Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter August 31, 2015

Design of an impact testing machine for polymer films by the free falling dart procedure

Design einer Aufprallprüfmaschine mittels Fallstiftverfahrens für Polymerfilme
  • Muhammad Musaddique Ali Rafique
From the journal Materials Testing

Abstract

Impact forces have been used to study the behavior of materials for a long time. The aim of the impact testing is to investigate those conditions under which a material will fail in a brittle manner regarding a sudden load. There are three general methods of testing impact resistance of components: falling weight tests, pendulum tests and tumbling impact tests. In the present study, an attempt has been made to establish an impact tester used to carry out impact testing of plastic films by free falling dart method. In this, a box of wood with a hole on its upper side is used on which plastic film is held by clamps and a dart is allowed to fall onto film to note perforation. Then the impact resistance is statistically calculated. Impact resistance is determined by the energy caused by weight to fail 50 % of specimen. Practical results are found to be in good agreement with theory.

Kurzfassung

Aufprallbeanspruchungen werden schon seit geraumer Zeit angewendet, um das Materialverhalten zu untersuchen. Das Ziel der Aufprallprüfung besteht darin, die Bedingungen zu untersuchen, unter denen Werkstoffe unter einer plötzlichen Beanspruchung spröde versagen. Es gibt generell drei Verfahren, um Objekte bezüglich ihrer Schlagfestigkeit zu prüfen: Fallgewichtsversuche, Pendelversuche und Schleuderaufprallversuche. In der diesem Beitrag zugrunde liegenden Studie wurde der Versuch unternommen, eine Aufpralltestanlage zu etablieren, die verwendet werden kann, um Aufprallversuche mit frei fallenden, spitzen Stiften durchzuführen. Hierbei wird eine Holzkiste mit einer Bohrung an der Oberseite verwendet, auf die Plastikfilme mit Spannklauen gehalten werden und auf die ein entsprechender Stift fallen gelassen wird, um die Perforation oder andere Beschädigungen zu ermitteln und daraus statistisch die Schlagfestigkeit zu ermitteln. Die Schlagfestigkeit wird anhand der Energie bestimmt, die aus dem Gewicht resultiert, das die Probe zu 50 % beschädigt. Hierbei zeigen die praktischen Versuchsergebnisse gute Übereinstimmung mit den entsprechenden theoretischen Ergebnissen.


§Correspondence Address, Muhammad Musaddique Ali Rafique, Centro Fisica de Materiales, Euskal Herriko Unibersitatea/Universidad del Pais Vasco (EHU/UPV), Paseo Manuel de Lardizabel 5, 20018, Donostia – San Sebastian, Spain. E-mail:

Muhammad Musaddique Ali Rafique, born 1983, received his BSc in Engineering with honors in Pakistan and participated in the EMMS (45 ECTS) in Germany. He is currently awaiting his MSc degree in the field of nanoscience at the Centro Fisica de Materiales, Euskal Herriko Unibersitatea/Universidad del Pais Vasco in San Sebastian, Spain.


References

1 H. M.Richardson, F. W.Wilson (Eds.): Fundamental of Plastics, McGraw-Hill Book Company, New York, USA (1946)Search in Google Scholar

2 M. L.Berins (Ed.): SPI Plastics Engineering Handbook, 5th Ed., Kulwer Academic Publishers, Norwell, Massachusetts, USA (2002)Search in Google Scholar

3 V.Shah: Handbook of Plastics Testing Technology, John Wiley & Sons, New York, USA (1998)Search in Google Scholar

4 I.Rubin (Ed.): Handbook of Plastic Materials and Technology, John Wiley & Sons, New York, USA (1990)Search in Google Scholar

5 A. M.Chatterjee: Encyclopedia of Polymer Science and Engineering, Vol. 2, 2nd Ed., John Wiley & Sons, New York, USA (1985)Search in Google Scholar

6 ASTM D1709-04 A (ISO 7765-1) and D4272 90 (ISO 7765-2): Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart MethodSearch in Google Scholar

Published Online: 2015-08-31
Published in Print: 2015-09-01

© 2015, Carl Hanser Verlag, München

Downloaded on 29.3.2024 from https://www.degruyter.com/document/doi/10.3139/120.110779/pdf
Scroll to top button