Abstract
By means of systematic measurements of single orientations the microtexture and the orientation relations in the area of partly recrystallized shear bands in deformed (112)[111̅] single crystals of pure copper have been investigated. In the analysis the distribution function of orientations and orientation differences of various kinds were calculated. In the calculations of these orientation characteristics the direct method and also for comparison the commonly used series expansion method were applied. To enable a comparison of the calculated results, both methods require some definite modifications which are explained in the paper. The results of the microtexture analysis are discussed concerning details of the texture changes and the orientation relations between the deformed matrix and the recrystallized grains.
Abstract
In teilrekristallisierten Scherbändern verformter Rein-Kupfer (112)[111̅] Einkristalle wurde die Mikrotextur mit Hilfe systematischer Einzelorientierungsmessungen untersucht. Orientierungs- und Orientierungsdifferenz-Verteilungsfunktionen wurden mit der direkten Methode und im Vergleich dazu mit der Reihenentwicklungsmethode berechnet. Eine definierte Modifikation der beiden Methoden läßt einen direkten Vergleich der Ergebnisse zu. Die Ergebnisse der Mikrotexturuntersuchungen in den Scherbändern werden im Hinblick auf Texturänderung und Orientierungsbeziehungen zwischen verformter Matrix und rekristallisierten Körnern diskutiert.
Literature
1 Adams, B.; Wright, S.I.; Kunze, K.: Metall. Trans. A 24A (1993) 819.10.1007/BF02656503Search in Google Scholar
2 Pospiech, J.; Lücke, K.; Sztwiertnia, K.: Acta metall. mater. 41 (1993) 305.10.1016/0956-7151(93)90361-USearch in Google Scholar
3 Bunge, H.J.: Texture Analysis in Material Science, Butterworths, London (1982).Search in Google Scholar
4 Pospiech, J.: in: H.J. Bunge (ed.), Proc. Intern. Workshop on Theor. Methods in Texture Analysis, DGM Informationsgesellschaft, Oberursel (1986) 95.Search in Google Scholar
5 Pospiech, J.: The Smoothing of the ODF Introduced by Calculation Methods, Texture and Microstructure 26–27 (1996) 83.10.1155/TSM.26-27.83Search in Google Scholar
6 Baudin, T.; Jasieński, Z.; Piątkowski, A.; Pospiech, J.; Penelle, R.: Rev. Mét.− CIT/SMG (1996) in press.Search in Google Scholar
7 Liu, Y.L.; Hsun Hu; Hansen, N.: Acta metall. mater. 43 (1995) 2395.10.1016/0956-7151(94)00424-2Search in Google Scholar
© 1997 Carl Hanser Verlag, München