Impact Factor: 1.0

Veröffentlicht seit 20. Juni 1964

at - Automatisierungstechnik

Methoden und Anwendungen der Steuerungs-, Regelungs- und Informationstechnik

ISSN: 2196-677X

Editor-in-Chief: Ulrich Jumar

Manuskript einreichen

Über diese Zeitschrift

Objective
Automatisierungstechnik (AUTO) publishes articles covering the entire range of automation technology: development and application of methods, the operating principles, characteristics, and applications of tools and the interrelationships between automation technology and societal developments. The journal includes a tutorial series on "Theory for Users," and a forum for the exchange of viewpoints concerning past, present, and future developments. Automatisierungstechnik is the official organ of GMA (The VDI/VDE Society for Measurement and Automatic Control) and NAMUR (The Process-Industry Interest Group for Automation Technology).

Topics

Regelungstechnik
Messtechnik
Kybernetik
Robotik
Prozessautomatisierung
Modellierung
Informationsverarbeitung
Reglerentwurf
Mensch-Maschine-Schnittstellen
Vernetzte Systeme
maschinelle Lernverfahren
Komplexitätsmanagement
Automatisiertes Fahren
Bioanalysetechnik
Fabrikautomation / intelligente Fabriken
flexible Fertigungssysteme
funktionale Sicherheit
Gebäudeautomation
Mechatronik

Article formats
Overview articles (reviews), methodological papers, applications papers, tools papers

Ihre Vorteile

Your benefits:

Practical relevance of published articles
Important guide on matters related to automation technology
New theoretical methods and their potential areas of application
Close ties to research institutes and universities engaged in automation research
Annual Best Paper Awards sponsored by industry partners
Special Issues on hot topics by renowned Guest Editors

Geschichte

The journal at – Automatisierungstechnik was founded in 1953 in West Germany, at the time entitled rt – Regelungstechnik, nine years after the first German chair for automation control was established at the Technical University of Berlin-Charlottenburg. The first German institute entirely dedicated to automation control was founded in 1955 in Dresden. The division of Germany into East and West as of 1949 affected the German automation control community in terms of knowledge exchange, personal contacts and publication habits, with West German results usually being published in at, while researchers in East Germany published in Messen, Steuern, Regeln (msr), founded in 1957. In 1991, following the German reunification, economic considerations dictated a merger of msr with the practical journal Automatisierungstechnische Praxis (atp), while the more theoretical content previously published by msr found itself drawn to at.

at – Automatisierungstechnik has been closely affiliated with the prime annual automation control conference in Germany, Regelungstechnisches Kolloquium, which is held every February in the town of Boppard near Koblenz. The 50th anniversary of this colloquium was celebrated in 2016 in at with a number of articles including historical accounts and rhymed wit.

Other publications in the field

Vorherige Titel

at - Automatiserungstechnik was originally founded as rt – Regelungstechnik. Its current name was introduced in 1985.

Abstracting und Indexing

at - Automatisierungstechnik ist in den folgenden Services indiziert:

Baidu Scholar
Cabells Journalytics
CNKI Scholar (China National Knowledge Infrastructure)
CNPIEC - cnpLINKer
DBLP Computer Science Bibliography
Dimensions
EBSCO (relevant databases)
EBSCO Discovery Service
Engineering Village
Genamics JournalSeek
Google Scholar
Inspec
Japan Science and Technology Agency (JST)
J-Gate
Journal Citation Reports/Science Edition
JournalGuide
JournalTOCs
KESLI-NDSL (Korean National Discovery for Science Leaders)
MyScienceWork
Naver Academic
Naviga (Softweco)
Primo Central (ExLibris)
Publons
QOAM (Quality Open Access Market)
ReadCube
Reaxys
Scilit
SCImago (SJR)
SCOPUS
Semantic Scholar
Sherpa/RoMEO
Summon (ProQuest)
TDNet
TEMA Technik und Management
Ulrich's Periodicals Directory/ulrichsweb
WanFang Data
Web of Science - Science Citation Index Expanded
WorldCat (OCLC)
X-MOL
Yewno Discover

Zusatzmaterial

Fachgebiete

Externe Links

Online Submission of Manuscripts

Band 71 Heft 9

September 2023

Öffentlich zugänglich 11. September 2023

Frontmatter

Seiten: i-iii

PDF downloaden

Editorial

8. September 2023

Cybersecurity for industrial automation and control systems

Christian Haas, Georg Bretthauer, Jürgen Beyerer

Seiten: 723-725

Forum

8. September 2023

Device discovery and identification in industrial networks

Geräteerkennung und -identifizierung in industriellen Netzen

Klaus Biß, Jörg Kippe, Markus Karch

Seiten: 726-735

Mehr

Abstract

The Act on Federal Office for Information Security (BSI Act) explicitly mandates the use of attack detection systems. The BSI works together with operators of process plants as well as discrete manufacturing facilities in order to test sensors, which may be part of such systems, in their networks. This gives the BSI the opportunity to record a collection of network traffic from those plants. One goal is to improve the detection and characterization of devices in industrial networks by implementing new or enhanced features for the open source network monitoring tool suite Malcolm. In this context, the recording of the network traffic represents the starting point for further investigations. This paper highlights what needs to be considered in these recordings to serve as a basis for device identification and characterization.

