Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter May 23, 2013

Professor Dr. phil. Dr. techn. e. h. Hellmut F. Fischmeister

From the journal International Journal of Materials Research
https://doi.org/10.3139/146.071101
Published Online: 2013-05-23
Published in Print: 2007-11-01

© 2007, Carl Hanser Verlag, München

From the journal
International Journal of Materials Research
International Journal of Materials Research
Volume 98 Issue 11

Journal and Issue

Articles in the same Issue

Contents
Contents
Editorial
Professor Dr. phil. Dr. techn. e. h. Hellmut F. Fischmeister
Basic
Compressive deformation of lamellar microstructures – a short review
Influence of external and internal length scale on the flow stress of copper
Spinodal decomposition of cubic Ti1−xAlxN: Comparison between experiments and modeling
Combined ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films
Gold-enhanced oxidation of silicon nanowires
Numerical determination of parameterised failure curves for ductile structural materials
Relaxation of semiconductor nanostructures using molecular dynamics with analytic bond order potentials*
Examination of phase transformations in the system Fe–N–C by means of nitrocarburising reactions and secondary annealing experiments; the α + ∊ two-phase equilibrium
Applied
On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS
Silicon nitride tools for hot rolling of high-alloyed steel and superalloy wires – load analysis and first practical tests
Development of the unloading stiffness during cyclic plastic deformation of a high-strength aluminium alloy in different tempers
Enhanced thermal stability of a cobalt–boron carbide nanocomposite by ion-implantation
Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys
Kinetics of nanoscale structure development during Mg-vapour reduction of tantalum oxide
On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation
Adhesive contact between flat punches with finite edge radius and an elastic half-space
Notifications
DGM News
Downloaded on 29.3.2023 from https://www.degruyter.com/document/doi/10.3139/146.071101/html
Scroll Up Arrow