Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter January 11, 2016

A new constitutive approach to large strain plastic deformation

  • Andrzej Korbel , Włodzimierz Bochniak , Pawel Ostachowski , Anna Paliborek , Marek Łagoda and Adelajda Brzostowicz

Abstract

This paper presents the results of studies regarding the effect of nonconventional plastic deformation on the mechanism of plastic flow of metals. The applied method, called KOBO extrusion, in which monotonic large deformation is accompanied by cyclic reversible plastic twisting, falls into the category of severe plastic deformation. The cyclic reversible plastic twisting, which proved to be redundant in terms of changes in the material's geometry, appears to be a particularly efficient source of point defects. The experimentally proven Newtonian viscosity of metals at low temperatures under KOBO extrusion conditions implies that it is necessary to conduct a study on the crystal plasticity from the point of view of the constitutive law in which a crystal's viscosity totally controls the kinetics of the process. The well known dependency of the viscosity parameter on the diffusion coefficient, which, in turn, is a function of point defect concentration, dictates the link between the frequency of reversible plastic twist and the crystal's viscosity and, consequently, determines the mode of plastic flow. The results of this work provide experimental verification which justifies this new approach to crystal plasticity.


*Correspondence address, Dr. Pawel Ostachowski, AGH – University of Science and Technology, Faculty of Non–Ferrous Metals, A. Mickiewicza Av. 30, 30–059 Cracow, Poland. Tel.: +48126172652, Fax: +48126325615, E-mail:

References

[1] A.Korbel, W.Bochniak: European Patent No0711210, U.S. Patent No573959.Search in Google Scholar

[2] W.Bochniak, A.Korbel: Mater. Sci. Technol.16 (2000) 664. 10.1179/026708300101508243Search in Google Scholar

[3] A.Korbel, W.Bochniak, P.Ostachowski, L.Błaż: Metall. Mater. Trans. A42 (2011) 2881. 10.1007/s11661-011-0688-xSearch in Google Scholar

[4] A.Korbel, W.Bochniak: Philos. Mag.93 (2013) 1883. 10.1080/14786435.2013.765977Search in Google Scholar

[5] A.H.Cottrell: The Mechanical Properties of Matter, John Wiley and Sons, New York (1964).Search in Google Scholar

[6] P.Erhart, P.Jung, H.Schultz, H.Ullmaier: Atomic Defects in Metals, Landolt–BörnsteinBerlin, Heidelberg, New York, London, Paris (1991).Search in Google Scholar

[7] D.Terentyev, L.Malerba: J. Nucl. Mater.329 – 333 (2004) 1161. 10.1016/j.jnucmat.2004.04.269Search in Google Scholar

[8] P.Ostachowski: PhD thesis, Analysis of plastic deformation mechanisms in extrusion process of metals with cyclic deformation path change, AGH – University of Science and Technology, Cracow, Poland (2014).Search in Google Scholar

[9] K.Laue, H.Stenger, A.F.Castle, G.Gernot: Extrusion, Processes, Machinery, Tooling, ASM International, Materials Park, Ohio (1976).Search in Google Scholar

[10] P.K.Saha: Aluminium Extrusion Technology, ASM International, Materials Park, Ohio (2000).10.31399/asm.tb.aet.9781627083362Search in Google Scholar

[11] Z.S.Basinski, A.S.Korbel, S.J.Basinski: Acta Metall.28 (1980) 191. 10.1016/0001-6160(80)90068-1Search in Google Scholar

[12] A.Korbel, J.Pospiech, W.Bochniak, A.Tarasek, P.Ostachowski, J.Bonarski: Int. J. Mater. Res.102 (2011) 464. 10.3139/146.110490Search in Google Scholar

[13] A.Gusak, M.Danielewski, A.Korbel, W.Bochniak, N.Storozhuk: J. Appl. Phys.115 (2014) 0349051. 10.1063/1.4861870Search in Google Scholar

[14] B.B.Straumal, B.Baretzky, A.A.Mazilkin, F.Phillipp, O.A.Kogtenkova, M.N.Volkov, R.Z.Valiev: Acta Mater.52 (2004) 4469. 10.1016/j.actamat.2004.06.006Search in Google Scholar

[15] B.B.Straumal, S.G.Protasova, A.A.Mazilkin, E.Rabkin, D.Goll, G.Schutz, B.Baretzky, R.Z.Valiev: J. Mater. Sci.47 (2012) 360. 10.1007/s10853-011-5805-0Search in Google Scholar

[16] A.Korbel, W.Bochniak, J.Borowski, L.Błaż, P.Ostachowski, M.Łagoda: J. Mater. Proc. Technol.216 (2015) 160. 10.1016/j.jmatprotec.2014.09.008Search in Google Scholar

Received: 2015-02-01
Accepted: 2015-09-03
Published Online: 2016-01-11
Published in Print: 2016-01-08

© 2016, Carl Hanser Verlag, München

Downloaded on 29.3.2024 from https://www.degruyter.com/document/doi/10.3139/146.111311/pdf
Scroll to top button