Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Refiner optimization and control Part IV: Long term follow up of control performance in TMP processes

  • Anders Karlström , Jan Hill and Karin Eriksson
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2015-30-03-p426-435
Keywords: Refining control; Filtering; Temperature; pulp and paper industry; Decoupling
Published Online: 2018-07-19
Published in Print: 2015-08-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 30 Issue 3

Journal and Issue

Articles in the same Issue

Tailor-made hemicellulose-based hydrogels reinforced with nanofibrillated cellulose for the removal of chromium ions from aqueous solutions
Tailor-made hemicellulose-based hydrogels reinforced with nanofibrillated cellulose
Influence of kaolin addition on the dynamics of oxygen mass transport in polyvinyl alcohol dispersion coatings
Identification of process bottlenecks with global sensitivity analysis, an application to papermaking processes
Evaluation of the influence of lipophilic extractive residues on dissolving pulp quality parameters by partial least squares method of chemometrics
Vapor pressure and boiling point elevation of black liquor
Refiner optimization and control Part III: Natural decoupling in TMP refining processes
Refiner optimization and control Part IV: Long term follow up of control performance in TMP processes
Amphoteric starch preflocculated talc filler for improving composite tensile index and filler bondability of paper
Preparation of individualised lignocellulose microfibrils based on thermomechanical pulp and their effect on paper properties
Improving the extensibility of paper: Sequential spray addition of gelatine and agar
Two-stage versus one-stage refining of unbleached softwood kraft pulp – effects on tensile properties and compression strength
Size and shape characterization of fines and fillers - a review
Heat-Induced changes in oil and grease resistant hydroxypropylated-starch-based barrier coatings Sami-Seppo
Characterizing unprinted paperboard surface for predicting optically induced halftone mottle
Use of cellulose nanofibrils (CNF) in coating colors
Investigation of the friction of flexographic and inkjet prints
Ink and dirt behavior in repulping after artificial aging of coldset offset-printed newspapers at different temperatures
Applying image analysis to measure flake content and flake size distribution in pulping of packaging board
Soy flour detackification of stickies from paper recycling
Downloaded on 31.5.2023 from https://www.degruyter.com/document/doi/10.3183/npprj-2015-30-03-p426-435/html
Scroll to top button