Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter August 5, 2014

Grain Size Measurement in Experimental Co-Re-based Alloys to Study Grain Coarsening

Part II

Korngrößenmessung in Experimentellen Co-Re-Basislegierungen zur Untersuchung des Kornvergröberungsverhaltens
Teil II
A. K. Czerny , D. Mukherji and J. Rösler
From the journal Practical Metallography

Übersetzung: Tilti Systems

Part I appeared in our July issue.

Teil I ist erschienen im Juliheft.

References / Literatur

[1] Miller, S.: Advanced Materials Mean Advanced Engines, Materials World4 (1996), 446449, in Google Scholar

[2] Rösler, J.; Mukherji, D.; BaranskiT.: Co-Re-based Alloys: A New Class of High Temperature Materials?, Adv. Eng. Mater.9 (2007) 876881. DOI: 10.1002/adem.200700132Search in Google Scholar

[3] Mukherji, D.; Rösler, J.; Wehrs, J.; Strunz, P.; Beran, P.; Gilles, R.; Hofmann, M.; Hoelzel, M.; Eckerlebe, H.; Szentmiklósi, L.; Mácsik, Z.: Application of In Situ Neutron and X-Ray Measurements at High Temperatures in the Development of Co-Re-Based Alloys for Gas Turbines, Metall. Mater. Trans.44A (2013) 2230. DOI: 10.1007/s11661-012-1363-6Search in Google Scholar

[4] Paulisch, M.C.; Wanderka, N.; Miehe, G.; Mukherji, D.; Rösler, J.; Banhart, J.: Characterization of Borides in Co–Re–Cr-based High-temperature Alloys, J. Alloys and Compd.569 (2013) 8287. DOI: 10.1016/j.jallcom.2013.03.086Search in Google Scholar

[5] Depka, T.; Somsen, Ch.; Eggeler, G.; Mukherji, D.; Rösler, J.: Sigma Phase Evolution in Co-Re-Cr-based Alloys at 1100 °C, Intermetallics (2014) in press. (Available online 2 December 2013)10.1016/j.intermet.2013.11.003Search in Google Scholar

[6] ASTM Standard E112–12 (2012): Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 2012, DOI: 10.1520/E0112-12, DOI: 10.1520/E0112Search in Google Scholar

[7] Vander Voort, G. F.,: Examination of Some Grain Size Measurement Problems, ASTM STP1165 (1993): Metallography Past, Present and Future (75th Anniversary Volume), Eds. Vander VoortGF, WarmuthFJ, PurdySM, SzirmaeA, ASTM International, West Conshohocken, PA, 1993, pp. 266294, DOI: 10.1520/STP1165-EB, DOI: 10.1520/STP1165-EBSearch in Google Scholar

[8] Adams, B. L.; Wright, S. I.; Kunze, K.: Orientation Imaging: The Emergence of a New Micro­scopy, Metall. Trans.24A (1993) 819831. DOI: 10.1007/BF02656503Search in Google Scholar

[9] Orientation Imaging Microscopy v6, EDAX User Manual (2011): EDAX Inc., Mahwah, NJ, USA, www.edax.comSearch in Google Scholar

[10] Nowell, M. W.; Witt, R. A.; True, B. W.: EBSD Sample Preparation: Techniques, Tips, and Tricks, Microscopy Today13 (2005) 4448.10.1017/S1551929500053669Search in Google Scholar

[11] OriginPro 8.6.0 (2012): OriginLab Corp., Northampton, MA, USA, www.OriginLab.comSearch in Google Scholar

[12] Bölitz, M-C.; Brunner, M.; Völkl, R.; Mukherji, D.; Roesler, J.; Glatzel, U.: Microstructural Study of Boron-doped Co-Re-Cr Alloys by Means of Transmission Electron Microscopy and Electron Energy Loss Spectroscopy, Int. J. Mater. Res.103 (2012) 554558.10.3139/146.110729Search in Google Scholar

[13] Frey, F.; Prandl, W.; Schneider, J.; Zeyens, C.; Ziebecks, K.; The HCP-FCC Transition in Pure Co Investigated by Neutron Scattering, J. Phys. F Met. Phys.9 (1997) 603616. DOI: 10.1088/0305-4608/9/4/007Search in Google Scholar

[14] Binary Alloy Phase Diagrams (1986). Edited by T.B.Massalski, p.793ASM: Ohio.Search in Google Scholar

[15] Tolédano, P.; Krexner, G.; Prem, M.; Weber, H.-P.; Dmitriev, V. P.: Theory of the Martensitic Transformation in Cobalt, Phys. Rev. B64 (2001) 144104–1144104–17.Search in Google Scholar

Received: 2014-05-16
Accepted: 2014-05-19
Published Online: 2014-08-05
Published in Print: 2014-08-14

© 2014, Carl Hanser Verlag, München

Downloaded on 29.1.2023 from
Scroll Up Arrow