Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter August 18, 2017

ANDREA 2.2 and 2.3 – Advances in modelling of VVER cores

Fortschritte bei der Modellierung von WWER typischen Reaktorkernen in den Versionen 2.2 und 2.3 des Rechenprogramms ANDREA
  • F. Havluj , J. Hejzlar , R. Vocka and J. Vysoudil
From the journal Kerntechnik

Abstract

In 2016 a new version of code ANDREA for core design and reload safety analysis of VVER reactors has been released. The new code version includes several major improvements. The first of them is a seamless incorporation of short time kinetics calculations (without temperature feedback) into the code. This new feature accompanied by the possibility of excore detector signal predictions enables precise interpretation of dynamic measurements of control assembly weight during the reactor startup. Second important enhancement resides in new flexible format of cross section libraries and in new fuel temperature model based on results of TRANSURANUS fuel performance code. The new code version has been thoroughly tested and validated for both VVER440 and VVER-1000 reactors. Furthermore for the new version 2.3 which is to be released shortly we have implemented the possibility of fluent control assemblies’ motion and of non-equidistant axial nodalization schemes in VVER-440 calculations.

Kurzfassung

Im Jahr 2016 wurde eine neue Version des Programms ANDREA zur Berechnung des Kerndesigns und zur Durchführung von Sicherheitsanalysen von WWER Reaktoren freigegeben. Diese neue Codeversion enthält mehrere wesentliche Verbesserungen. Die erste ist eine nahtlose Einbindung von Kurzzeit-Kinetik-Berechnungen (ohne Berücksichtigung von Temperaturrückwirkungen). Dies und das neue Feature, ex-Core-Detektorsignale zu berechnen, ermöglichen eine präzise Interpretation der dynamischen Messungen der Reaktivität der Regelstäbe während des Reaktorstarts. Zweite weitere wichtige Erweiterungen sind das nun flexible Format der Querschnittsbibliotheken und das neue Modell zur Berechnung der Brennstofftemperatur, das auf Ergebnissen des Brennstabcodes TRANSURANUS beruht. Die neue Codeversion wurde für WWER-440 und WWER-1000 Reaktoren sorgfältig verifiziert und validiert. In der neuen Version 2.3, die in Kürze freigegeben werden soll, wurden Modelle zur Berücksichtigung fließender Regelstabbewegungen und nicht-äquidistanter axialer Nodalisierungsschemata in WWER-440-Berechnungen umgesetzt.


* E-mail:

References

1 Chao, Y. A.; Tsoulfanidis, N.: Conformal mapping and hexagonal nodal methods – i: Mathematical foundation. Nuclear Science and Engineering121 (1995) 202209Search in Google Scholar

2 Havluj, F.; Vocka, R.: Quadriga – general and powerfull lattice code calculation framework. In Proceedings ICAPP 2015. San Francisco, USA, 2016 27091622Search in Google Scholar

3 Lawrence, R. D.: Progress in nodal methods for the solution of the neutron diffusion and transport equations. Progress in Nuclear Energy17 (1986) 27130110.1016/0149-1970(86)90034-XSearch in Google Scholar

4 Van Uffelen, P.: Modeling of nuclear fuel behavior. Technical Report Report EUR 22321 EN, European Commission, Publications Office, JRC Publications, 2006Search in Google Scholar

5 Wemple, C.; Gheorghiu, H.; Stamm'ler, R.; Villarino, E.: Recent advances in the helios-2 lattice physics code. Proceedings PHYSOR 2008. Interlaken, Switzerland, 2008 18686702Search in Google Scholar

Received: 2017-02-03
Published Online: 2017-08-18
Published in Print: 2017-09-01

© 2017, Carl Hanser Verlag, München

Downloaded on 9.6.2023 from https://www.degruyter.com/document/doi/10.3139/124.110823/html
Scroll to top button