Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Archives of Mechanical Technology and Materials

1 Issue per year

Open Access
Online
ISSN
2450-9469
See all formats and pricing
More options …

Determination of emissivity coefficient of heat-resistant super alloys and cemented carbide

Piotr Kieruj / Damian Przestacki
  • Tadeusz Chwalczuk a a Poznan University of Technology, Piotrowo 3 Street, 60-965 Poznan, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Tadeusz Chwalczuk
Published Online: 2016-12-30 | DOI: https://doi.org/10.1515/amtm-2016-0006

Abstract

This paper presents the analysis of emissivity engineering materials according to temperature. Experiment is concerned on difficult to machine materials, which may be turned with laser assisting. Cylindrical samples made of nickel-based alloys Inconel 625, Inconel 718, Waspaloy and tungsten-carbides based on cobalt matrix were analyzed. The samples’ temperature in contact method was compared to the temperature measured by non-contact pyrometers. Based on this relative, the value of the emissivity coefficient was adjusted to the right indication of pyrometers.

Keywords: nickel alloys; emissivity coefficient; tungsten carbides

References

  • [1] Joshi A., Kansara N., Das S., Kuppan P., Venkatesan K., A Study of Temperature Distribution for Laser Assisted Machining of Ti-6Al-4V Alloy, Procedia Engineering 97 (2014) 1466 - 1473.CrossrefGoogle Scholar

  • [2] Kieruj P., Przestacki D., Polycrystalline diamond tool's wear during machining of cemented carbides produced by laser cladding, Advances in Manufacturing Science and Technology, Vol. 38, No. 4, 2014, p.61-70Google Scholar

  • [3] Madura H., Pomiary termowizyjne w praktyce, Agenda Wydawnicza PAKu, 2004.Google Scholar

  • [4] Anderson M., Patwa R., Shin Y.C., Laser-assisted machining of Inconel 718 with an economic analysis, International Journal of Machine Tools & Manufacture 46 (2006) 1879-1891.Google Scholar

  • [5] Przestacki D., Jankowiak M., Surface roughness analysis after laser assisted machining of hard to cut materials. Journal of Physics: Conference Series Volume 483 (2014) 012019, Published online: 28 March 2014Google Scholar

  • [6] Przestacki D., Sieniawski J., Stambolov G., Lisiak P., An overview of selective laser sintering strategies, Archives of Mechanical Technology and Automation Vol. 35, 2015, s. 1-10Google Scholar

  • [7] Przestacki D., Conventional and laser assisted machining of composite A359/20SiCp, Procedia CIRP Vol. 14, 2014, pp. 229 - 233Google Scholar

  • [8] Przestacki D., Jankowiak M., Mazur P., Wzorcowanie termometrów bezkontaktowych, Zeszyty Naukowe Politechniki Poznańskiej, nr 1, 2006.Google Scholar

  • [9] Venkatesan K., Ramanujam R., Kuppan P., Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718, Optics & Laser Technology 78 (2016) 10-18.Google Scholar

  • [10] Navas V.G., Arriola I., Gonzalo O., Leunda J., Mechanisms involved in the improvement of Inconel 718 machinability by laser assisted machining (LAM), International Journal of Machine Tools & Manufacture 74 (2013) 19-28.Web of ScienceGoogle Scholar

About the article

Received: 2016-05-10

Revised: 2016-05-31

Accepted: 2016-06-20

Published Online: 2016-12-30

Published in Print: 2016-12-01


Citation Information: Archives of Mechanical Technology and Materials, ISSN (Online) 2450-9469, DOI: https://doi.org/10.1515/amtm-2016-0006.

Export Citation

© 2017. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. BY-NC-ND 4.0

Comments (0)

Please log in or register to comment.
Log in