Open Access Published by De Gruyter

Volume 8 Issue 1

Issue of e-Polymers

Submit manuscript

Contents
Journal Overview

About this journal

e-Polymers is an open access, single-blind peer-reviewed scientific journal. The aim of e-Polymers is to publish, in an ongoing way, pure and applied polymer-science-related original research articles, reviews, and feature articles. It includes synthetic methodologies, characterization, and processing techniques for polymer materials. Reports on interdisciplinary polymer science and on applications of polymers in all areas are welcome.

In 2013 e-Polymers has been transferred from the e-Polymer Foundation to the scientific publisher De Gruyter. Prof. Seema Agarwal and Prof. Andreas Greiner took over as Editors-in-Chief. e-Polymers is dedicated to serve the polymer community and will continue publishing scientific contributions on highest possible standards.

The present Editor-in-Chief, Prof. Seema Agarwal, would like to thank the authors, the reviewers, the editorial staff, the advisory board, and the supporting organization that made e-Polymers a successful and sustainable scientific journal of the polymer community. The Editors of e-Polymers feel very much engaged to provide best publishing services at the highest possible level.

Topics

Pure and Applied Polymer Science
Organic Chemistry
Industrial Chemistry
Polymer Science and Technology

Article formats
Research Article, Review Article, Rapid Communication, Erratum

Information on submission process

Secure archiving by De Gruyter and the independent archiving service Portico

Special Issues:

"Biodegradable and bio-based polymers: Green approaches"
Guest Editors: Dr. Kumaran Subramanian (Sathyabama Institute of Science and Technology, Jeppiaar Nagar, India), Prof. A. Wilson Santhosh Kumar (AMITY University, Mumbai, India), and　Dr. Venkatajothi Ramarao (The Copperbelt University, Ndola, Zambia)

Submission deadline: August 31, 2023

Volume 8 Issue 1

Issue of e-Polymers

Swelling of iota-carrageenan gels prepared with various CaCl2 content: A fluorescence study

Abstract

A Study of Crystallinity of Graft Copolymers of Flax Fiber with Binary Vinyl Monomers

Abstract

Preparation, Characterization and Antifoaming Property of Fluorosilicone Oils with Fluoroalkyloxypropyl Group Substitution

Abstract

Investigation of Ethylene Polymerization Kinetics over Ziegler-Natta Catalysts: Employing Moment Equation Modeling to Study the Effect of Different Active Centers on Homopolymerization Kinetics

Abstract

Novel poly(aryl ether ketone)s with anthracene in the backbone

Abstract

Effect of Melting Conditions on Crystallization Behavior of Poly(trimethylene terephthalate)

Abstract

Sulphonation of Expanded Polystyrene Waste Under Microwave Irradiation

Abstract

Synthesis and Characterization of Highly Soluble and Heat Stable New Poly(amide-ether)s Containing Pyridine Rings in the Main Chain

Abstract

Copolymerization of Ethylene and 1-Hexene Catalyzed by the Zirconocene/Al(i-Bu)3/B(C6F5)3 Catalytic System

Abstract

Anti-reflection and anti-static (AR/AS) coatings made by TiO2 sol-gel process with poly(3,4-ethylenedioxy thiophene)

Abstract

Preparation and Characterization of Novel Sulfonated Copolyimide Membranes

Abstract

Surface Characterization of Absorbing Polymer Films Deposited on Transparent Glasses

Abstract

Second Order Nonlinear Optical Properties of Multifunctional Chiral Azobenzene Polymers

Abstract

Viscosimetric studies of chitosan nitrate and chitosan chlorhydrate in acid free NaCl aqueous solution

Abstract

Mechanical behavior of high impact polystyrene based on SB copolymers as a function of synthesis conditions: Part II

Abstract

Use of 4-vinylpyridine and 2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fibers for removal of congo red from aqueous solution

Abstract

Controlled release of indomethacin from crosslinked alginate beads

Abstract

Use of the SPME-GC-MS technique to study the thermal degradation of isotactic polypropylene: Effects of temperature and reaction time, and analysis of the reaction mechanism

Abstract

Effect of the initial water activity on the yields and molecular wWeights of the lipase-catalysed synthesis of aliphatic polyesters in low pressure liquid R-134a

Abstract

MWNT Surface Self-Assembling in Fire Retardant Polyethylene-Carbon nanotubes nanocomposites

Abstract

A high mechanical strength hydrogel from polyacrylamide/polyacrylamide with interpenetrating network structure by two-steps synthesis method

Abstract

Sisal, Sugarcane Bagasse and Microcrystalline Celluloses: Influence of the Composition of the Solvent System N,NDimethylacetamide /Lithium Chloride on the Solubility and Acetylation of these Polysaccharides

Abstract

Dispersion, mechanical and thermal properties of nano graphite platelets reinforced flouroelastomer composites

Abstract

Synthesis and characterization of triphenylamine and Bbis(indolyl)methane center-functionalized polymer via reversible addition-fragmentation chain transfer polymerization

Abstract

AGET ATRP of Acrylamide in Aqueous Media

Abstract

Effect of Curing System on Mechanical Properties of NBR/Nylon-PET Cord Composite

Abstract

Chain Extender and Diisocyanate Amount Effects on the Thermal, Mechanical and Wettability Properties of Some Polyurethane Elastomers

Abstract

Synthesis and RGD peptide modification of poly{(lactic acid)-co-[(glycolic acid )-alt-(L-lysine)]}

Abstract

Synthesis and swelling behaviour of fast-swelling superabsorbent composites

Abstract

Stability of inverse microemulsions of acrylamide-based anionic flocculants: evidence about the need of unsaturated surfactants

Abstract

First approach on transfection ability of novel amphiphilic water soluble degradable poly(ε-caprolactone)-g-poly(Llysine) copolymers

Abstract

Electrical conductivity of poly(N-vinylcarbazole)-based polysodium-2,9,16,23-tetramethylamine tetracyclohexane tetrazaporphyrin composites

Abstract

Polypropylene + Polystyrene Blends with a Compatibilizer. Part I. Morphology and Thermophysical Properties

Abstract

Polypropylene + Polystyrene Blends with a Compatibilizer. Part 2. Tribological and Mechanical Properties

Abstract

Sulfur containing optical plastics and its ophthalmic lenses applications

Abstract

Modeling the physical properties of a homologous series on the melting temperatures and densities of n-alkanes and their simple alkyl-derivatives

Abstract

Migration of model contaminants (ethylene glycol, DEHA and DEHP) from PET bottles into Iranian yogurt drink

Abstract

Polyamide-6/montmorillonite nanocomposites toughened with ABS-g-MA core-shell structural particles

Abstract

Rheological behaviour of low/high density polyethylene melt flowing through micro-channels

Abstract

Swelling of iota-carrageenan gels prepared with various CaCl₂ content: A fluorescence study

Copolymerization of Ethylene and 1-Hexene Catalyzed by the Zirconocene/Al(i-Bu)₃/B(C₆F₅)₃ Catalytic System

Anti-reflection and anti-static (AR/AS) coatings made by TiO₂ sol-gel process with poly(3,4-ethylenedioxy thiophene)

Synthesis and Characterization of Poly(methyl acrylate) + SiO₂ Hybrids