Direct electrostatic coating of paper
Robert H. Marchessault, Patrice Rioux and Ilie Saracovan,
Keywords: Coated papers, Polyolefins, Poly-P-hydroxyal-
kanoates, Electrostatic coating, Corona discharge, Xerogra-
phy, Toners, Adhesive strength, Barrier properties, Moisturetransmission.
SUMMARY: Direct Electrostatic Coating (DEC) of paper
uses "as polymerized" reactor polyolefin and an electrostatic
spraying applicator. A glossyltransparent polymer coat was
obtained after hot-pressing the electrostatically deposited pow-
der layer on the paper surface
References  Das, B., Das, A., Kothari, V.K., Fanguiero, F., de Araújo, M. (2007). Moisturetransmission through textiles Part I: Processes involved in moisturetransmission and the factors at play. AUTEX Research Journal, 7(2), 100-110.  Das, B., Das, A., Kothari, V.K., Fanguiero, F., de Araújo, M. (2007). Moisturetransmission through textiles Part II: Evaluation Methods and Mathematical Modelling. AUTEX Research Journal, 7(3), 194-216.  Ciesielska-Wrobel, I., De Mey, G., Van Langenhove, L. (2016). Dry heat transfer from the skin surface into textiles
& Textile Research, 35(2), 128.  Hearle, J. W. S. and Morton, W. E. (2008). Physical Properties of Textile Fibres. 4th ed. Cambridge: Woodhead.  Das, B., Das, A., Kothari, V., Fanguiero, R., and Araujo, M. (2007). Moisturetransmission through textiles. Part I: processes involved in moisturetransmission and the factors at play, AUTEX Research Journal, (2), 7.  Frydrych, I., Dziworska, G., and Bilska, J. (2002). Comparative analysis of the thermal insulation properties of fabrics made of natural and man-made cellulose fibers. Fibers and Textiles in Eastern
unbleached cotton better than bleached? Exploring the limits of life-cycle assessment in the textile sector. Clothing and Textiles Research Journal, 2015. 33(4): p. 231-247.  Behera, B., Comfort and handle behaviour of linen blended fabrics. AUTEX Research Journal, 2007. 7(1): p. 33-47.  Das, B., et al., Moisturetransmission through textiles. Part I: processes involved in moisturetransmission and the factors at play, AUTEX Research Journal, 2007. 2(7).  Standard, A., D737-04. Test Method for Air Permeability of Textile Fabrics, 2008.
References  B. Das, A. Das, V. K. Kothari, R. Fanguiero, and M. de Araújo, “Moisturetransmission through textiles: Part I: Processes involved in moisturetransmission and the factors at play,” Autex Res. J., vol. 7, no. 2, pp. 100–110, 2007.  A. K. Haghi, “Experimental survey on heat and moisture transport through fabrics,” Int. J. Appl. Mech. Eng., vol. 10, no. 2, pp. 217–226, 2005.  P. Chidambaram, R. Govindan, and K. C. Venkatraman, “Study of thermal comfort properties of cotton/regenerated bamboo knitted fabrics,” African J. Basic Appl. Sci., vol. 4
References  Slater, K. (1985). Human comfort. Springfield, Ill., U.S.A:
 Song, G. (2011). Improving Comfort in Clothing. Woodhead
 Li, Y. and Wong, A. S. (2006). Clothing Biosensory
Engineering. Woodhead Publishing Limited.
 Das, B., Das, A., Kothari, V., Fangueiro, R., and de Araujo,
M. (2007). Moisturetransmission through textiles. Part II:
Evaluation methods and mathematical modelling. AUTEX
Research Journal, 7(3), 194-216.
 Dongping, L. and Mai, N. (2009). in Second International
Conference on Information
Experiment and Image Processing, Review of Scientific Instruments, 77(9), 093502 - 093502-6  Nath, J., et al., (2001). Design and Development of Multipurpose Absorption Rate Meter, Journal of Agricultural Engineering, 38 (2), 134-140.  Nazir, A., et al., (2014). Effect of Knitting Parameters on Moisture Management and Air Permeability of Interlock Fabrics, AUTEX Research Journal, 14(1), 39-46  Nemcokova, R., Komarkova, P., (2014). Experimental Measurement of Liquid MoistureTransmission Through Textiles, Vlakna a textil, 21 (4), 39-47  Odgaard, A., (1997
on heat transfer in firefighter turnout clothing by a sweating manikin. Textile Research Journal, 77(2), 59-66.  Zhiying, C, Yanmin, W, Weiyuan, Z. (2010). Thermal protective performance and moisturetransmission of firefighter protective Clothing based on orthogonal design. Journal of Industrial Textiles, 39(4), 347-356.  Keiser, C., Becker, C. Rossi, R. M. (2008). Moisture transport and absorption in multilayer protective clothing fabrics. Textile Research Journal, 78(7), 604-613.  Fu, M., Weng, W., Han, X. (2013). Effects of moisture transfer and
References  Adams, P.S., Keyserling, W.M. (1993). Three methods for measuring range of motion while wearing protective clothing: A comparative study. International Journal of Industrial Ergonomics,12, 177-191.  Bartkowiak, G., Dąbrowska, A., Włodarczyk, B. (2015). Construction of a garment for an integrated liquid cooling system, Textile Research Journal, 85(17), 1809-1816.  Behera, B., Hari, P. (Ed.). (2010). Woven textile structure: Theory and applications. Woodhead Publishing (Cambridge).  Das, B., Das, A., Kothari. V., et al. (2007). Moisture
cellulose films immersed in water (Yang et al. 2012).
Most biopolymers and especially cellulosic materials
are very poor moisture barrier materials. Water molecules
diffuse easily into the structure and break the hydrogen
bonds that hold the chains together. At high humidity
conditions, the films tend to swell as a result of moisture
absorption. Cellophane and CNF films had relatively high
water permeability, which correlates well with the
moisture absorption measurements. Walnut oil
impregnation and further crosslinking decreased the