Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter August 31, 2016

DGM News

From the journal International Journal of Materials Research
https://doi.org/10.3139/146.016074
Published Online: 2016-08-31
Published in Print: 2016-07-14

© 2016, Carl Hanser Verlag, München

From the journal
International Journal of Materials Research
International Journal of Materials Research
Volume 107 Issue 7

Journal and Issue

Articles in the same Issue

Contents
Contents
Original Contributions
Interdiffusion in bcc_B2 Ni–Al–Cu alloys at 1 173 K
Hydrogen storage kinetics of nanocrystalline and amorphous NdMg12-type alloy–Ni composites synthesized by mechanical milling
Phase equilibria in the Au–Bi–Sn ternary system at temperatures of 80, 125, and 150 °C
Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide
Friction and wear of diamond-like carbon film deposited on CoCrMo alloy under different lubrication
Wrought aluminium–magnesium alloys subjected to SPD processing
Relationships between mechanical and tribological properties of Zn-15Al-based ternary and quaternary alloys
Gel-casting of porous alumina ceramics with high mechanical strength
Comparing predictions from constitutive equations and artificial neural network model of compressive behavior in carbon nanotube–aluminum reinforced ZA27 composites
Identification of the effective thermal conductivity of a powdered composite using a genetic algorithm
Short Communications
Boride coating on the surface of WC–Co-based cemented carbide
People
Prof. Dr. Dr. h. c. mult. Günter Petzow on the occasion of his 90th birthday
DGM News
DGM News
Downloaded on 3.6.2023 from https://www.degruyter.com/document/doi/10.3139/146.016074/html
Scroll to top button