Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

4 Issues per year


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Open Access
Online
ISSN
2299-2944
See all formats and pricing
More options …

Locally Reinforcement TiC-Fe Type Produced in Situ in Castings

E. Olejnik
  • Corresponding author
  • INNERCO Ltd., Zarzecze 42 30-134 Cracow, Poland
  • AGH University of Science and Technology, Department of Engineering of Cast Alloys and Composites, Faculty of Foundry Engineering, Reymonta 23, 30-059 Cracow, Poland
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Ł. Szymański
  • INNERCO Ltd., Zarzecze 42 30-134 Cracow, Poland
  • AGH University of Science and Technology, Department of Foundry Processes Engineering, Faculty of Foundry Engineering, Reymonta 23, 30-059 Cracow, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ P. Kurtyka
  • Pedagogical Univeristy of Cracow, Institute of Technology, Faculty of Mathematics, Physics and Technical Science, Podchorazych 2, 30-084 Cracow, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ T. Tokarski
  • AGH University of Science and Technology, Academic Centre of Materials and Nanotechnology, al. Mickiewicza 30, 30-059 Cracow, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ W. Maziarz
  • Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Reymonta 25 St. 30-059 Krakow, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ B. Grabowska
  • AGH University of Science and Technology, Department of Foundry Processes Engineering, Faculty of Foundry Engineering, Reymonta 23, 30-059 Cracow, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ P. Czapla
  • AGH University of Science and Technology, Department of Foundry Processes Engineering, Faculty of Foundry Engineering, Reymonta 23, 30-059 Cracow, Poland
  • EUROCAST INDUSTRIES Ltd., Grabowa 21/7, 30-227 Cracow, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2016-09-23 | DOI: https://doi.org/10.1515/afe-2016-0054

Abstract

Refinement is one of the most energy consuming technological process, aimed at obtaining mineral raw materials of the proper grain size. Cast structural elements such as jaws or hammers in crushing machines operate under conditions of an intensive wear. The data indicate that 80 % of failures of machines and devices is caused by wearing of rubbing surfaces. This problem became the subject of several scientific and industrial investigations carried out in the whole world in order to produce materials ultra- wear resistant. Methods allowing to obtain wear resistant composite castings are discussed in the hereby paper. Within the performed research microstructures of the produced composite zones were presented and the comparative analysis with regard to mechanical and functional properties of local composite reinforcements in relation to the commercial alloys of increased wear resistance was performed. The results show almost twenty five times increase in wear resistance compared to manganese cast steel containing 18 % Mn.

Keywords: MMCs; Locally reinforcement; TiC; In situ; Hardness; Ball-on-disc

References

  • [1] Dobrzański, L.A., Matula, G. (2012). Basics of powder metallurgy and sintered materials. Open Access Library. 8(14), 1-156. (in Polish).Google Scholar

  • [2] Kilarski, J., Studnicki, A., Suchoń, J. (2009). Ferro-alloys used in the cast component subjected to wear. Postępy teorii i praktyki odlewniczej. 211-230. (in Polish).Google Scholar

  • [3] Sakwa, W., Jura, S., Sakwa, J. (1980). Wear-resistant cast alloys of iron. Part I. Cast Iron. Kraków: ZG STOP. (in Polish).Google Scholar

  • [4] Sakwa, W., Jura, S., Sakwa, J. (1980). Wear-resistant cast alloys of iron. Part I. Cast Steel. Kraków: ZG STOP. (in Polish).Google Scholar

  • [5] Olejnik, E., Sikora, G., Sobula, S., Tokarski, T. & Grabowska, B. (2014). Effect of compaction Pressure Applied to TiC Reactants on the Microstructure and Properties of Composite Zones Produced in situ in Steel Castings. Material Science Forum. 782, 527-532.Google Scholar

  • [6] Olejnik, E., Sobula, S., Tokarski, T. & Sikora, G. (2013). Composite zones obtained by in situ synthesis in steel casting. Archives of Metallurgy and Materials. 58, 769-773Google Scholar

  • [7] Dolata, A.J. (2014). Centrifugal castings locally reinforced with porous Al2O3 preform. Archives of Metallurgy and Materials. 59(1), 345-348.Google Scholar

  • [8] Dolata, A., Śleziona, J., Formanek, B. & Wieczorek, J. (2005). Al-FeAl-TiAl-Al2O3 composites with hybrid reinforcement. Journal of Materials Processing Technology. 162-163, 33-38.Google Scholar

