Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter January 7, 2015

A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials

Hauke Springer, Cem Tasan and Dierk Raabe

Abstract

We introduce a new thermo-mechanical approach for producing layered bulk samples built-up from the constituent phases of structural materials for the analysis of multiphase co-deformation phenomena. Following a thermo-mechanically controlled roll-bonding procedure, the intrinsic properties of the microstructural components as well as their mutual mechanical interaction and interfacial phenomena can be systematically investigated in highly controlled model microstructures of reduced complexity. The effectiveness of the approach is demonstrated on two examples where austenite or martensite layers, respectively, are introduced in a bulk ferritic matrix, representing in either case components of high strength steels. Special emphasis is laid on how the plasticity of martensite within ferrite, as a key parameter required for understanding and optimising dual phase steels, can be investigated following the proposed approach.


* Correspondence address, Dr. Hauke Springer, Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany. Tel.: +49 211 6792 796, Fax: +49 211 6792 333, E-mail:

References

[1] H.K.D.H.Bhadeshia, R.Honeycombe: Steels, Microstructure and Properties, 3rd Ed.Elsevier, Oxford, UK (2006).Search in Google Scholar

[2] H.Berns, W.Theisen: Eisenwerkstoffe Stahl und Gusseisen, Springer VerlagBerlin, Heidelberg (2006).Search in Google Scholar

[3] M.F.Ashby: Materials Selection in Mechanical Design, Butterworth-Heinemann, Burlington, MA, USA (2005).Search in Google Scholar

[4] M.Calcagnotto, D.Ponge, D.Raabe: Mater. Sci. Eng. A527 (2010) 78327840. 10.1016/j.msea.2010.01.004Search in Google Scholar

[5] D.Raabe, D.Ponge, O.Dmitrieva, B.Sander: Scr. Mater.60 (2009) 11411144. 10.1016/j.scriptamat.2009.02.062Search in Google Scholar

[6] C.Herrera, D.Ponge, D.Raabe: Acta Mater.59 (2011) 46534664. 10.1016/j.actamat.2011.04.011Search in Google Scholar

[7] O.Bouaziza, S.Allaina, C.P.Scotta, P.Cugya, D.Barbier: Curr. Opin. Solid State Mater. Sci.15 (2011) 141168. 10.1016/j.cossms.2011.04.002Search in Google Scholar

[8] G.Frommeyer, U.Brüx: Steel Res. Int.77 (2006) 627633.10.1002/srin.200606440Search in Google Scholar

[9] U.Dilthey, L.Stein: Sci. Technol. Weld. Joining11 (2006) 135. 10.1179/174329306X85967Search in Google Scholar

[10] J.Speer, D.K.Matlock, B.CDe Cooman, J.G.Schroth: Acta Mater.51 (2003) 26112622. 10.1016/S1359-6454(03)00059-4Search in Google Scholar

[11] J.G.Speer, D.V.Edmonds, F.C.Rizzo, D.K.Matlock: Curr. Opin. Solid State Mater. Sci.8 (2004) 219237. 10.1016/j.cossms.2004.09.003Search in Google Scholar

[12] G.Gottstein: Physical Foundations of Materials Science. Springer VerlagBerlin (2004). 10.1007/978-3-662-09291-0Search in Google Scholar

[13] N.J.Kim, G.Thomas: Met. Trans. A12 (1981) 483. 10.1007/BF02643691Search in Google Scholar

[14] M.Calcagnotto, D.Ponge, E.Demir, D.Raabe: Mater. Sci. Eng. A527 (2010) 27382746. 10.1016/j.msea.2010.01.004Search in Google Scholar

[15] H.Springer, M.Belde, D.Raabe: Mater. Sci. Eng. A582 (2013) 235244. 10.1016/j.msea.2013.06.036Search in Google Scholar

[16] L.Yuan, D.Ponge, J.Wittig, P.Choi, J.A.Jiménez, D.Raabe: Acta Mater.60 (2012) 27902804. 10.1016/j.actamat.2011.11.042Search in Google Scholar

