Accessible Requires Authentication Published by De Gruyter November 30, 2013

Nano hydroxyapatite–polysulfone coating on Ti-6Al-4V substrate by electrospinning

S. Santhosh and S. Balasivanandha Prabu

Abstract

Titanium alloys that are used as implant materials generally fail due to the occurrence of significant localized corrosion by interactions with corrosive body fluid. Implants also undergo loosening and detachment from the bone due to its poor biocompatibility. In this study, nano hydroxyapatite synthesized via a wet chemical method, using calcium oxide obtained from sea shells, was used to prepare a composite coating with polysulfone and was electrospun on to Ti-6Al-4V alloy. The controlling parameters of electrospinning were varied to study the characteristics of the coating followed by bioactivity studies, to ensure the biocompatibility of the coated material.


* Correspondence address, Dr. S. Santhosh, Department of Mechanical Engineering, College of Engineering, Anna University, Chennai – 600 025, Tamil Nadu, India, Tel.: +91-44-22357758, Fax: +91-44-22357744, E-mail:

References

[1] G.E.Park, T.J.Webster: J. Biomed. Nanotechnol.1 (2005) 18. 10.1166/jbn.2005.003 Search in Google Scholar

[2] U. KamachiMudali, T.M.Sridhar, B.Raj: Sadhana28 (2003) 601. 10.1007/BF02706450 Search in Google Scholar

[3] T.J.Webster, C.Ergun, R.H.Doremus, R.W.Siegel, R.Bizios: Biomaterials21 (2000) 1803. 10.1016/S0142-9612(00)00075-2 Search in Google Scholar

[4] V.D.Sergey: Biomaterials31 (2010)1465. PMid: 19969343; 10.1016/j.biomaterials.2009.11.050 Search in Google Scholar

[5] L.L.Hench: J. Am. Ceram. Soc.81 (1998) 1705. 10.1111/j.1151-2916.1998.tb02540.x Search in Google Scholar

[6] W.Suchanek, M.Yashima, M.Kakihana, M.Yoshimura: Biomaterials17 (1996) 1715. 10.1016/0142-9612(96)87652-6 Search in Google Scholar

[7] Y.Cai, R.Tang: J. Mater. Chem.18 (2008) 3775. 10.1039/b805407j Search in Google Scholar

[8] M.P.Ginebra, F.C.M.Driessens, J.A.Planell: Biomaterials25 (2004) 3453. PMid: 15020119; 10.1016/j.biomaterials.2003.10.049 Search in Google Scholar

[9] T.J.Webster, J.Y.Ying (Ed.): Nanostructured materials, Academic Press (2001) 125. Search in Google Scholar

[10] H.G.Pfaff, G.Willmann, R.Pothig, P.Ducheyne, D.Christiansen (Eds.): Bioceramics, Butterworth-Heinemann, London (1993) 421. Search in Google Scholar

[11] G.K.Lim, J.Wang, S.C.Ng, C.H.Chew, L.M.Gan: Biomaterials18 (1997) 1433. 10.1016/S0142-9612(97)00081-1 Search in Google Scholar

[12] P.P.Wang, C.H.Li, H.Y.Gong, X.E.Jiang, H.Q.Wang, K.X.Li: Powder Technol.203 (2010) 315. 10.1016/j.powtec.2010.04.023 Search in Google Scholar

[13] J.Hu, J.J.Russel, B.Ben-Nissan: J. Mater. Sci. Lett.20 (2001) 85. 10.1023/A:1006735319725 Search in Google Scholar

[14] K.S.Vecchio, X.Zhang, B.M.Jennifer, M.Wang, W.K.Choll: Acta Biomaterialia3 (2007) 785. PMid: 17512809; 10.1016/j.actbio.2007.03.009 Search in Google Scholar

[15] A.F.Lemos, J.H.G.Rocha, S.S.F.Quaresma, S.Kannan, F.N.Oktar, S.Agathopoulos: J. Eur. Ceram. Soc.26 (2006) 3639. 10.1016/j.jeurceramsoc.2005.12.011 Search in Google Scholar

[16] H.Ivankovic, G. GallegoFerrer, E.Tkalcec, S.Orlic, M.Ivankovic: J. Mater. Sci: Mater Med.20 (2009) 1039. PMid: 19132509; 10.1007/s10854-009-9927-y Search in Google Scholar

[17] MinWang: Biomaterials24 (2003) 2133. 10.1016/S0142-9612(02)00434-9 Search in Google Scholar

[18] M.I.Shtilman: Polymer Science Series A52 (2010) 884. 10.1134/S0965545X10090038 Search in Google Scholar

[19] Z.M.Huang, Y.Z.Zhang, M.Kotaki, S.Ramakrishna: Compos. Sci. Technol.63 (2003) 2223. 10.1016/S0266-3538(02)00220-8 Search in Google Scholar

