Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Archives of Mechanical Technology and Materials

1 Issue per year

Open Access
Online
ISSN
2450-9469
See all formats and pricing
More options …

Design of The Test Stand for Hydraulic Active Heave Compensation System

Arkadiusz Jakubowski / Arkadiusz Kubacki / Dominik Rybarczyk
Published Online: 2017-07-05 | DOI: https://doi.org/10.1515/amtm-2017-0012

Abstract

The article presented here described the design of a test stand for hydraulic active heave compensation system. The simulation of sea waves is realized by the use of hydraulic cylinder. A hydraulic motor is used for sea waves compensation. The hydraulic cylinder and the hydraulic motor are controlled by electrohydraulic servo valves. For the measurements Authors used displacement sensor and incremental encoder. Control algorithm is implemented on the PLC. The performed tests included hydraulic actuator and hydraulic motor step responses.

Keywords: Heave compensation; active heave; winch system; control systems; servo valve

References

  • [1] GalalRabie, M., Fluid Power Engineering, New York 2009.Google Scholar

  • [2] Hatleskog, J.T., Dunningan, M.W., Heave compensation simulation for noncontact operations on deep water, In: OCEANS 2006, September, 1-6.Google Scholar

  • [3] Korde, U.A., Active heave compensation on drill-ships in irregular waves, Ocean Engineering vol. 25, No. 7, (1998) 541 -561.CrossrefGoogle Scholar

  • [4] Messineo, S., Serrani, A., Offshore crane control based on adaptive external models, Automatica 45 (2009) 2546 - 2556.CrossrefGoogle Scholar

  • [5] Osiecki, A., Hydrostatyczny Napęd Maszyn, WNT, Warszawa 1998.Google Scholar

  • [6] Pizoń, A., Hydrauliczne i elektrohydrauliczne układy sterowania i regulacji, WNT, Warszawa 1987.Google Scholar

  • [7] Sagatun, S.I., Active control of underwater installation, IEEE Trans. Control Syst. Technol, 10 September, 743 - 748.Google Scholar

  • [8] Sarpkaya, T., Issacson, M., Mechanics of Waves Forces on Offshore Structures, Van Nostrand Reinhold, New York (1987) 354 - 366.Google Scholar

  • [9] Stryczek, S., Napęd Hydrostatyczny Tom I Elementy, WNT, Warszawa 1984.Google Scholar

  • [10] Woodacre, J.K., Bauer, R.J., Irani, R.A..A review of vertical motion heave compensation systems, Ocean Engineering, 104 (2015) 140 - 154.Google Scholar

About the article

Received: 2017-03-14

Revised: 2017-06-14

Accepted: 2017-06-22

Published Online: 2017-07-05

Published in Print: 2017-01-26


Citation Information: Archives of Mechanical Technology and Materials, ISSN (Online) 2450-9469, DOI: https://doi.org/10.1515/amtm-2017-0012.

Export Citation

© 2017. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. BY-NC-ND 4.0

Comments (0)

Please log in or register to comment.
Log in