Accessible Requires Authentication Published by De Gruyter January 31, 2020

Compressive properties and energy absorption response of cBN added Al composite foams

Bilge Yaman Islak

Abstract

In this study, pure Al foam and 2, 5, 10 wt.% cubic boron nitride Al composite foams were manufactured to reveal the effects of cubic boron nitride addition on the properties of Al foam materials. Cellular morphology investigations and quasi-static compression test results were correlated with the effect of foaming agent behavior, compacting pressure, amount of ceramic addition, and compressive properties. The cubic boron nitride reinforced Al foams exhibited superior compressive properties and energy absorption behavior. The compressive properties were enhanced by increasing the cubic boron nitride content and compacting pressure. The maximum mechanical properties were achieved in 10 wt.% cubic boron nitride aluminum composite foams. The results revealed that these composite foams are possibly a candidate for specific high technology applications with high mechanical properties.


Correspondence address, Assist. Prof. Dr. Bilge Yaman Islak, Eskisehir Osmangazi University, Department of Metallurgical & Materials Engineering, Meselik Campus, TR-26480 Eskisehir, Turkey. Tel.: +90 222 2393750/3686, E-mail:

References

[1] A. Hassani , A.Habibolahzadeh, H.Bafti: Mater. Des.40 (2012) 510. 10.1016/j.matdes.2012.04.024 Search in Google Scholar

[2] S.M. Hosseini , A.Habibolahzadeh, V.Králík, V.Petráňová, J.Němeček: Mater. Sci. Eng.A 680 (2017) 157. 10.1016/j.msea.2016.10.091 Search in Google Scholar

[3] N. Mahmutyazicioglu , O.Albayrak, M.Ipekoglu: J. Mater. Res.28 (2013) 2509. 10.1557/jmr.2013.187 Search in Google Scholar

[4] A. Li , H.Xu, L.Geng, B.Li, Z.Tan, W.Ren: Trans. Non-ferrous Met. Soc. China22 (2012) 33. 10.1016/S1003-6326(12)61680-X Search in Google Scholar

[5] S. Yu , Y.Luo, J.Liu: Mater. Sci. Eng.A 487 (2008) 394. 10.1016/j.msea.2007.11.025 Search in Google Scholar

[6] O. Prakash , H.Sang, J.D.Embury: Mater. Sci. Eng.A 199 (1995) 195. 10.1016/0921-5093(94)09708-9 Search in Google Scholar

[7] M. Alizadeh , M.Mirzaei-Aliabadi: Mater. Des.35 (2012) 419. 10.1016/j.matdes.2011.09.059 Search in Google Scholar

[8] A. Daoud : J Alloys Compd.486 (2009) 597. 10.1016/j.jallcom.2009.07.013 Search in Google Scholar

[9] Y.C. Li , J.Y.Xiong, J.G.Lin, M.Forrest, P.D.Hodgson, C.E.Wen: Mater. Sci. Forum31 (2007) 52. Search in Google Scholar

[10] L. Vel , G.Demazeau, J.Etourneau: Mater. Sci. Eng.B 10 (1991) 149. 10.1016/0921-5107(91)90121-B Search in Google Scholar

[11] S. Elbir , S.Yilmaz, A.K.Toksoy, M.Guden, I.W.Hall: J. Mater. Sci.38 (2003) 4745. 10.1023/A:1027427102837 Search in Google Scholar

[12] H. Bafti , A.Habibolahzadeh: Mater. Des.31 (2010) 4122. 10.1016/j.matdes.2010.04.038 Search in Google Scholar

[13] S.S. Vidyawathi , R.Amaresh, L.N.Satapathy: Bull. Mater. Sci.25 (2002) 569. 10.1007/BF02710553 Search in Google Scholar

[14] I.D. Giovannelli Maizoa , A.P.Luza, C.Pagliosab, V.C.Pandolfelli: Ceram. Int.43 (2017) 10207. 10.1016/j.ceramint.2017.05.047 Search in Google Scholar

[15] E. Gunay : Turkish J. Eng. Env. Sci.35 (2011) 83. 10.3906/muh-1008-14 Search in Google Scholar

[16] ASTM E9–89a(2000), Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature (Withdrawn 2009), ASTM International, West Conshohocken, PA (2000) 200. Search in Google Scholar

[17] W. Deqing , S.Ziyuan: Mater. Sci. Eng.A 361 (2003) 45. 10.1016/S0921-5093(03)00557-4 Search in Google Scholar

[18] M. Malekjafarian , S.K.Sadrnezhaad: Mater. Des.42 (2012) 8. 10.1016/j.matdes.2012.05.036 Search in Google Scholar

[19] H.I. Bakan , D.Heaney, R.M.German: Powder Metall.44 (2001) 235. 10.1179/003258901666392 Search in Google Scholar

[20] H.I. Bakan : Scripta Mater.55 (2006) 203. 10.1016/j.scriptamat.2006.03.039 Search in Google Scholar

[21] J. Qi , W.Chen, H.Wang, Y.Wang, L.Li, H.L.W.Chan: Sensor Actuat A-PHYS116 (2004) 215. 10.1016/S0924-4247(04)00267-5 Search in Google Scholar

[22] J. Cao , C.Li: Int. J. Appl. Ceram. Technol.12 (3) (2015) 652. 10.1111/ijac.12185 Search in Google Scholar

[23] D.P. Mondal , M.D.Goel, S.Das: Mater. Sci. Eng.A 507 (2009) 102. 10.1016/j.msea.2009.01.019 Search in Google Scholar

[24] B. Soni , S.Biswas: Mater. Today2 (2015) 18861891. 10.1016/j.matpr.2015.07.140 Search in Google Scholar

[25] Y.J. Yang , F.S.Han, D.K.Yang, K.Zheng, Mater. Sci. Technol.23 (2007) 502504. 10.1179/174328407X161114 Search in Google Scholar

[26] L.J. Gibson , M.F.Ashby, Cellular Solids, Structure and Properties, 2nd ed., Cambridge University Press, ISBN: 9780521495608 (1997) 510. 10.1017/CBO9781139878326 Search in Google Scholar

[27] A.K. Kaw , Mechanics of Composite Materials, 2nd ed., CRC Press, Boca Raton ISBN: 9780849313431 (1997) 352. Search in Google Scholar

[28] D.P. Papadopoulos , I.C.Konstantinidis, N.Papanastasiou, S.Skolianos, H.Lefakis, D.N.Tsipas: Mater. Lett.58 (2004) 2574. 10.1016/j.matlet.2004.03.004 Search in Google Scholar

[29] J.R. Davis , ASM Specialty Handbook: Tool Materials, ASM International Handbook Committee ISBN: 978-0-87170-545-7 (1995) 501. Search in Google Scholar

Received: 2019-05-16
Accepted: 2019-10-24
Published Online: 2020-01-31
Published in Print: 2020-02-12

© 2020, Carl Hanser Verlag, München