Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter November 7, 2013

Contents

From the journal International Polymer Processing
https://doi.org/10.3139/217.013052
Published Online: 2013-11-07
Published in Print: 2013-11-01

© 2013, Carl Hanser Verlag, Munich

From the journal
International Polymer Processing
International Polymer Processing
Volume 28 Issue 5

Journal and Issue

Articles in the same Issue

Contents
Contents
Regular Contributed Articles
Use of the Taguchi Method for Optimization of Poly (Butylene Terephthalate) and Poly (Trimethylene Terephthalate) Blends through Injection Molding
CFD Analysis of the Frame Invariance of the Melt Temperature Rise in a Single-screw Extruder
Simulation Study of Thermotropic LCPs and Prediction of Normal Stress Difference at High Shear Rate
Study on Mechanical, Thermal Properties and Morphology of Biodegradable Poly(butylene succinate)/Nano-TiO2 Composites
Preparation and Characterization of Bamboo Fibers Coated with Titanium Urushiol and its Composite Materials with Polypropylene
Effect of the Mandrel Rotation Speed and Inner Wall Cooling Rate on the Performance and Structure of Polypropylene Block-Copolymer Pipe
Modification of Liquid Oxygen Compatibility of Bisphenol F Epoxy Resin
Pressure Variation during Interfacial Instability in the Coextrusion of Low Density Polyethylene Melts
The Effects of Processing Parameters on the Residual Wall Thickness Distribution at the Sharp Angle Corner of Water Assisted Injection Molded Parts
The Influence of Extrusion Conditions on Mechanical and Thermal Properties of Virgin and Recycled PP, HIPS, ABS and Their Ternary Blends
Influence of Mold Temperature on Mold Filling Behavior and Part Properties in Micro Injection Molding
On the Pressure Dependency of the Bagley Correction
PPS News
PPS News
Seikei Kakou Abstracts
Seikei-Kakou Abstracts
Downloaded on 30.5.2023 from https://www.degruyter.com/document/doi/10.3139/217.013052/html
Scroll to top button