Methods

8. September 2023

Towards privacy-preserving cooperative control via encrypted distributed optimization

Philipp Binfet, Janis Adamek, Nils Schlüter, Moritz Schulze Darup

Seiten: 736-747

Mehr

Abstract

Cooperative control is crucial for the effective operation of dynamical multi-agent systems. Especially for distributed control schemes, it is essential to exchange data between the agents. This becomes a privacy threat if the data are sensitive. Encrypted control has shown the potential to address this risk and ensure confidentiality. However, existing approaches mainly focus on cloud-based control and distributed schemes are restrictive. In this paper, we present a novel privacy-preserving cooperative control scheme based on encrypted distributed optimization. More precisely, we focus on a secure distributed solution of a general consensus problem, which has manifold applications in cooperative control, by means of the alternating direction method of multipliers (ADMM). As a unique feature of our approach, we explicitly take into account the common situation that local decision variables contain copies of quantities associated with neighboring agents and ensure the neighbor’s privacy. We show the effectiveness of our method based on a numerical case study dealing with the formation of mobile robots.

8. September 2023

Secure bootstrapping for next-gen industrial automation systems

Sören Finster, Abdallah Dawoud, Florian Kohnhäuser, Abdulkadir Karaagac

Seiten: 748-758

Mehr

Abstract

The digitalization of industry and the convergence of IT and OT bring about the next generation of industrial automation systems which are expected to work with an orchestration of physical and virtualized components using a single converged network. The increase of complexity in such systems must be managed by an increase in automation for orchestration and management. However, bootstrapping such a complex system from out-of-the-box components is still a manual and error-prone process. We present a bootstrapping concept that brings up a system from out-of-the-box components to an operational solution with physical and virtualized components. The concept combines incremental network discovery with secure incremental bootstrapping of discovered physical components. The gained trust in the physical components of the network is then used to translate this trust into virtualized components. By attesting the trustworthiness of hosting infrastructure, the concept allows for virtualized components to be securely assigned a cryptographically secure identity that can be used in further application onboarding. Such securely bootstrapped systems are then capable to deliver the required adaptable, modular, and secure automation solutions of the future.

8. September 2023

Nachvollziehbare Security by Design-Entscheidungen für Automatisierungssysteme mittels funktionsbasierter Diagramme und Security-Bibliotheken

Sarah Fluchs, Emre Taştan, Tobias Trumpf, Alexander Horch, Rainer Drath, Alexander Fay

Seiten: 759-778

Mehr

Abstract

Zusammenfassung „Security by Design“ ist der Begriff für die Verlagerung von Cybersecurity-Überlegungen von den Endnutzern eines Systems auf dessen Planer und Realisierer im Engineering. Um die Last auf den Schultern der Endnutzer zu verringern, müssen Security-Entscheidungen nicht nur während der Entwicklung getroffen werden, sondern auch in einer Weise, die für Dritte nachvollziehbar ist. Planer von industriellen Automatisierungssystemen (ICS) verfügen jedoch in der Regel weder über Security-Expertise noch über Zeit für das Security-Engineering. Die in dieser Arbeit vorgestellte Methode „Security by Design Decisions“ soll sie in die Lage versetzen, Security-Entscheidungen trotzdem selbstständig zu identifizieren, zu treffen und zu begründen. Kernelemente der Methode sind funktionsbasierte Diagramme sowie vordefinierte Bibliotheken mit typischen Funktionen und deren Security-Parametern. Die als Software-Demonstrator implementierte Methode wurde mit HIMA, einem deutschen Spezialisten für sicherheitsgerichtete Automatisierungslösungen, validiert. Die Ergebnisse zeigen, dass Planer mit ihrer Hilfe Security-Entscheidungen identifizieren, treffen und nachvollziehbar dokumentieren können, die sie sonst nicht (bewusst) getroffen hätten – schnell und mit wenig Security-Expertise. Die Methode ist auch gut geeignet, um weniger erfahrenen Personen Wissen über Security-Entscheidungen zugänglich zu machen. Zusammengefasst können mit der Methode „Security by Design Decisions“ mehr Personen in kürzerer Zeit zur „Security by Design“ eines ICS beitragen.