[17] J.R.Greer, J.Y.Kim, M.J.Burke: JOM 6112 (2009) 1925. 10.1007/s11837-009-0174-8Search in Google Scholar

[18] O.Kraft, C.A.Volkert: Adv. Eng. Mater.3 (2001) 99110. 10.1002/1527-2648(200103)3:3<99::AID-ADEM99>3.0.CO;2-2Search in Google Scholar

[19] C.C.Tasan, J.P.M.Hoefnagels, M.G.D.Geers: Scr. Mater.63 (2010) 835838. 10.1016/j.scriptamat.2010.02.014Search in Google Scholar

[20] D.R.Lesuer, C.K.Syn, O.D.Sherby, J.Wadsworth, J.J.Lewandowski, W.H.HuntJr.: Int. Mater. Rev.41 (1996) 5, 169. 10.1179/imr.1996.41.5.169Search in Google Scholar

[21] D.Embury, O.Bouaziz: Annu. Rev. Mater. Res.40 (2010) 213. 10.1146/annurev-matsci-070909-104438Search in Google Scholar

[22] N.A.Mara, D.Bhattacharyya, P.Dickerson, R.G.Hoagland, A.Misra: Appl. Phys. Lett.92 (2008) 231901. 10.1063/1.2938921Search in Google Scholar

[23] J.Emmerlich, D.Music, M.Braun, P.Fayek, F.Munnik, J.M.Schneider: J. Phys. D: Appl. Phys.42 (2009) 6. 10.1088/0022-3727/42/18/185406Search in Google Scholar

[24] S.Chatterjee, T.K.Pal: Wear255 (2003) 417425. 10.1016/S0043-1648(03)00101-7Search in Google Scholar

[25] M.F.Buchely, J.C.Gutierrez, L.M.Léon, A.Toro: Wear259 (2005) 52. 10.1016/j.wear.2005.03.002Search in Google Scholar

[26] D.S.Gnanamuthu: Opt. Eng.19 (1980) 783. 10.1117/12.7972604Search in Google Scholar

[27] X.Zhang, N.Hansen, Y.Gao, X.Huang: Acta Mater.60 (2012) 59335943. 10.1016/j.actamat.2011.09.008Search in Google Scholar

[28] I.J.Beyerlein, N.A.Mara, J.Wang, J.S.Carpenter, S.J.Zheng, W.Z.Han, R.F.Zhang, K.Kang, T.Nizolek, T.M.Pollock: JOM64 (2012) 10. 10.1007/s11837-012-0431-0Search in Google Scholar

[29] S.Zheng, I.Beyerlein, J.S.Carpenter, K.Kang, J.Wang, W.Han, N.A.Mara: Nature Com.4 (2013) 1969.10.1038/ncomms2969Search in Google Scholar

[30] S.Roy, B.R.Nataraj, S.Suwas, S.Kumar, K.Chattopadhyay: Mater. Des.36 (2012) 529. 10.1016/j.matdes.2011.11.015Search in Google Scholar

[31] N.Tsuji, Y.Saito, Y.Minamino: Scr. Mater.47 (2002) 893. 10.1016/S1359-6462(02)00088-XSearch in Google Scholar

[32] L.Li, K.Nagai, F.Yin: Sci. Technol. Adv. Mater.9 (2008) 11. 10.1088/1468-6996/9/2/023001Search in Google Scholar

[33] S.Nambu, M.Michiuchi, J.Inoue, T.Koseki: Comp. Sci. Technol.69 (2009) 1936. 10.1016/j.compscitech.2009.04.013Search in Google Scholar

[34] M.J.Rathod, M.Kutsuna: Weld. Res.16 (2004) 26.Search in Google Scholar

[35] F.H.Milanez, M.B.H.Mantelli: Int. J. Heat Mass Transfer46 (2003) 4573. 10.1016/S0017-9310(03)00294-1Search in Google Scholar

[36] J.Inoue, S.Nambu, Y.Ishimoto, T.Koseki: Scr. Mater.59 (2008) 1055. 10.1016/j.scriptamat.2008.07.020Search in Google Scholar

