Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

4 Issues per year


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Open Access
Online
ISSN
2300-1909
See all formats and pricing
More options …

Application of Anodization Process for Cast Aluminium Surface Properties Enhancement

A. Włodarczyk-Fligier
  • Corresponding author
  • Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, 18A Konarskiego Str., 44-100 Gliwice, Poland
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ K. Labisz
  • Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, 18A Konarskiego Str., 44-100 Gliwice, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ M. Polok-Rubiniec
  • Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, 18A Konarskiego Str., 44-100 Gliwice, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ J. Konieczny
  • Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, 18A Konarskiego Str., 44-100 Gliwice, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2016-10-17 | DOI: https://doi.org/10.1515/amm-2016-0222

Abstract

An huge interest is observed in last years in metal matrix composite, mostly light metal based, which have found their applications in many industry branches, among others in the aircraft industry, automotive-, and armaments ones, as well as in electrical engineering and electronics, where one of the most important issue is related to the corrosion resistance, especially on the surface layer of the used aluminium alloys. This elaboration presents the influence of ceramic phase on the corrosion resistance, quality of the surface layer its thickness and structure of an anodic layer formed on aluminium alloys. As test materials it was applied the aluminium alloys Al-Si-Cu and Al-Cu-Mg, for which heat treatment processes and corrosion tests were carried out. It was presented herein grindability test results and metallographic examination, as well. Hardness of the treated alloys with those ones subjected to corrosion process were compared.

Keywords: Surface Treatment; Aluminium alloys; Ceramic materials; Composites; Corrosion resistance

REFERENCES

  • [1] K. Labisz, Mat.-wiss. u. Werkstofftech. 45 314-324 (2014), DOI: 10.1002/mawe.201400231.CrossrefGoogle Scholar

  • [2] J. Konieczny, L. A. Dobrzański, K. Labisz, J. Duszczyk, J. Mater, Process Tech, Spec. Iss. 718-723 (2004).CrossrefGoogle Scholar

  • [3] M. Michalska-Domańska, M. Norek, W. J. Stępniowski, B. Budner, Electrochim Acta 105, 424-432 (2013).Google Scholar

  • [4] Y. Goueffon, L. Arurault, C. Mabru, C. Tonon, P. Guigue, J Mater Process Tech 209, 5145–5151 (2009).Google Scholar

  • [5] P. G. Sheasby, R. Ch. Pinner, ASM International & Finishing Publications 427-596 (2001).Google Scholar

  • [6] M. Gombar, S. Hloch, Mechanics 73, 101-104 (2008).Google Scholar

  • [7] A. Hakimizad, K. Raeissi, F. Ashrafizadeh, Surf Coat Tech 206, 2438–2445 (2012).Google Scholar

  • [8] J-h. Liu, M. Li, S.-M. Li, M. Huang, Inter. J. of Minerals, Metallurgy and Materials 16/4, 432-438 (2009).Google Scholar

  • [9] F. Keller, M. S. Hunter, D. L. Robinson, J. Electrochem. Soc., 100/9, 411 – 419 (1953).Google Scholar

  • [10] F. Riddar, S. Hogmark, Å. Kassman Rudolphi, J Mater Process Tech 212/11, 2272–2281 (2012).Google Scholar

  • [11] A. Włodarczyk-Fligier, L.A. Dobrzański, M. Kremzer, M. Adamiak, J. of Achievements in Mat. and Manufacturing Eng. 27, 99-102 (2008).Google Scholar

About the article

Published Online: 2016-10-17

Published in Print: 2016-09-01


Citation Information: Archives of Metallurgy and Materials, ISSN (Online) 2300-1909, DOI: https://doi.org/10.1515/amm-2016-0222.

Export Citation

© 2016 Polish Academy of Sciences. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License. BY-NC-ND 3.0

Comments (0)

Please log in or register to comment.
Log in