Open Access 8. September 2023

A new hybrid risk assessment process for cyber security design of smart grids using fuzzy analytic hierarchy processes

Sine Canbolat, Ghada Elbez, Veit Hagenmeyer

Seiten: 779-788

Mehr PDF downloaden

Abstract

IT vulnerabilities, cyber threats, and resulting risks significantly impact the stability of current and future power grids. The results of a Risk Assessment process contribute to a better understanding of the causes and nature of the associated risks. The risks assessed by experts are available in both numerical and linguistic representations – this makes it beneficial to include a combination of linguistic and numerical analyses. In this paper, we propose a new Hybrid Risk Assessment method based on fuzzy logic, leading to more precise results. The presented approach specifies the variables and membership functions of fuzzy logic with reference to Smart Grids. For this propose, a case study with five risk events in a small-scale Smart Grid is carried out as an example. The results can then support decision-makers in ensuring grid stability.

Applications

Open Access 8. September 2023

Transformation in substation automation: Cyber-Resilient Digital Substations (CyReDS) in power grids

Dennis Rösch, Thomas Bauer, André Kummerow, Marcel Kühne, Steffen Nicolai, Peter Bretschneider

Seiten: 789-801

Mehr PDF downloaden

Abstract

The digitalization of substations leads to a high degree of automation, which is referred to as Digital Substations with the use of the IEC 61850. An increase in cybersecurity is necessary, and technically enabled by detection and incident response systems – security-by-design is currently often secondary. The next transformation step of substations is introduced and outlined in this paper as a cyber-resilient digital substation. Based on a state-of-the-art description, this paper presents a definition of cyber resilience for digital substations as a basis for the introduced cyber resilience monitor. The monitor acts as a central instance for recording, assessing and responding to security threats and incidents. Furthermore, the requirements for the system structure of the cyber-resilient digital substation are shown and underpinned with current research approaches.

Tools

8. September 2023

Integration of Cyber Threat Intelligence into Security Onion and Malcolm for the use case of industrial networks

Tim Ackermann, Markus Karch, Jörg Kippe

Seiten: 802-815

Mehr

Abstract

With the increasing frequency of cyberattacks on Industrial Control Systems (ICS), the subject of cybersecurity is becoming increasingly important. Cyber Threat Intelligence (CTI) provides information about cyber adversaries, including their intentions and attack techniques. This paper analyzes the availability of open-source CTI for ICS, with a particular focus on technical indicators that can aid in detecting cyberattacks. Furthermore, this paper examines the automated integration of CTI data into SIEM systems and introduces CTIExchange as a tool that facilitates this integration by connecting Threat Intelligence Platforms with detection tools.

Band 71 (2023)

Band 70 (2022)

Band 69 (2021)

Band 68 (2020)

Band 67 (2019)

Band 66 (2018)

Band 65 (2017)

Band 64 (2016)

Band 63 (2015)

Band 62 (2014)

Band 61 (2013)

Band 60 (2012)

Band 59 (2011)

Band 58 (2010)

Band 57 (2009)

Band 56 (2008)

Band 55 (2007)

Band 54 (2006)

Band 53 (2005)

Band 52 (2004)

Band 51 (2003)

Band 50 (2002)

Band 49 (2001)

Band 48 (2000)

Band 47 (1999)

Band 46 (1998)

Band 45 (1997)

Band 44 (1996)

Band 43 (1995)

Band 42 (1994)

Heft 1-12

Band 41 (1993)

Band 40 (1992)

Band 22 (1974)

Band 21 (1973)

Heft 1-12

Band 20 (1972)

Heft 1-12

Band 19 (1971)

Heft JG

Band 18 (1970)

Heft JG

Band 17 (1969)

Band 16 (1968)

Heft JG

Band 15 (1967)

Heft 1-12

Band 14 (1966)

Heft 1-12

Band 13 (1965)

Heft 1-12

Band 12 (1964)

Heft 1-12

Band 11 (1963)

Heft 1-12

Band 10 (1962)

Heft 1-12

Band 9 (1961)

Heft 1-12

Band 8 (1960)

Heft 1-12

Band 7 (1959)

Heft 1-12

Band 6 (1958)

Heft 1-12

Band 5 (1957)

Heft 1-12

Band 4 (1956)

Heft 1-12

Band 3 (1955)

Heft 1-12

Band 2 (1954)

Heft 1-12

Band 1 (1953)

