cardial Ware sites are unknown. The appearance of pierced dog teeth constitutes material confirmation of the animal's domestication and close relationship with humans. Red deer atrophic canines and their bone imitations (Figure 4(14)) are uncommon but interesting finds, since this characteristic ornament of foragers had a strong symbolic value, emphasizing the bravery of the hunters and their success at hunting. Thus, the presence of perforated shells, atrophic canines, or wild carnivores' teeth could be interpreted as the persistence of previous ornamental traditions that refer symbolically to a natural world not yet domesticated by Neolithic farmers. This occurs in the Gaban group in Trentino (Pedrotti, 1998), and among the Cardial groups of southern France (Barge, 1987;Courtin, 2000).
Manufactured beads document new craft skills closely related to the production of polished and ground stone tools. The raw material used for disc-shaped or cylindrical beads could either be shell or various rocks of local or regional origin: siltstone, limestone, schist, sandstone, onyx or agate, radiolarite, and serpentinite. Steatite may be added to the list; although it is certainly the most interesting case, it was not yet extensively used during the Early Neolithic. It is a variety of talc, soft, and easy to work, which can be found in central-western Liguria, in the northern Apennine range between Emilia and Tuscany, and in some areas of the central hilly zone of the latter region, while in the rest of Italy, outcrops are reported only in northern Calabria and central Sardinia (Micheli, Ferrari, & Mazzieri, 2015). As in the case of perforated dove shells and red deer atrophic canines mentioned earlier, steatite was also utilized before the Neolithic. It was used during various phases of the Palaeolithic in Italy and France to produce both personal ornaments, such as beads and pendants, and female figurines (Alhaique, Bietti, Cristiani, Castiglioni, & Ferro, 2006;Mussi, 1991;Vanhaeren & d'Errico, 2003). The most extensive use of steatite for the production of adornment objects occurred during the 5th millennium cal. BC by the Square Mouthed Pottery groups of western Emilia (Micheli & Mazzieri, 2012;Micheli et al., 2015). It is not yet clear whether the beginning of the use of steatite during the Early Neolithic may be attributed to Tyrrhenian Cardial Ware groups that spread inland and discovered steatite outcrops in hilly and mountainous areas, or rather to Po Plain Neolithic or Incised Lines Ware groups that inhabited the western Emilia or Tuscany territories and were well acquainted with their natural resources (Micheli, 2002).
Disc-shaped stone beads and remains from their manufacture are attested in Impressed Ware contexts only at Coppa Nevigata in Apulia (Puglisi, 1955), Favella della Corte in Calabria (Micheli, 2009), and Le Secche on the isle of Giglio in the Tyrrhenian sea (Brandaglia, 1987), while in northern Italy, they are known at Godiasco-Monte Alfeo in a Vhò site (Simone Zopfi, 2004). In layer 25C of the Arene Candide Cave was found a cylindrical steatite artefact (Starnini & Voytek, 1997) that has two possible interpretations: as the elongated rough-out of a cylindrical bead not yet perforated, or as an elongated rod from which several discoid blanks could have been sliced. Furthermore, working remains of disc-shaped shell bead manufacture is still scanty and sporadically attested only in layer 14 (with graffito pottery) of Santo Tiné's excavations in the same cave (Traversone, 1999). A different picture emerges from Chateauneuf-les-Martigues, Riaux 1, and Fontbrégoua in southern France, where abundant remains of unfinished disc-shaped Cardium shell beads were found, indicating their large-scale production during the middle Cardial Ware phase. Stone beads, on the other hand, are very rare in the Early Neolithic sites of southern France (Barge, 1987;Courtin, 2000;Taborin, 1974). Unfortunately, no data are available from Dalmatian sites of Impressed Ware groups (Müller, 1994), while those from the Ionian area of Greece are still very limited (Ifantidis, 2019). However, the Italian picture suggests that elaborate beads were already part of the ornamental tradition of the first farmers to reach Apulia from the south-east (Micheli, 2002). In this regard, the abundant discshaped shell beads found at Franchthi could be convincing evidence that bead manufacturing was well developed among Early Neolithic groups in Greece before these reached Italy (Miller, 1996;Perlès & Pion, 2020).
