Skip to content
BY 4.0 license Open Access Published by De Gruyter Open Access December 31, 2019

Homogenous dispersion and interfacial bonding of carbon nanotube reinforced with aluminum matrix composite: A review

  • Hanizam Hashim EMAIL logo , Mohd Shukor Salleh and Mohd Zaidi Omar

Abstract

Recent developments in the field of carbon nanotube (CNT) have attracted attentions on a new development of aluminum matrix composite (AMC). Homogenous dispersion and interfacial bonding of CNT/metal matrix are the two main problems yet to have sound solutions. In general, to ensure uniform dispersion, the overall process can be divided into three steps: preprocessing, mixing and post processing. This paper summarizes previous works on solid and liquid processing techniques which some are more successful than others by looking at the improvement of the composite tensile strengths. On the other hand the interfacial bonding depends on the existance of Al4C3 phase and physical conditions of CNT. Both elements must be controlled for the optimized results. The review presented here would be used as references in the future works to fabricate higher strength CNT/aluminum composites.

References

[1] S. R. Bakshi, D. Lahiri, and A. Agarwal, Int. Mater. Rev., 55 (2010) 41–64.Search in Google Scholar

[2] A. Blanco, Z. Azpilgain, J. Lozares, P. Kapranos, and I. Hurtado, Trans. Nonferrous Met. Soc. China, 20 (2010) 1638–1642.Search in Google Scholar

[3] T. Peng and I. Chang, Powder Technol., 284 (2015) 32–39.Search in Google Scholar

[4] A. D. Moghadam, E. Omrani, P. L. Menezes, and P. K. Rohatgi, Compos. Part B, 77 (2015) 402–420.Search in Google Scholar

[5] K. Ma, E. J. Lavernia, and J. M. Schoenung, Rev. Adv. Mater. Sci., 48 (2017) 11–14.Search in Google Scholar

[6] M. Rahimian, N. Ehsani, N. Parvin, and H. reza Baharvandi, J. Mater. Process. Technol., 209 (2009) 5387–5393.Search in Google Scholar

[7] C. G. Kang and S. W. Youn, J. Mater. Process. Technol., 147 (2004) 10–22.Search in Google Scholar

[8] B. Abbasipour, B. Niroumand, and S. M. Monir Vaghefi, Trans. Nonferrous Met. Soc. China, 20 (2010) 1561–1566.Search in Google Scholar

[9] M. K. Hassanzadeh-Aghdam and M. J. Mahmoodi, Mater. Sci. Eng. A, 701 (2017) 34–44.10.1016/j.msea.2017.06.066Search in Google Scholar

[10] S. E. Shin, Y. J. Ko, and D. H. Bae, Compos. Part B, 106 (2016) 66–73.Search in Google Scholar PubMed

[11] C. A. I. Merino, J. E. L. Sillas, J. M. Meza, and J. M. H. Ramirez, J. Alloys Compd., 707 (2017) 257–263.Search in Google Scholar

[12] M. T. Z. Hassan, A. M. K. Esawi, and S. Metwalli, J. Alloys Compd., 607 (2014) 215–222.Search in Google Scholar

[13] D. Liu, H. V. Atkinson, P. Kapranos, W. Jirattiticharoean, and H. Jones, Mater. Sci. Eng. A, 361 (2003) 213–224.Search in Google Scholar

[14] E. I. Salama, A. Abbas, and A. M. K. Esawi, Compos. Part A, Appl. Sci. Manuf., 99 (2017) 84–93.Search in Google Scholar

[15] A. M. K. Esawi, K. Morsi, A. Sayed, M. Taher, and S. Lanka, Compos. Part A, 42 (2011) 234–243.Search in Google Scholar

[16] B. Guo, M. Song, J. Yi, S. Ni, T. Shen, and Y. Du, Mater. Des., 120 (2017) 56–65.10.1016/j.matdes.2017.01.096Search in Google Scholar