Heft 1-12

Journal Impact Factor	1.0	2022, Journal Citation Reports (Clarivate, 2023)
5-year Journal Impact Factor	0.9	2022, Journal Citation Reports (Clarivate, 2023)
Journal Citation Indicator	0.18	2022, Journal Citation Reports (Clarivate, 2023)
CiteScore	1.9	2022, Scopus (Elsevier B.V., 2023)
SCImago Journal Rank	0.328	2022, SJR (Scimago Lab, 2023; Data Source: Scopus)
Source Normalized Impact per Paper	0.649	2022, CWTS Journal Indicators (CWTS B.V., 2023; Data Source: Scopus)

Weitere Informationen über Zeitschriftenmetriken

Einreichen

Submission
You can submit your manuscript online using the Editorial Manager system. Simply visit http://www.editorialmanager.com/aut/default.aspx directly or click on the link Online Submission of Manuscripts on the journal homepage. For a guide how to use the Editorial Manager please refer to the Author Tutorial for Editorial Manager, also linked on the journal homepage.

Your benefits of publishing with us

Rapid online publication with short turnaround times
High impact
High quality blind peer-review
Free publication of color figures in print and online
No page charges
Optional open access publication
Accepted papers will be published online first as DOI-citable, forward-linked articles for quickest possible visibility for the scientific community
Every article easily discoverable because of Search Engine Optimization (SEO) and comprehensive abstracting and indexing services
Secure archiving by De Gruyter and the independent archiving service Portico
Professional sales and marketing activities

Submission process

Check that your topic fits the scope of the journal
Use our LaTeX or Word templates for drafting a manuscript Submission of your paper via our submission management tool
The editorial office will forward your manuscript to the Editor-in-Chief for evaluation and peer-review. We aim to provide decisions after peer-review within 3 months of receipt (including any author revisions); papers deemed unsuitable for the journal will usually be returned to authors within two weeks of submission
You will be guided through every step of peer review process
Decision on your paper
You will be informed by e-mail if your manuscript has been accepted or rejected or if it requires further attention
Hybrid Open Access is available as an option post-acceptance
Publication online and in print

Please note

Before submitting your article please refer to our at Ethical Guidelines and our Copyright Transfer Agreement
Manuscripts must be written in clear and concise German or English
For German articles we recommend that authors additionally include abstract and keywords in English
Our Repository Policy allows you to distribute 30 PDF copies of your published article to colleagues (the PDF has to include the information that it is an author's copy). Please also feel free to distribute the link to the online abstract
If you have any general questions please visit our FAQ page for authors or contact us directly at AUTO.Editorial@degruyter.com

We look forward to receiving your manuscript!

Hybrid Open Access

In this journal, authors have the option to publish their article under an open access license. Open Access allows you as an author to retain copyright and share your findings with colleagues and interested parties worldwide without any restraints.
Please note that authors from institutions with which we have a transformative agreement can publish open access without paying an article processing charge (APC). More information on the eligible institutions and articles can be found under the "Funding and Support" tab here.

Editorial

Editor-in-Chief
Prof. Dr.-Ing. Ulrich Jumar, ifak, Magdeburg

Advisory Board
Prof. Dr.-Ing. Jürgen Adamy, TU Darmstadt
Prof. Dr.-Ing. habil. Jürgen Beyerer, Fraunhofer-IOSB, Karlsruhe
Prof. Dr.-Ing. habil. Georg Bretthauer, Karlsruher Institut für Technologie
Prof. Dr.-Ing. Alexander Fay, Helmut-Schmidt-Universität, Hamburg
Prof. Dr.-Ing. Sören Hohmann, Karlsruher Institut für Technologie
Prof. Dr.-Ing. Tobias Kleinert, RWTH Aachen
Dr. Kim Listmann, Bender GmbH & Co KG, Grünberg
Prof. Dr. Ralf Mikut, Karlsruher Institut für Technologie
Dr.-Ing. Jörg Neidig, Siemens AG, Nürnberg
Prof. Dr.-Ing. Georg Rauter, University of Basel
Prof. Dr.-Ing. habil. Dipl.-Math. Klaus Röbenack, TU Dresden
Prof. Dr.-Ing. habil. Joachim Rudolph, Universität des Saarlands, Saarbrücken
Prof. Dr.-Ing. habil. Martin Wolter, Otto-von-Guericke-Universität Magdeburg
Prof. Dr. Ningbo Yu, Nankai University, Tianjin, P.R. China

Journal Coordinator
Birgit Zoglmeier
De Gruyter, Munich
AUTO.Editorial@degruyter.com

(English)

Online ISSN: 2196-677X
Print ISSN: 0178-2312
Typ: Zeitschrift
Sprachen: Deutsch, Englisch
Verlag: De Gruyter (O)
Erstveröffentlichung: 20. Juni 1964
Erscheinungsweise: 12 Hefte pro Jahr
Zielgruppe: researchers in the field of automation technology in academia and industry