1. United States Bureau of Reclamation. “Pre-stressed Concrete Pipe Failure Jordan Aqueduct, Reach 3” 1994. All U.S. Government Documents (Utah Regional Depository), Paper284. http://digitalcommons.usu.edu/govdocs/284, assessed on 20/04/2014.
2. K. M. Mahmoud, “Fracture strength for a high strength steel bridge cable wire with a surface crack”, Theoretical and Applied Fracture Mechanics, vol 48(2), 152–160, 2007.Google Scholar
3. J. Toribio, and F. J. Ayaso, “Anisotropic fracture behaviour of cold drawn steel: a materials science approach”, Materials Science and Engineering, vol A343, 265–272.Google Scholar
4. J. Toribio, and F. J. Ayaso, “Fracture Performance of Progressively Drawn Pearlitic Steel under Triaxial Stress States”, Materials Science, vol. 37(5), 70–717, 2001.Google Scholar
5. J. Toribio, and A. Valiente, “Failure analysis of cold drawn eutectoid steel wires for pre-stressed concrete”, Engineering Failure Analysis, 13 (3), 301–311, 2006.Google Scholar
6. G. F. Vander Voort, “Visual Examination and Light Microscopy”, ASM Handbook, vol. 12: Fractography, 91–165, 1987, ASM web. www.asminternational.org, Assessed 15th June, 2014.
7. S. Peet, and A. Wilde, “Laminations-origin, detection and assessment”, Congreso Internacional de Ductos, 14–16 November, 2001, Merida Yucatan, Mexico.Google Scholar
8. K. K. Adewole, and S. J. Bull, “Effectiveness of the reverse bending and straightening tests in detecting laminations in wires for civil engineering applications”, Archives of Civil Engineering, 59(4), 423–439, 2013.Google Scholar
9. K. K. Adewole, “Identification of Appropriate Micromechanical Fracture Model for Predicting Fracture Performance of Steel Wires for Civil Engineering Applications”, Global Journal of Researches in Engineering: Civil And Structural Engineering, 13(3), 24–33, 2013.Google Scholar
10. K. K. Adewole. Numerical prediction of the effects of longitudinal crack-like laminations on the tensile properties of wires, Journal of Civil Engineering and Management, 2014, in press.Google Scholar
11. K. K. Adewole. Appropriate Mesh Design for Predicting Complete Fracture Behavior of Wires for Civil Engineering Applications”, American Society of Civil Engineers Journal of Materials in Civil Engineering, 2014, DOI: 10.1061/(ASCE)MT.1943–5533.0001064, in press.CrossrefGoogle Scholar
12. K. K. Adewole. Numerical prediction of the effects of longitudinal crack-like laminations on the tensile properties of wires, Journal of civil engineering and management, doi:10.3846/13923730.2014.91409, in press.CrossrefGoogle Scholar
About the article
Published Online: 2015-09-30
Published in Print: 2014-12-01
Citation Information: Archives of Civil Engineering, Volume 60, Issue 4, Pages 397–408, ISSN (Online) 1230-2945, DOI: https://doi.org/10.2478/ace-2014-0027.
© Polish Academy of Sciences. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License. BY-NC-ND 3.0