Abstract
The oxidation behavior of porous Ni-16Cr-9Al alloys at 800 and 1 000 °C was studied using the isothermal temperature oxidation method. The differences in surface morphology, phase and pore structure between oxidized and non-oxidized materials were characterized by means of scanning electron microscopy, X-ray diffraction analysis and mercury intrusion porosimetry. The results revealed that the oxidation rate of the samples which were oxidized for 420 h at 800 °C was 0.012%2 h−1 and the oxidation products were Al2O3 and Cr2O3. The oxidation rate of the samples which were oxidized for 390 h at 1 000 °C was 0.415%2 h−1 and the oxidation products were Al2O3, Cr2O3 and Ni(Cr, Al)2O4. All the oxidation kinetics curves obeyed the parabolic law, exhibiting excellent high temperature oxidation resistance.
References
[1] S.H.Choi, S.Y.Kim, J.Y.Yun, Y.M.Kong, B.K.Kim, K.A.Lee: Met. Mater. Int.17 (2011) 301. 10.1007/s12540-011-0418-3Search in Google Scholar
[2] R.R.Unocic, G.B.Viswanathan, P.M.Sarosi, S.Karthikeyan, J.Li, M.J.Mills, Mater. Sci. Eng., A. 483 (2008) 25. 10.1016/j.msea.2006.08.148Search in Google Scholar
[3] B.Jankovic, B. Adnadevic, S.Mentus, Thermochim: Acta Mater.456 (2007) 48. 10.1016/j.tca.2007.01.033Search in Google Scholar
[4] L.Kloc, J.Fiala, J.Cadek: Mater. Sci. Eng.A 202 (1995) 11. 10.1016/0921-5093(95)09813-5Search in Google Scholar
[5] H.S.Lee, J.S.Jung, K.B.Yoo, E.H.Kim: J. Met. Mater.48 (2010) 277. 10.3365/kjmm.2010.48.04.277Search in Google Scholar
[6] D.A.Akinlade, W.F.Caley, N.L.Richards, M.C.Chaturvedi: Mater. Sci. Eng.A 488 (2008) 221. 10.1016/j.msea.2007.11.019Search in Google Scholar
[7] H.Choe, D.C.Dunand: Mater. Sci. Eng.A 384 (2004) 184. 10.1016/j.msea.2004.06.045Search in Google Scholar
[8] A.Ul–Hamid: Corros. Sci.46 (2004) 27. 10.1016/S0010-938X(03)00100-8Search in Google Scholar
[9] J.S.Oh, M.C.Shim, M.H.Park, K.A.Lee: Met. Mater. Int.20 (2014) 915. 10.1007/s12540-014-5017-7Search in Google Scholar
[10] G.J.Davies, S.Zhen: J. Mater. Sci.18 (1983) 1899. 10.1007/bf00554981Search in Google Scholar
[11] J.Banhart: Mater. Sci.46 (2001) 559. 10.1016/s0921-5093(02)00582-8Search in Google Scholar
[12] S.K.Mukherjee, G.S.Upadhyaya: Oxid. Met.23 (1985) 177. 10.1007/bf00659902Search in Google Scholar
[13] A.Bautista, C.Moral, F.Velasco, C.Simal, S.Guzmán: J. Mater. Process. Technol.189 (2007) 344. 10.1016/j.jmatprotec.2007.02.005Search in Google Scholar
[14] A.Bautista, F.Velasco, M.Campos, M.E.Rabanal, J.M.Torralba: Oxid. Met.59 (2003) 373. 10.1023/a:1023000329514Search in Google Scholar
[15] A.Bautista, F.Velasco, J.Abenojar: Corros. Sci.45 (2003) 1343. 10.1016/s0010-938x(02)00217-2Search in Google Scholar
[16] Z.Zheng, Y.Jiang, H.X.Dong, L.M.Tang, Y.H.He, B.Y.Huang: Trans. Nonferrous Met. Soc. China.19 (2009) 581. 10.1016/s1003-6326(08)60316-7Search in Google Scholar
[17] V.K.Sikka, S.C.Deevi, S.Viswanathan, R.W.Swindeman, M.L.Santella: Intermetallics.8 (2000) 1329. 10.1016/s0966-9795(00)00078-9Search in Google Scholar
[18] B.P.Bewlay, J.D.Rigney, R.Didomizio. Oxide-forming protective coatings for niobium-based materials. US Patent: us 8247085 (2012).Search in Google Scholar
[19] G.C.Wood: Oxid. Met.2 (1970) 11. 10.1007/bf00603581Search in Google Scholar
[20] H.P.Tang, Y.Wang, Y.Liu, W.J.Li, C.Han: Journal of Central South University.20 (2013) 3345. 10.1007/s11771-013-1858-3Search in Google Scholar
[21] H.X.Dong, Y.Jiang, Y.H.He, J.Zou, N.P.Xu, B.Y.Huang, C.T.Liu, P.K.Liaw: Mater. Chem. Phys.122 (2010) 417. 10.1016/j.matchemphys.2010.03.017Search in Google Scholar
[22] S.Taniguchi, T.Shibata: Oxid. Met.28 (1987) 255. 10.1007/BF00656704Search in Google Scholar
[23] Y.C.Pan, T.H.Chuang, Y.D.Yao: J. Mater. Sci.26 (1991) 6097. 10.1007/bf01113890Search in Google Scholar
[24] G.R.Wallwork, A.Z.Hed: Oxid. Met.3 (1971) 171. 10.1007/bf00603485Search in Google Scholar
[25] H.M.Tawancy, N.Sridhar: Oxid. Met.37 (1992) 143. 10.1007/bf00665187Search in Google Scholar
[26] Y.Zhao, G.X.Yang, C.Yuan, J.T.Guo, C.S.Liu: Corrosion Science and Protection Technology.27 (2007) 1. 10.3969/j.issn.1002-6495.2007.01.001Search in Google Scholar
[27] H.P.Tang, Y.Wang, Y.Liu, W.J.Li, C.Han: J. Cent. South Univ.20 (2013) 3345. 10.1007/s11771-013-1858-3Search in Google Scholar
[28] G.J.Cao, L.Geng, Z.Z.Zheng, M.Naka: Intermetallics.15 (2007) 1672. 10.1016/j.intermet.2007.07.003Search in Google Scholar
[29] G.F.Chen, H.Y.Lou: Corros. Rev.18 (2000) 195. 10.1515/CORRREV.2000.18.2-3.195Search in Google Scholar
[30] C.S.Giggins, F.S.Pettit: J. Electrochem. Soc.118 (1971) 1782. 10.1149/1.2407837Search in Google Scholar
[31] C.B.Sun, G.Y.Fu, Q.Liu: Journal of Materials and Metallurgy.3 (2004) 313. 10.14186/j.cnki.1671-6620.2004.04.016Search in Google Scholar
© 2019, Carl Hanser Verlag, München