[17] H. Kwon, M. Estili, K. Takagi, T. Miyazaki, and A. Kawasaki, Carbon, 47 (2009) 570–577.10.1016/j.carbon.2008.10.041Search in Google Scholar

[18] J. Hashim, L. Looney, and M. S. J. Hashmi, J. Mater. Process. Technol., 92 (1999) 1–7.10.1016/S0924-0136(99)00118-1Search in Google Scholar

[19] M. T. Sijo and K. R. Jayadevan, Procedia Technol., 24 (2016) 379–385.10.1016/j.protcy.2016.05.052Search in Google Scholar

[20] D. Singla, K. Amulya, and Q. Murtaza, Mater. Today Proc., 2 (2015) 2886–2895.10.1016/j.matpr.2015.07.248Search in Google Scholar

[21] S. Dong, J. Zhou, D. Hui, Y. Wang, and S. Zhang, Compos. Part A, 68 (2015) 356–364.10.1016/j.compositesa.2014.10.018Search in Google Scholar

[22] T. H. Nam, K. Goto, Y. Yamaguchi, E.V.A. Premalal, Y. Shimamura, Y. Inoue, K. Naito and S. Ogihara, Compos. Part A, 76 (2015) 289–298.Search in Google Scholar

[23] X. Liu, J. Li, E. Liu, C. He, C. He and N. Zhao, Mater. Sci. Eng. A, 718 (2018) 182-189.10.1016/j.msea.2018.01.065Search in Google Scholar

[24] S. J. Yoo, S. H. Han, and W. J. Kim, Scr. Mater., 68 (2013) 711–714.10.1016/j.scriptamat.2013.01.013Search in Google Scholar

[25] L. Ceschini, A. Dahle, M. Gupta, A.E.W. Jarfors, S. Jayalakshmi, A. Morri, F. Rotundo, S. Toschi and R.A. Singh, Aluminum and Magnesium Metal Matrix Nanocomposites, Springer Nature Singapore Pte Ltd (2017).10.1007/978-981-10-2681-2Search in Google Scholar

[26] X. Yang, E. Liu, C. Shi, C. Heb, J. Li, N. Zhaoa and K. Kondoh, J. Alloys Compd., 563 (2013) 216–220.10.1016/j.jallcom.2013.02.066Search in Google Scholar PubMed

[27] S. El-Khatib, A.Y. Shash, A.H. Elsayed and A. El-Habak, Rev. Adv. Mater. Sci., 52 (2017) 126-133.Search in Google Scholar

[28] A. B. Elshalakany, T. A. Osman, A. Khattab, B. Azzam, and M. Zaki, J. Nanomater., 2014 (2014) 1-14.10.1155/2014/386370Search in Google Scholar

[29] J. H. Lehman, M. Terrones, E. Mansfield, K. E. Hurst, and V. Meunier, Carbon, 49 (2011) 2581–2602.10.1016/j.carbon.2011.03.028Search in Google Scholar

[30] E. T. Thostenson, Z. Ren, and T.-W. Chou, Compos. Sci. Technol., 61 (2001) 1899–1912.10.1016/S0266-3538(01)00094-XSearch in Google Scholar

[31] V. N. Popov, Mater. Sci. Eng. R, 43 (2004) 61–102.10.1016/j.mser.2003.10.001Search in Google Scholar

[32] J. Stein, B. Lenczowski, E. Anglaret, and N. Frety, Carbon, 7 (2014) 44-52.10.1016/j.carbon.2014.05.001Search in Google Scholar

[33] C. Guiderdoni, E. Pavlenko, V. Turq, A. Weibel, P. Puech, C. Estournes, A. Peigney, W. Bacsa, and C. Laurent, Carbon, 58 (2013) 185–197.10.1016/j.carbon.2013.02.049Search in Google Scholar

[34] K. Varshney, Int. J. Eng. Res. Gen. Sci., 2 (2014) 660–677.Search in Google Scholar

[35] S. Simões, F. Viana, M. Reis and M. Vieira, Metals, 7 (2017) 1-11.10.3390/met7070279Search in Google Scholar

