Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Refiner optimization and control Part I: Fiber residence time and major dynamic fluctuations in TMP refining processes

  • Anders Karlström and Jan Hill
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2014-29-04-p635-652
Keywords: Refining control; Energy efficiency; Fiber distribution; Pulp consistency; Temperature profile
Published Online: 2018-07-19
Published in Print: 2014-12-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 29 Issue 4
Submit manuscript

Journal and Issue

Articles in the same Issue

Pressurized hot water flow-through extraction of birch sawdust – Effects of sawdust density and sawdust size
Analyses of wood components in mild steam explosion liquors from spruce
Modeling of mass transfer and degradation of hemicelluloses in flow-through hot water extraction
On filtration and heat insulation properties of foam formed cellulose based materials
Estimation methods of log loading performance in industrial debarking for the kraft pulping process
The influence of magnesium oxide charge on kappa number after oxygen delignification of softwood acid sulfite pulp
Effect of sodium ion concentration profile during softwood kraft pulping on delignification rate, xylan retention and reactions of hexenuronic acids
Washing, bleaching and characterization of eucalyptus pulp from ethanol pulping
Evaluation of future pulp mill concepts – Reference model of a modern Nordic kraft pulp mill
Refiner optimization and control Part I: Fiber residence time and major dynamic fluctuations in TMP refining processes
Refiner optimization and control Part II: Test procedures for describing dynamics in TMP refining processes
Flow cytometry as a tool to assess inhibitor performance for calcium oxalate scale control
Selective crosslinking of kraft pulp fibres by click chemistry – Characterisation of the properties of reaction intermediates and final product
Foam forming revisited Part I. Foaming behaviour of fibre-surfactant systems
Foam forming revisited. Part II. Effect of surfactant on the properties of foam-formed paper products
Influence of filler content, jet/wire speed ratio and drying section draws on MD relaxation of wet paper and strength properties of dry paper
Effects of fiber dimensions on compression strength of handsheets
Analytical prediction of package collapse – consideration of windows in the package
Bulky paper with good strength and smoothness? Certainly!
Fenton pre-treated microfibrillated cellulose evaluated as a strength enhancer in the middle ply of paperboard
Novel coating of bagasse paper sheets by gelatin and chitosan
Review on Liquid Flame Spray in paper converting: Multifunctional superhydrophobic nanoparticle coatings
The combination of spray and blade coating: Method development and validation on Cylindrical Laboratory Coater
Downloaded on 29.3.2023 from https://www.degruyter.com/document/doi/10.3183/npprj-2014-29-04-p635-652/html
Scroll Up Arrow