Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Archives of Mechanical Technology and Materials

1 Issue per year

Open Access
Online
ISSN
2450-9469
See all formats and pricing
More options …

Tribology of nitrided-coated steel-a review

Santosh V. Bhaskar
  • Corresponding author
  • Research Scholar, AVCOE, Sangamner and Associate Professor, Mechanical Engineering Department, Sanjivani College of Engineering, Kopargaon-423603, Savitribai Phule Pune University, MS, India
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Hari N. Kudal
  • Principal, S.N.D. College of Engineering and Research Center, Yeola-423401, Savitribai Phule Pune University, MS, Kopargaon, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2017-06-10 | DOI: https://doi.org/10.1515/amtm-2017-0008

Abstract

Surface engineering such as surface treatment, coating, and surface modification are employed to increase surface hardness, minimize adhesion, and hence, to reduce friction and improve resistance to wear. To have optimal tribological performance of Physical Vapor Deposition (PVD) hard coating to the substrate materials, pretreatment of the substrate materials is always advisable to avoid plastic deformation of the substrate, which may result in eventual coating failure. The surface treatment results in hardening of the substrate and increase in load support effect. Many approaches aim to improve the adhesion of the coatings onto the substrate and nitriding is the one of the best suitable options for the same. In addition to tribological properties, nitriding leads to improved corrosion resistance. Often corrosion resistance is better than that obtainable with other surface engineering processes such as hard-chrome and nickel plating. Ability of this layer to withstand thermal stresses gives stability which extends the surface life of tools and other components exposed to heat. Most importantly, the nitrogen picked-up by the diffusion layer increases the rotating-bending fatigue strength in components. The present article reviews mainly the tribological advancement of different nitrided-coated steels based on the types of coatings, structure, and the tribo-testing parameters, in recent years.

Keywords : Microhardness; Nitriding; PVD Coating; Tribology; Wear resistance

References

  • [1] Zeghni, A., Hashmi M., The effect of coating and nitriding onthe wear behaviour of tool steels, Journal of MaterialsProcessing Technology 155-156 (2004) 1918-1922. [2] Podgornik, B., Vizintin, J., Wanstrand, O., Larssons, M.,Hogmark, S., Ronkainen, H., Holmberg, K., Tribologicalproperties of plasma nitrided and hard coated AISI 4140 steel,Wear 249 (2001) 254-259. [3] Devaraju, A., Elaya Perumal, A., Alphonsa, J., Kailas, S.,Venugopal, S., Sliding wear behavior of plasma nitridedAustenitic Stainless Steel Type AISI 316LN in the temperaturerange from 25 to 400 oC at 10−4 bar, Wear 288 (2012) 17-26. [4] Nickel, J., Shuaib, A., Yilbas, B., Nizam, S., Evaluation of the wearof plasma-nitrided and TiN-coated HSS drills usingconventional and Micro-PIXE techniques, Wear 239 (2000)155-167. [5] Staia, M., Perez-Delgado, Y., Sanchez, C., Castro, A., Le Bourhis,E., Cabrera E., Hardness properties and high-temperature wearbehavior of nitrided AISI D2 tool steel prior and after PAPVDcoating, Wear 267 (2009) 1452-1461. [6] Yildiz, F., Yetim, A., Alsaran, A., Celik, A., Kaymaz, I., Frettingfatigue properties of plasma nitrided AISI 316L stainless steel:Experiments and finite element analysis, TribologyInternational 44 (2011) 1979-1986. [7] Yilbas, B., Nizam, S., Wear behavior of TiN coated AISI H11 andAISI M7 twist drills prior to plasma nitriding, Journal ofMaterials Processing Technology 105 (2000) 352-358. [8] Alpaslan, O., Atar, E., Cimenoglu, H., Tribological Behavior ofDuplex Treated AISI 4140 Steel, International Iron & SteelSymposium (2012) 264-268. [9] Holleck, H. Material Selection for Hard Coatings, Journal ofVacuum Science Technology (1986) 2661-2669. [10] Luo, D., Fridrici, V, Kapsa, P., A Systematic Approach for theSelection of Tribological Coatings, Wear 271 (2011) 2132-2143. [11] Zhang, J., Lu, L., Shiozawa, K., Zhou, W., Zhang, W., Effect ofnitrocarburizing and post-oxidation on fatigue behavior of35CrMo alloy steel in very high cycle fatigue regime,International Journal of Fatigue 33 (2011) 880-886. [12] Zhang, J., Lu, L., Shiozawa, K., Cui, G., Zhang, W., Fatigueproperties of oxynitrocarburized medium carbon railway axlesteel in very high cycle regime, International Journal of Fatigue32 (2010) 1805-1811. [13] Abdalla, A., Baggio-Scheid, V., Baptista, C., Barbosa, M., FatigueLife Changing in Rolled Carbon Steel after PlasmaThermochemical Treatments, Procedia Engineering 2 (2010)1653-1661. [14] VDI 3198:1992-08. Coating (CVD, PVD) of Cold Forging Tools.VDI-Verlag, (1991) Dusseldorf. [15] Vidakis, N., Antoniadis, A., & Bilalis, N. The VDI 3198indentation test evaluation of a reliable qualitative control forlayered compounds, Journal of Materials ProcessingTechnology 143-144 (2003) 481-485. [16] Bartkowska, A., Przestacki, D., Chwalczuk, T., Microstructure,phase composition and corrosion resistance of Ni2O3 coatingsproduced using laser alloying method, Archives of MechanicalTechnology and Materials 36 (2016) 23-29.Google Scholar

About the article

Received: 2016-09-24

Revised: 2017-04-29

Accepted: 2017-05-03

Published Online: 2017-06-10

Published in Print: 2017-01-26


Citation Information: Archives of Mechanical Technology and Materials, ISSN (Online) 2450-9469, DOI: https://doi.org/10.1515/amtm-2017-0008.

Export Citation

© 2017. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. BY-NC-ND 4.0

Comments (0)

Please log in or register to comment.
Log in