[36] X. Yang, T. Zou, C. Shi, E. Liu, C. He, and N. Zhao, Mater. Sci. Eng. A, 660 (2016) 11–18.10.1016/j.msea.2016.02.062Search in Google Scholar

[37] A. M. K. Esawi, K. Morsi, A. Sayed, A. A. Gawad, and P. Borah, Mater. Sci. Eng. A, 508 (2009) 167–173.10.1016/j.msea.2009.01.002Search in Google Scholar

[38] C. R. Bradbury, J.-K. Gomon, L. Kollo, H. Kwon, and M. Leparoux, J. Alloys Compd., 585 (2014) 362–367.10.1016/j.jallcom.2013.09.142Search in Google Scholar

[39] J. G. Park, D. H. Keum, and Y. H. Lee, Carbon, 95 (2015) 690–698.10.1016/j.carbon.2015.08.112Search in Google Scholar

[40] J. Xiang, L. Xie, S. Meguid, S. Pang, J. Yi, Y. Zhang, and R. Liang, Comput. Mater. Sci., 128 (2017) 359–372.10.1016/j.commatsci.2016.11.032Search in Google Scholar

[41] N. Silvestre, Int. J. Compos. Mater., 3 (2013) 28–44.Search in Google Scholar

[42] J. Y. Lim, S. Il Oh, Y. C. Kim, K. K. Jee, Y. M. Sung, and J. H. Han, Mater. Sci. Eng. A, 556 (2012) 337–342.10.1016/j.msea.2012.06.096Search in Google Scholar

[43] A. Herega, Mater. Sci. Eng. A, 5 (2015) 409–414.Search in Google Scholar

[44] A. Bakr, A. Khattab, T. A. Osman, B. Azzam, and M. Zaki, Minia J. Eng. Tech., 33 (2014) 195-207.Search in Google Scholar

[45] A. Dey and K. M. Pandey, Rev. Adv. Mater. Sci., 44 (2016) 168–181.Search in Google Scholar

[46] B. Chen, K. Kondoh, H. Imai, J. Umeda, and M. Takahashi, Scr. Mater., 113 (2016) 158–162.10.1016/j.scriptamat.2015.11.011Search in Google Scholar

[47] B. Chen, J. Shen, X. Ye, H. Imai, J. Umeda, M. Takahashi and K. Kondoh, Carbon, 114 (2016) 198–208.10.1016/j.carbon.2016.12.013Search in Google Scholar

[48] U. G. Rao SS, J. Material. Sci. Eng., 4 (2015) 1-5.Search in Google Scholar

[49] B. Chen, S. Li, H. Imai, L. Jia, J. Umeda, M. Takahashi and K. Kondoh, Mater. Des., 72 (2015) 1–8.10.1016/j.matdes.2015.02.003Search in Google Scholar

[50] F. Rikhtegar, S. G. Shabestari, and H. Saghafian, J. Alloys Compd., 723 (2017) 633–641.10.1016/j.jallcom.2017.06.222Search in Google Scholar

[51] N.A. Bunakov, D.V Kozlov, V.N. Golovanov, E.S. Klimov, E.E. Grebchuk, M.S. Efimov and B.B. Kostishko, Results Phys., 6 (2016) 231–232.10.1016/j.rinp.2016.04.013Search in Google Scholar

[52] A. M. K. Esawi, K. Morsi, A. Sayed, M. Taher, and S. Lanka, Compos. Sci. Technol., 70 (2010) 2237–2241.10.1016/j.compscitech.2010.05.004Search in Google Scholar

[53] H. J. Choi, S. M. Lee, and D. H. Bae, Wear, 270 (2010) 12–18.10.1016/j.wear.2010.08.024Search in Google Scholar

[54] M. Mansoor and M. Shahid, J. Appl. Res. Technol., 14 (2016) 215–224.10.1016/j.jart.2016.05.002Search in Google Scholar

