Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter June 3, 2013

First in a Series: Polymer Processing in Developing Countries Polymer Processing in Peru

  • Fernando G. Torres
From the journal International Polymer Processing
https://doi.org/10.3139/217.0303
Published Online: 2013-06-03
Published in Print: 2003-09-01

© 2003, Carl Hanser Verlag, Munich

From the journal
International Polymer Processing
International Polymer Processing
Volume 18 Issue 3

Journal and Issue

Articles in the same Issue

Contents
Contents
Editorial
First in a Series: Polymer Processing in Developing Countries Polymer Processing in Peru
Screw Extrusion
Modeling and Analysis of Helicoidal Flow in a Conical Extruder
A Powerful Universal Plasticating System for Single-screw-extruders and Injection-moulding Machines
Cross Channel Flow Velocity and Motion Trajectory of Polymers in a Helical Channel
Mixing and Compounding
Influence of Low Molecular Weight Additives on Die Extrusion Rheometer Flow of Thermoplastic Melts
Design of a Static Temperature Scanning Ultrasonic Measurement System and Application to Multi-phase Polymer Systems
Raman Spectroscopy as an On-line Technique to Monitor Shear Flow Effect on Partially Miscible Polymer Blends
Reactive Extrusion
Flow Effects on Polymer Transesterification
A Dynamic Model Accounting for Oscillating Behavior in Reactive Extrusion
Study on Functionalization of Isotactic PP with Maleic Anhydride in an Internal Mixer and a Twin-screw Extruder
Quality Aspects on the Power Cable Core Insulation Extrusion and Thermal Curing Process
Die Extrusion
Flow Balancing in Extrusion Dies for Thermoplastic Profiles
Flow Balancing in Extrusion Dies for Thermoplastic Profiles
Molding
On the Residual Stress and Shrinkage in Injection Compression Molding
Downloaded on 3.6.2023 from https://www.degruyter.com/document/doi/10.3139/217.0303/html
Scroll to top button