  • [9] Myalski, J. & Sleziona, J. (2006). Glassy carbon particles as component to modification of tribological properties. Journal of Materials Processing Technology. 175(1-3), 291-298.Google Scholar

  • [10] Lelito, J., Żak, P. & Suchy, J.S. (2009). The grain nucleation rate of the AZ291/SiC composite based on Maxwell-Hellawell Model. Archives of Metallurgy and Materials. 54(2), 347-350.Google Scholar

  • [11] Fraś, E., Janas, A., Kolbus, A. & Górny, M. (1999). Cu + TiC Composites synthesis by RGI process. Archives of Metallurgy. 44(3), 253-266.Google Scholar

  • [12] Janas, A., Kolbus, A. & Olejnik, E. (2009). On the character of matrix – reinforcing particle phase boundaries in MeC and MeB (Me = W, Zr, Ti, Nb, Ta) in stu composite. Archives of Metallurgy and Materials. 54(2), 319-327.Google Scholar

  • [13] Fengjum, C. & Yison, W. (2007). Microstructure of Fe-TiC surface composite produced by cast sintering. Materials Letters. 61, 1517-1521.Google Scholar

  • [14] Feng, K., Yang, Y., Shen, B. & Guo, L. (2005). In situ synthesis of TiC/Fe composites by reaction casting. Materials and Design. 26, 37-40.Google Scholar

  • [15] Fraś, E., Olejnik, E., Janas, A. & Kolbus, A. (2009). FGMs generated method SHSM. Archives of Foundry Engineering. 9(2), 123-128.Google Scholar

  • [16] Merzhanov, A.G. (1996). Combustion processes that synthesize materials. Journal of Materials Processing Technology. 56(1-4), 222-241Google Scholar

  • [17] Fraś, E., Olejnik, E., Janas, A. & Kolbus, A. (2010). Fabrication of in situ composites layer on cast steel. Archives of Foundry Engineering. 10(1), 175-180.Google Scholar

  • [18] Fraś, E., Olejnik, E., Janas, A. & Kolbus, A. (2010). The morphology of TiC carbides produced in surface layers of carbon steel castings. Archives of Foundry Engineering. 10(4), 39-42.Google Scholar

  • [19] Olejnik, E., Janas, A., Kolbus, A. & Grabowska, B. (2011). Composite layer fabricated by in situ technique in iron castings. Composites. 11(2), 120-124.Google Scholar

  • [20] Park, H.I., Nakata, K. & Tomida, S. (2000) In situ formation of TiC particulate composite layer on cast iron by laser alloying of thermal sprayed titanium coating. Journal of Materials Science. 35(3), 747-755.Google Scholar

  • [21] Kurtyka, P., Rylko, N., Tokarski, T., Wójcicka, A. & Pietras, A. (2015). Cast aluminium matrix composite modified with using FSP process. Changing of the structure and mechanical properties. Composite structures. 133, 959-967Google Scholar

  • [22] Fraś, E., Janas, A., Wierzbiński, S. & Kolbus A. (2000). Cast aluminum composites “in situ” reinforced titanium carbides. Solidification of Metals and Alloys. 2(43), 167-174. (in Polish).Google Scholar

  • [23] Olejnik, E., Górny, M., Tokarski, T., Grabowska, B., Kmita, A. & Sikora, G. (2013). Composite zones produced in iron castings by in-situ synthesis of TiC carbides. Archives of Metallurgy and Materials. 58(2), 465-471.Google Scholar

  • [24] Opris, C.D., Liu, R., Yao, M.X. & Wu, X.J. (2007). Development of Stellite alloy composites with sintering/HIPing technique for wear-resistant applications. Materials and Design. 28(2), 581-591.Google Scholar

  • [25] Kopyciński D., Kawalec, M., Szczęsny, A., Gilewski, R. & Piasny, S. (2013). Analysis of the structure and abrasive wear resistance of white cast iron with precipitates of carbides. Archives of Metallurgy and Materials. 58(3), 973-976.Google Scholar

About the article

Received: 2016-04-15

Accepted: 2016-05-24

Published Online: 2016-09-23

Published in Print: 2016-09-01


Citation Information: Archives of Foundry Engineering, ISSN (Online) 2299-2944, DOI: https://doi.org/10.1515/afe-2016-0054.

Export Citation

© 2016 E. Olejnik et al., published by De Gruyter Open. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License. BY-NC-ND 3.0

Comments (0)

Please log in or register to comment.
Log in