[55] K. P. So, J.C. Jeong, J.G. Park, H.K. Park, Y.H. Choi, D.H. Noh, D. H. Keum, H.Y. Jeong, C. Biswas, C.H. Hong, and Y.H. Lee, Compos. Sci. Technol., 74 (2013) 6–13.10.1016/j.compscitech.2012.09.014Search in Google Scholar

[56] M. Shayan and B. Niroumand, Mater. Sci. Eng. A, 582 (2013) 262–269.10.1016/j.msea.2013.05.090Search in Google Scholar

[57] G. Yamamoto, K. Shirasu, T. Hashida, T. Takagi, J.W. Suk, J. An, R.D. Piner and R.S. Ruoff, Carbon, 49 (2011) 3709–3716.10.1016/j.carbon.2011.04.022Search in Google Scholar

[58] P.S.S.R. Kumar, D.S.R. Smart, and S.J. Alexis, J. Asian Cer. Soc., 5 (2017) 71–75.10.1016/j.jascer.2017.01.004Search in Google Scholar

[59] S. R. Bakshi, A. K. Keshri, V. Singh, S. Seal, and A. Agarwal, J. Alloys Compd., 481 (2009) 207–213.10.1016/j.jallcom.2009.03.055Search in Google Scholar

[60] C. F. Deng, D. Z. Wang, X. X. Zhang, and A. B. Li, Mater. Sci. Eng. A, 444 (2007) 138–145.10.1016/j.msea.2006.08.057Search in Google Scholar

[61] F. Mokdad, D. L. Chen, Z. Y. Liu, B. L. Xiao, D. R. Ni, and Z. Y. Ma, Carbon, 104 (2016) 64–77.10.1016/j.carbon.2016.03.038Search in Google Scholar

[62] B. Fang, B. Fang, M. Springborg, N. Zhao, C. Shi, C. He, J. Li, and E. Liu, Diam. Relat. Mater., 59 (2015) 1–6.10.1016/j.diamond.2015.08.011Search in Google Scholar

[63] F. Housaer, F. Beclin, M. Touzin, D. Tingaud, A. Legris, and A. Addad, Mater. Charact., 110 (2015) 94–101.10.1016/j.matchar.2015.10.014Search in Google Scholar

[64] H. H. Kim, J. S. S. Babu, and C. G. Kang, Mater. Sci. Eng. A, 573 (2013) 92–99.10.1016/j.msea.2013.02.041Search in Google Scholar

[65] S. R. Bakshi and A. Agarwal, Carbon, 49 (2011) 533–544..10.1016/j.carbon.2010.09.054Search in Google Scholar

[66] T. Laha, S. Kuchibhatla, S. Seal, W. Li, and A. Agarwal, Acta Mater., 55 (2007) 1059–1066.10.1016/j.actamat.2006.09.025Search in Google Scholar

[67] H. Kwon, M. Takamichi, A. Kawasaki, and M. Leparoux, Mater. Chem. Phys.,138 (2013) 787–793.10.1016/j.matchemphys.2012.12.062Search in Google Scholar

[68] J. P. Salvetat, J. M. Bonard, N. H. Thomson, A. J. Kulik, L. Forro, W. Benoit and L. Zuppiroli, Appl. Phys. A, 69 (1999) 255-260.10.1007/s003390050999Search in Google Scholar

[69] W. Zhou, S. Bang, H. Kurita, T. Miyazaki, Y. Fan, and A. Kawasaki, Carbon, 96 (2016) 919–928.10.1016/j.carbon.2015.10.016Search in Google Scholar

[70] I. Srikanth, N. Padmavathi, P. S. R. Prasad, P. Ghosal, R. K. Jain, and C. Subrahmanyam, Bull. Mater. Sci., 39 (2016) 41–46.Search in Google Scholar

Received: 2018-05-10
Accepted: 2018-10-04
Published Online: 2019-12-31

© 2019 Hanizam Hashim et al., published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Downloaded on 28.3.2024 from https://www.degruyter.com/document/doi/10.1515/rams-2019-0035/html
Scroll to top button