[20] D.H.Reneker, A.L.Yarin: Polymer49 (2008) 2387. 10.1016/j.polymer.2008.02.002 Search in Google Scholar

[21] C.J.Luo, M.Nangrejo, M.Edirisinghe: Polymer51 (2010) 1654. 10.1016/j.polymer.2009.11.024 Search in Google Scholar

[22] E.J.Chong, T.T.Phan, I.J.Lim, Y.Z.Zhang, B.H.Bay, S.Ramakrishna: Acta Mater.3 (2007) 321. Search in Google Scholar

[23] S.Ramakrishna, K.Fujihara, W.E.Teo, T.Yong, Z.Ma, R.Ramaseshan: Materials Today9 (2006) 40. 10.1016/S1369-7021(06)71389-X Search in Google Scholar

[24] J.M.Cao, J.Feng, S.G.Deng, X.Chang, J.Wang, J.S.Liu: J. Mater. Sci.40 (2005) 6311. 10.1007/s10853-005-4221-8 Search in Google Scholar

[25] Y.Fang, D.K.Agrawal, D.M.Roy, R.Roy: J. Mater. Res.9 (1994) 180. 10.1557/JMR.1994.0180 Search in Google Scholar

[26] T.Kokubo, H.Kushitani, S.Sakka, T.Kitsugi, T.Yamamuro: J. Biomed. Mater. Res.24 (1990) 721. PMid: 2361964; 10.1002/jbm.820240306 Search in Google Scholar

[27] J.Langford, A.Wilson: J. Appl. Crystallogr.11 (1978) 102. 10.1107/S0021889878012844 Search in Google Scholar

[28] A.Chanda, S.Dasgupta, S.Bose, A.Bandyopadhyay: Mater. Sci. Eng. C29 (2009) 1144. 10.1016/j.msec.2008.09.008 Search in Google Scholar

[29] E.J.Mittemeijer, U.Welzel: Modern Diffraction Methods, John Wiley & Sons (2013). PMid: 23600364 Search in Google Scholar

[30] A.J.Ruys, M.Wei, C.C.Sorrell, M.R.Dickson, A.Brandwood, B.K.Milthome: Biomaterials15 (1995) 409. 10.1016/0142-9612(95)98859-C Search in Google Scholar

[31] N. RameshBabu, K. PrasadRao, T.S. SampathKumar: J. Mater. Sci.40 (2005) 6319. 10.1007/s10853-005-2957-9 Search in Google Scholar

[32] A.Rapacz-Kmita, A.Elósarczyk, Z.C.Paszkiewicz, C.Paluszkiewicz: J. Mol. Struct.704 (2004) 65. 10.1016/j.molstruc.2004.02.047 Search in Google Scholar

[33] X.Y.Yuan, Y.Y.Zhang, C.H.Dong, J.Sheng: Polym. Int.53 (2004) 1704. 10.1002/pi.1122 Search in Google Scholar

[34] L.Wannatong, A.Sirivat, P.Supaphol: Polym. Int.53 (2004) 1851. 10.1002/pi.1599 Search in Google Scholar

[35] M.M.Demir, I.Yilgor, E.Yilgor, B.Erman: Polymer43 (2002) 3303. 10.1016/S0032-3861(02)00136-2 Search in Google Scholar

[36] S.Sukigara, M.Gandhi, J.Ayutsede, M.Micklus, F.Ko: Polymer44 (2003) 5721. 10.1016/S0032-3861(03)00532-9 Search in Google Scholar

[37] S.Santhosh, S. BalasivanandhaPrabu, P.Sureshkumar: Adv. Sci. Eng. Med.4 (2012) 421. 10.1166/asem.2012.1196 Search in Google Scholar

[38] K.H.Chang, H.L.Lin: J. Polym. Res.16 (2009) 611. 10.1007/s10965-008-9266-3 Search in Google Scholar

[39] C.S.Ki, D.H.Baek, K.D.Gang, K.H.Lee, I.C.Um, Y.H.Park: Polymer46 (2005) 5094. 10.1016/j.polymer.2005.04.040 Search in Google Scholar

[40] A.K.Haghi, M.Akbari: Phys. Status. Solidi.204 (2007) 1830. 10.1002/pssa.200675301 Search in Google Scholar

[41] C.L.Pai, M.C.Boyce, G.C.Rutledge: Macromolecules42 (2009) 2102. 10.1021/ma802529h Search in Google Scholar

[42] S.Yu, K.P.Hariram, R.Kumar, P.Cheang, K.K.Aik: Biomaterials26 (2005) 2343. PMid: 15585237; 10.1016/j.biomaterials.2004.05.012 Search in Google Scholar

Received: 2012-10-17
Accepted: 2013-6-25
Published Online: 2013-11-30
Published in Print: 2013-12-12

© 2013, Carl Hanser Verlag, München