Several Early Neolithic groups were involved in spreading the use of stone ring bracelets, and this is also seen to some extent in certain later Middle Neolithic contexts. These objects are well documented in the Po Plain Neolithic groups, in particular in the Fiorano (Figures 5(3) and 8), Vhò ( Figure 5(4)), and Friulian groups, and were not restricted to the Impressed-Cardial Ware complex. In southern France, ring bracelets are attested in middle and late Cardial Ware contexts (Barge, 1987;Courtin & Gutherz, 1976) with a more recent chronology compared to the Italian sites, but whose inhabitants were probably in contact with other local Neolithic groups. On the other hand, along the east coast of the Adriatic stone, ring bracelets are very rare; they are present in only four Danilo sites in central Dalmatia, but have an "Italian" appearance and probably originated from there (Martínez-Sevilla et al., 2021).
Most of the Italian stone rings were made from metamorphic rocks, although other lithotypes were also used. In northern Italy, the metamorphic rocks employed for rings include serpentinites, paragonite schists, and chlorite schists, which belong to the "greenstones" group, of which harder rockssuch as eclogite and jade or jadeititewere also used more rarely. The frequency of different rock types employed for stone ring production varies between Neolithic groups (Martínez-Sevilla et al., 2021): greenstones and other less valuable rocks from Apennine sources in the Fiorano group (Figure 8(2)); a large majority of greenstones in Friulian groups; exclusively greenstones in the Vhò; and limestone or marble and greenstones, both found locally, in Liguria. Such differences could be related to (1) the distance of supply areas from the settlements; (2) the local availability of suitable stones and other less valuable rocks; (3) exchange systems allowing the circulation of valuable raw materials and goods; and (4) differing chronologies of the Neolithic groups (Micheli, 2012b). In this regard, marble or limestone rings that are tall and narrow in section, with evident parallels in southern France and Iberia (Constantin & Vachard, 2004;Courtin & Gutherz, 1976;Martínez Sevilla et al., 2021), are found only in Liguria. They did not spread further east into the northern regions, where flat and wide rings, triangular or drop-shaped in cross-section, were instead very common.
The greenstone supply areas were exclusively located in the western Alps, but other less valuable stone types were also used; these were procured locally or regionally from the Alps and Apennines. Steatite was occasionally employed for ring bracelets in few sites: Palude Brabbia, probably within the Isolino group (Tanda, 1977), Casa Querciolaia, attributed to the Incised Lines Ware groups with Fiorano influences (Iacopini, 2000), Pollera Cave, dated to Square Mouthed Pottery phase 1 (Odetti, 1991), and also further south in the site of Catignano (Zamagni, 2003). Bracelet manufacturing remains, however, are limited to single finds of western or local origin in Emilia Romagna (Figure 8(2)) and Lombardy, with the exception of recent discoveries at the Vhò site of Sergnano, where rough-outs, semi-finished products, and finished bracelets made from stones of probable local origin have been found (Angeli, in press). More significant, on the other hand, are the data collected in some Piedmont sites located close to secondary deposits of greenstones in the plains (Micheli, 2012b(Micheli, , 2018Pessina, 1998;Starnini, D'Amico, Biagi, Ghedini, & Pitti, 2004) or near primary outcrops high in the mountains (Pétrequin et al., 2015a).
