Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Drilling Technology

Fundamentals and Recent Advances

Ed. by Davim, J. Paulo

Series:Advanced Mechanical Engineering

eBook (PDF)
Publication Date:
October 2018
Copyright year:
2018
ISBN
978-3-11-048120-4
See all formats and pricing

6. Analysis and optimization of hole quality parameters in cenosphere-multiwall carbon nanotube hybrid composites drilling using artificial neural network and gravitational search technique

Gaitonde, V. N. / Shashikant / Lakkundi, Anand / Karnik, S. R. / Deshpande, A. S. / Davim, J. Paulo

Abstract

Analysis and optimization of hole quality parameters in drilling of cenosphere- multiwall carbon nanotubes (MWCNTs) - epoxy composite materials have been presented in this chapter. The hybrid composite material is being prepared with 40% by weight of cenosphere with varying 0.2%, 0.3% and 0.4% of MWCNT as a filler and epoxy as matrix. The full factorial design (FFD) was planned to reduce the drilling experiments. The influence of four factors: explicit cutting speed, feed, % weight of MWCNT and drill diameter of hole quality parameters such as circularity error, drilled hole surface roughness and delamination factor have been studied. The artificial neural network (ANN)-based modeling analysis indicates that an addition of MWCNT reinforced with cenosphere-epoxy resin decreases the circularity error and surface roughness, whereas delamination is found to be minimal for 0.2% of MWCNT reinforcement drilling. To reduce the circularity error, 0.3% MWCNT reinforcement is desirable for drill diameters in the range 8-16 mm. For a particular drill size and MWCNT combination, the concurrent increase in cutting speed with feed has visible consequence for reducing the surface roughness. With 0.4% MWCNT reinforcement drilling, more delamination is observed for all the specified speed-feed combinations. ANN models were later used for gravitational search (GS) technique to decide the best combinations of cutting conditions for a particular drill diameter and % MWCNT for minimal circularity error, surface roughness and delamination factor.

Citation Information

V. N. Gaitonde, Shashikant, Anand Lakkundi, S. R. Karnik, A. S. Deshpande, J. Paulo Davim (2018). 6. Analysis and optimization of hole quality parameters in cenosphere-multiwall carbon nanotube hybrid composites drilling using artificial neural network and gravitational search technique. In J. Paulo Davim (Editor), Drilling Technology: Fundamentals and Recent Advances (pp. 161–188). Berlin, Boston: De Gruyter. https://doi.org/10.1515/9783110481204-006

Book DOI: https://doi.org/10.1515/9783110481204

Online ISBN: 9783110481204

© 2018 Walter de Gruyter GmbH, Berlin/Munich/BostonGet Permission

Comments (0)

Please log in or register to comment.
Log in