Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

CTMP Process Optimization Part II: Reliability in Pulp and Handsheet Measurements

  • Anders Karlström and Jan Hill
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2017-32-02-p253-265
Keywords: Modeling; Pulp and handsheet properties; CTMP; Energy efficiency; Pulp consistency; Fiber residence time; Temperature profile
Published Online: 2018-07-19
Published in Print: 2017-05-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 32 Issue 2
Submit manuscript

Journal and Issue

Articles in the same Issue

The Evaluation of Experimental Cationic Polyvinyl Alcohol Containing Inkjet Coating Colors replaced by Calcium Carbonate
Characterization of cellulose nanocrystal obtained from electron beam treated cellulose fiber
Viability and properties of roll-to-roll coating of cellulose nanofibrils on recycled paperboard
The use of TAED in the last phase of CMP peroxide bleaching
The effect of different wear on superhydrophobic wax coatings
Mill evaluation of an intensified mechanical pulping process
Improving the optical performance of the nanostructured starch-calcium carbonate hybrid pigments
Roll-to-roll manufacturing of disposable surfaceenhanced Raman scattering (SERS) sensors on paper based substrates
Effect of the ratio of softwood kraft pulp to recycled pulp on formation and strength efficiency in twin-wire roll forming
Development of a paper-based sensor for the qualitative and quantitative detection of Cu2+ in water
Improved microscopy method for morphological characterisation of pulp fines
CTMP Process Optimization Part II: Reliability in Pulp and Handsheet Measurements
CTMP Process Optimization Part III: On the Predicition of Scott-Bond, Z-strength and Tensile index
Miniaturized determination of ash content in kraft lignin samples using oxidative thermogravimetric analysis
Using phospholipase to control natural stickies in old newspaper pulp and the reaction mechanism therein
Biodegradation of thermochromic offset prints
The Effect of Bulk Crystals on Sodium Salt Scaling in Black Liquor Evaporators
Effect of salt concentration in polyelectrolyte multilayering on properties of modified GCC and filled paper
Downloaded on 21.3.2023 from https://www.degruyter.com/document/doi/10.3183/npprj-2017-32-02-p253-265/html
Scroll Up Arrow