Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Advanced Optical Technologies

Editor-in-Chief: Pfeffer, Michael


CiteScore 2018: 1.42

SCImago Journal Rank (SJR) 2018: 0.499
Source Normalized Impact per Paper (SNIP) 2018: 1.346

In co-publication with THOSS Media GmbH

Online
ISSN
2192-8584
See all formats and pricing
More options …
Volume 2, Issue 5-6

Issues

NIR cutoff filter for true color imaging sensors

Ralf Biertümpfel / Steffen Reichel
Published Online: 2013-10-05 | DOI: https://doi.org/10.1515/aot-2013-0037

Abstract

The function of a near-infrared (NIR) cutoff filter for imaging sensors is being described. The main purpose of the NIR cut filter is to obtain correct color recognition; therefore, the NIR filter is made of an absorbing filter glass and an interference coating. The absorbing filter glass is needed to minimize multiple reflections inside the lens system, which are the cause for ghost images. An additional interference coating enhances the function of the filter. Coating and filter glass are strongly dependent on each other. This requires high reproducibility and low tolerances of the filter glass and interference coating. In addition, features like inner quality – especially striae – and stability of the refractive index are important. A NIR cut filter may be designed as a flat plate or as a lens. Our analysis provides an estimation about striae level and variation of transmittance and their effect on image quality and color recognition. Furthermore, the use of an absorption filter glass as a lens (shrinking down the overall size) is discussed in terms of the influence on transmission and striae.

Keywords: absorption filter; color recognition; imaging sensor; lens; NIR cut filter; refractive index; striae; true color

References

  • [1]

    Commision Internationale de l’Eclairage: CIE15; 2004, 3rd ed. ISBN 3901906339.Google Scholar

  • [2]

    Eastman Kodak Comp.; Application Note: Color correction for image sensors; Revision3.0 MTD/PS-0534; August 13, 2008.Google Scholar

  • [3]

    Y. Choi, S. Jeong, S. Kim, ‘Lens system for ultra-small camera module and image forming lens with infrared filtering function used therefore’, US patent, Example described in table 7 and 8, US 2007/0024958 A1, 2007.Google Scholar

  • [4]

    Interference filter design software: OptiLayer Thin Film Software, OptiLayer Ltd. Alexander V. Tikhonravov, Michael K. Trubetskov; 2013, see http://www.optilayer.com/general.htm.

  • [5]

    SCHOTT optical filter glass calculation tool, SCHOTT AG, Mainz, Germany, 2013; see http://www.schott.com/advanced_optics/english/download/schott-filter-glass_2013.xlsx.

  • [6]

    G. Wyszecki, W.S. Stiles, Color Science: Concepts and Methods, Quantitative Data and Formula, 2nd ed. (Wiley-Interscience, July 28, 2000). ISBN 0-471-39918-3.Google Scholar

  • [7]

    See Standard ISO 10110 – part 4.PubMedGoogle Scholar

  • [8]

    E. Hecht, Optik (2. Auflage). (Oldenbourg Verlag, München, 1999).Google Scholar

  • [9]

    M. Born, E. Wolf, Principles of Optics, 7th ed. (Cambridge University Press, Cambridge, 1999).Google Scholar

  • [10]

    See Standard MIL-G-174B.Google Scholar

  • [11]

    S. Reichel, F.-T. Lentes, Blue glass lens elements used as IR cut filter in a camera design and the impact of inner quality onto lens performance, paper 8550-24, SPIE Proceedings Vol. 8550, SPIE Optical Systems Design, Barcelona, Spain, Nov. 2012.Google Scholar

  • [12]

    Optical design software Zemax, Radiant Zemax, see http://www.radiantzemax.com, 2013.

  • [13]

    D. Hill, How To Tolerance for Material Inhomogeneity. ZEMAX knowledge base, December 16, 2005, see http://kb-en.radiantzemax.com/Knowledgebase/.

About the article

Ralf Biertümpfel

Dr. Ralf Biertümpfel studied Mechanical and Aerospace Engineering at the Technical University of Darmstadt (Germany) and Cornell University (USA). After his diploma and his Master of Engineering in 1996, he worked on a research project in the field of heat transfer and thermodynamics and finally earned his doctorate at the Technical University of Darmstadt in 2001. Since 2001, he works at SCHOTT AG in the fields of hot forming of glass and precision optics. At present, he is the application manager for optical filters.

Steffen Reichel

Steffen Reichel studied Electrical Engineering at the University of Kaiserslautern and spend 7 months at the Michigan State University, Michigan, USA. After his diploma degree in 1996, he worked as a researcher at the University of Kaiserslautern working on his doctorate (Dr.-Ing.) in the field of optical communications (fiber optics, erbium-doped fiber amplifiers). In 1999, he joined Lucent Technologies working on fiber optical communications, erbium-doped, and Raman amplifiers. Since 2001, he works for SCHOTT on several fields of optics from imaging optics, fiber optics, waveguide optics, laser optics, illumination optics, and optical filters. He is a Senior Member of the IEEE and Member of the SPIE, and since 2013, he is a professor (honorary) for ‘Optics & Photonics’ at the University of Applied Science, Darmstadt, Germany. In addition, he is co-author in three books, has about 60 publications, and has 20 granted or applied patents.


Corresponding author: Ralf Biertümpfel, SCHOTT AG, Advanced Optics Hattenbergstr. 10, 55122 Mainz, Germany, e-mail:


Received: 2013-07-10

Accepted: 2013-09-02

Published Online: 2013-10-05

Published in Print: 2013-12-01


Citation Information: Advanced Optical Technologies, Volume 2, Issue 5-6, Pages 455–462, ISSN (Online) 2192-8584, ISSN (Print) 2192-8576, DOI: https://doi.org/10.1515/aot-2013-0037.

Export Citation

©2013 by THOSS Media & De Gruyter Berlin Boston.Get Permission

Comments (0)

Please log in or register to comment.
Log in