Alongside the large number of stone rings, there are also few specimens made of shells in Fiorano, Vhò, and Incised Ware Lines sites; shells of S. gaederopus, Glycymeris, and Charonia lampas were used ( Figure 5). Unlike the stone ring components, the shapes of these in plan and section vary according to the form and the structure of the shells (Micheli, 2006). It is possible that, following Taborin (1974) and Courtin (2000), shell bracelets were the prototypes of the versions in stone that spread at a later time. The chronologies of the oldest shell bracelet found at Torre Sabea ( Figure 5(1)), and of some later limestone specimens from southern France (Courtin & Gutherz, 1976) that realistically reproduce the shell versions, are valid clues that seem to confirm this hypothesis. Bone bracelets are even rarer than those made from shells (Micheli, 2018). Ring or flattened-disc bone specimens are known from the Vhò group at Isorella-Cascina Bocche (Starnini, Ghisotti, Girod, & Nisbet, 2000) and Campo Sera Mattina (Bagolini & Biagi, 1975) and from the Fiorano group at the eponymous site (Bazzanella, 2000) and Lugo di Romagna (Figure 8(3)), from the Incised Lines Ware group at Lattaia and Orso caves (Grifoni, 1967;Grifoni Cremonesi, 1969), and also at the site of Catignano (Zamagni, 2003).
The origin of wearing rings around the wrist or arm has not yet been established in Italy, but the custom is known to have been practiced by various Neolithic groups in France and central Europe, where inhumation burials have been found in which the skeletal remains are directly associated with these bracelets (Bonnardin, 2009;Constantin & Vachard, 2004;Jeunesse, 1995Jeunesse, , 1997Nieszery & Brienl, 1993;Zápotocká, 1984), as recently seen in a tomb at Longueil-Sainte-Marie/Le Barrage in France (Pétrequin et al., 2019).
The real social meaning of such rings is not yet completely clear; they could also have been used as pendants in the case of small specimens, or attached to the body or clothesas recently suggested on the basis of some anthropomorphic figures engraved in Buthiers/La Vallée aux Noirs in France (Pétrequin et al., 2019). In our view, these objects were mainly ornaments, but at the same time they could be considered as multifunctional items used in different ways: bracelets worn around the wrist or arm in many cases, decorations hung from or attached to other ornaments, as well asespecially in the case of the greenstone specimensvaluable goods to be kept or exchanged. There is no irrefutable archaeological evidence of their role as valuable objects, but their widespread diffusion in Italy and beyond underlines their symbolic and material importance for Neolithic peoples. Arm rings evidently acquired great value and a shared transcultural importance as a key costume component of various Neolithic groups that do not appear to have been influenced by the Impressed-Cardial Ware complex.

Conclusion
The ornaments of Impressed-Cardial Ware groups stand out from those of other Early Neolithic groups in Italy, a distinction that probably also extends further west along the Mediterranean coast of southern France. This evidence therefore adds to what we already know from other material culture components of the Impressed-Cardial Ware complex (pottery, flint and obsidian lithic industries, etc.) and demonstrates the existence of a shared cultural identity despite regional variations. This is also confirmed by the wide circulation of finished objects and raw materials along marine routes and the main river courses in the Impressed-Cardial Ware territories. At the same timedespite their differences, asynchronous chronologies, and geographical spacing -Po Plain Neolithic, Incised Lines Ware, and Catignano groups share some common cultural traits that extended along the Italian peninsula, including ring bracelets as an expression of the same body adornment tradition that underlined specific personal identities and reaffirmed individuals' group membership or affiliation. This emerges particularly clearly with regard to the Catignano group, which (with its own specific features) was derived from the early Impressed Ware culture, but used ornaments of evidently northern provenance.
Early Neolithic ornament assemblages are unfortunately scarce in Italy and in general not greatly varied in composition. Furthermore, burials are not much help in the analysis of Neolithic body adornment. The role of ornaments in creating differences and strengthening common cultural traditions between Italian Neolithic communities seems to have been significant, but is still far from being precisely identified. In fact, the real complexity and variety of items of body adornment and their symbolic and social meanings will fully emerge only when well-defined study samples are available and when past peoples, objects and places can be directly related to each other by means of well-preserved funerary contexts.