Abstract
Structured materials can be a progressive alternative to commonly used flat sheets. There is an enormous range of possibilities for using structured sheet metals due to their better stability. However, the effective use of these materials as well as their implementation in production requires precise knowledge about specific properties of structured sheet metals. The aim of this work is to obtain new knowledge about stiffness and stability during the deformation of this material. The structured sheet metals were investigated by means of buckling tests. The steel type investigated is a commonly used deep-drawing steel DC04. Six types of structure arrangements were compared to non-structured (flat) specimens as a reference. The influence of the type of structure arrangement as well as the deformation speed on the mechanical properties was investigated.
References
1 S.Mütze: Beurteilung des Einsatzes von Teilstrukturierten Stahlfeinblechen im Kfz-Karrosseriebau zur Gewichtreduzierung, Schriftenreihe der Forschungsvereinigung Automobiltechnik Nr.171, Frankfurt am Main, Germany (2002), pp. 1–12Search in Google Scholar
2 A.Sterzing: Bewertung von Leichtbaupotential und Einsatzfächigkeit wölbstrukturierter Feinbleche, Wiss. Skripte, Zwickau, Germany (2005)Search in Google Scholar
3 M.Hoppe, B.Viehweger: Umformverhalten strukturierter Feinbleche, dissertation.de – Verlag im Internet GmbH, Berlin, Germany (2003)Search in Google Scholar
4 F.Mirtsch, N.Weinert, M.Pech, G.Selinger: Vault structures enabling sustainable products, Proc. of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium (2006), pp. 629–633Search in Google Scholar
5 S.Simon, B.Viehweger: Werkstoffgerechtes Konstruieren und Gestalten mit metallischen Werkstoffen, dissertation.de – Verlag im Internet GmbH, Berlin, Germany (2008)Search in Google Scholar
6 F.Kazak, L.Schleuß, R.Ossenbrink, V.Michailov, S.Weiß: Particularities of testing structured sheet metals in 3-point bending tests, Materials Testing58 (2016), pp. 495–50010.3139/120.110883.Search in Google Scholar
7 S.Bartholome, H.Pasternak: Girders with “honey-comb” structured web-ongoing research, Proc. of the 12th International Scintific Conference VSU, Sofia, Bulgaria (2012) 10.3850/978-981-07-5354-2_C-64-543Search in Google Scholar
8 R. C.Hibbeler: Technische Mechanik 2, Festigkeitslehre, Lehr- und Übungsbuch Mechanik und Festigkeitslehre, Carl Hanser Verlag München, Germany (2013)Search in Google Scholar
9 V.Bolotin: Stability Problems in Fracture Mechanics, Wiley, New York, USA (1996)Search in Google Scholar
© 2019, Carl Hanser Verlag, München