[37] S.Nambu, M.Michiuchi, Y.Ishimoto, K.Asakura, J.Inoue, T.Koseki: Scr. Mater.60 (2009) 221. 10.1016/j.scriptamat.2008.10.007Search in Google Scholar

[38] T.A.Wynna, D. BhattacharyyaeMisra, N.A.Mara: Mater. Sci. Eng. A564 (2013) 213. 10.1016/j.msea.2012.11.114Search in Google Scholar

[39] M.Eizadjou, H. DaneshManesh, K.Janghorban: Mater. Des.29 (2008) 909. 10.1016/j.matdes.2007.03.020Search in Google Scholar

[40] L.S.Darken: Trans. AIME, TP2443, Metals Technology (1948) 430.Search in Google Scholar

[41] R.Bernst, G.Inden, A.Schneider: Calphad.32 (2008) 207. 10.1016/j.calphad.2008.02.002Search in Google Scholar

[42] Y.Hayakawa, J.A.Szpunars: Acta Mater.45 (1997) 11, 4713. 10.1016/S1359-6454(96)00251-0Search in Google Scholar

[43] Z.Xia, Y.Kang, Q.Wang: J. Magn. Mater.320 (2008) 3229. 10.1016/j.jmmm.2007.06.010Search in Google Scholar

[44] H.Springer, D.Raabe: Acta Mater.60 (2012) 4950. 10.1016/j.actamat.2012.05.017Search in Google Scholar

[45] R.Jamaati, M.R.Toroghinejad: Mater. Des.31 (2010) 4816. 10.1016/j.matdes.2010.04.022Search in Google Scholar

[46] O.M.Abdelhadi, L.Ladani, J.Razmi: Mech. Mater.43 (2011) 885. 10.1016/j.mechmat.2011.09.006Search in Google Scholar

[47] A.Tasdemirci, I.W.Hall: Mater. Des.30 (2009) 1533. 10.1016/j.matdes.2008.07.054Search in Google Scholar

[48] J.Yanagimoto, T.Oya, S.Kawanishi, N.Tiesler, T.Koseki: CIRP Annals – Manufact. Technol.59 (2010) 287. 10.1016/j.cirp.2010.03.109Search in Google Scholar

[49] C.W.Lee, J.H.Han, J.Yoon, M.C.Shin, S.I.Kwun: Surf. Coat. Technol.204 (2010) 22232229. 10.1016/j.surfcoat.2009.12.014Search in Google Scholar

[50] M.Göken, H.W.Höppel: Adv. Mater.23 (2011) 2663. 10.1002/adma.201100407Search in Google Scholar

[51] Y.Liu, D.Bufford, H.Wang, C.Sun, X.Zhang: Acta Mater.59 (2011) 1924. 10.1016/j.actamat.2010.10.052Search in Google Scholar

[52] B.Ham, X.Zhang: Mater. Sci. Eng. A528 (2011) 2028. 10.1016/j.msea.2010.10.101Search in Google Scholar

[53] J.D.Embury, R.M.Fisher: Acta Metall.14 (1966) 147. 10.1016/0001-6160(66)90296-3Search in Google Scholar

[54] D.Raabe, P.P.Choi, Y.J.Li, A.Kostka, X.Sauvage, F.Lecouturier, K.Hono, R.Kirchheim, R.Pippan, D.Embury: MRS Bull.35 (2010) 982. 10.1557/mrs2010.703Search in Google Scholar

[55] Y.J.Li, P.P.Choi, C.Borchers, S.Westerkamp, S.Goto, D.Raabe, R.Kirchheim: Acta Mater.59 (2011) 3965. 10.1016/j.actamat.2010.08.015Search in Google Scholar

[56] C.Jeonga, T.Oyab, J.Yanagimoto: J. Mater. Process. Technol.213 (2013) 614. 10.1016/j.jmatprotec.2012.10.017Search in Google Scholar

Received: 2014-05-12
Accepted: 2014-08-15
Published Online: 2015-01-07
Published in Print: 2015-01-09

© 2015, Carl Hanser Verlag, München