Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter August 1, 2018

Serial Sectioning Techniques – a Versatile Method for Three-Dimensional Microstructural Imaging

The working group “Serial Sectioning Tomography” is headed by Prof. Dr.-Ing. Frank Mücklich.

Serienschnitttechniken – Eine vielfältige Methode zur dreidimensionalen Gefügeabbildung
F. Mücklich, M. Engstler, D. Britz and J. Gola
From the journal Practical Metallography

Translation: E. Engert


References / Literatur

[1] Holzer, L. et al.: Journal of Microscopy, 216 (2004), 849510.1111/j.0022-2720.2004.01397.xSearch in Google Scholar

[2] Spowart, J. E.; Mullens, H. E.; Puchala, B. T.: Journal of Microscopy55 (2003) 10, 3537Search in Google Scholar

[3] Echlin, M. P. et al.: Materials Characterization100 (2015), 11210.1016/j.matchar.2014.10.023Search in Google Scholar

[4] Desbois, G. et al.: Journal of Microscopy249 (2013), 215235. 10.1111/jmi.12011Search in Google Scholar

[5] Hashimoto, T. et al.: Ultramicroscopy163 (2006), 61810.1016/j.ultramic.2016.01.005Search in Google Scholar

[6] Efimov, A. E. et al.: Journal of Microscopy226 (2007), 20721710.1111/j.1365-2818.2007.01773.xSearch in Google Scholar

[7] Yio, M. H. N. et al.: Journal of Microscopy258 (2015) 2, 15116910.1111/jmi.12228Search in Google Scholar

[8] Inkson, B. J.; Mulvihill, M.; Möbius, G.: Scripta Materialia, 45 (2001),753–758 10.1016/S1359-6462(01)01090-9Search in Google Scholar

[9] Prill, T. et al: Journal of Microscopy250 (2013), 778710.1111/jmi.12021Search in Google Scholar PubMed

[10] Burnett, T. L. et al.: Ultramicroscopy161 (2016), 11912910.1016/j.ultramic.2015.11.001Search in Google Scholar PubMed

[11] Konrad, J.; Zaefferer, S.; Raabe, D.: Acta Materialia54 (2006), 1369138010.1016/j.actamat.2005.11.015Search in Google Scholar

[12] Lasagni, F. et al.: Advanced Engineering Materials8 (2006), 71972310.1002/adem.200500276Search in Google Scholar

[13] Kruglova, A. et al: Computational Materials Science120 (2016), 9910710.1016/j.commatsci.2016.04.019Search in Google Scholar

[14] DeHoff, R. T.: J. Microsc.131 (1983) 259263. 10.1111/j.1365-2818.1983.tb04254.xSearch in Google Scholar

[15] SpowartJ. E.: Scripta Materialia55 (2006) 1, 510. 10.1016/j.scriptamat.2006.01.019Search in Google Scholar

[16] Adachi, Y. et al.: Matr. Sci. Forum706–709 (2012), 2687269210.4028/www.scientific.net/MSF.706-709.2687Search in Google Scholar

[17] Uchic, M. et al.: Report Preprint AFRL-RX-WP-TP-2012-0254 (2012)Search in Google Scholar

[18] Fujisaki, K. et al.: Journal of Microscopy237 (2010), 899510.1111/j.1365-2818.2009.03306.xSearch in Google Scholar PubMed

[19] Keehan, E. et al.: Materials Characterization59 (2008) 7, 87788210.1016/j.matchar.2007.07.011Search in Google Scholar

[20] Rowenhorst, D. J. et al.: Scripta Materialia55 (2006) 1, 111610.1016/j.scriptamat.2005.12.061Search in Google Scholar

[21] Britz, D. et al.: La Metall. Ital. (2017) 510Search in Google Scholar

[22] Britz, D. et al.: Materials Performance and Characterization5 (2016) 5, 55356310.1520/MPC20160067Search in Google Scholar

[23] Mücklich, F.: Practical Metallography52 (2015), 50752410.3139/147.110360Search in Google Scholar

[24] Roland, M. et al.: Archive of Applied Mechanics85 (2015) 8, 1161117110.1007/s00419-014-0956-5Search in Google Scholar

[25] Britz, D. et al.: Practical Metallography54 (2017), 68569610.3139/147.110484Search in Google Scholar

[26] Azimi, S. M. et al.: Scientific Report8 (2018) 1 10.1038/s41598-017-17765-5Search in Google Scholar PubMed PubMed Central

[27] Gola, J. et al.: Computational Materials Science148 (2018) 32433510.1016/j.commatsci.2018.03.004Search in Google Scholar

[28] Scherff, F. et al.: PAMM16 (2016) 39139210.1002/pamm.201610184Search in Google Scholar

Received: 2018-05-24
Accepted: 2018-05-30
Published Online: 2018-08-01
Published in Print: 2018-08-16

© 2018, Carl Hanser Verlag, München