Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

CTMP process optimization Part I: Internal and external variables impact on refiner conditions

  • Anders Karlström and Jan Hill
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2017-32-01-p035-044
Keywords: Modeling; CTMP; Energy efficiency; Pulp consistency; Fiber residence time; Fiber-to-bar interaction; Temperature profile; Motor load distribution
Published Online: 2018-07-19
Published in Print: 2017-01-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 32 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

An eco-friendly scheme to eliminate silica problems during bamboo biomass fractionation
Increased pulp yield by prolonged impregnation in softwood kraft pulping
The Arrhenius Equation is Still a Useful Tool in Chemical Engineering
Characterization of a dusting lime kiln – A mill study
CTMP process optimization Part I: Internal and external variables impact on refiner conditions
Process Considerations and its demands on TMP property measurements – a study on tensile index
Strong paper from spruce CTMP - Part I
Low dosage sulfite pretreatment at different refining temperatures in mill scale TMP production
ATMP pulping of Norway spruce – pulp property development and energy efficiency
Refining of birch kraft pulp before or during xylanase treatment – effect on carbohydrate release and retention behavior
Comparison of optical instruments for fines and filler characterisation
On the net refining energy and tensile development of nbsk pulp in a low consistency refiner
Effect of fiber length on formation and strength efficiency in twin-wire roll forming
Evaluation of the in-plane shear strength of paper measured by tensile-loaded shear test
Modelling of concentrated fibre suspension pipe flow with low-Reynolds-number k-ε turbulence models: new damping function
Effects of Fractionation and Mechanical Treatments of Korean OCC on Paper Properties
A new potential paper resource; recyclability of paper cups coated with water-soluble polyacrylate-based polymer
Downloaded on 22.3.2023 from https://www.degruyter.com/document/doi/10.3183/npprj-2017-32-01-p035-044/html
Scroll Up Arrow