Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Biomedical Engineering / Biomedizinische Technik

Joint Journal of the German Society for Biomedical Engineering in VDE and the Austrian and Swiss Societies for Biomedical Engineering and the German Society of Biomaterials

Editor-in-Chief: Dössel, Olaf

Editorial Board: Augat, Peter / Habibović, Pamela / Haueisen, Jens / Jahnen-Dechent, Wilhelm / Jockenhoevel, Stefan / Knaup-Gregori, Petra / Lenarz, Thomas / Leonhardt, Steffen / Plank, Gernot / Radermacher, Klaus M. / Schkommodau, Erik / Stieglitz, Thomas / Boenick, Ulrich / Jaramaz, Branislav / Kraft, Marc / Lenthe, Harry / Lo, Benny / Mainardi, Luca / Micera, Silvestro / Penzel, Thomas / Robitzki, Andrea A. / Schaeffter, Tobias / Snedeker, Jess G. / Sörnmo, Leif / Sugano, Nobuhiko / Werner, Jürgen /

6 Issues per year


IMPACT FACTOR 2017: 1.096
5-year IMPACT FACTOR: 1.492

CiteScore 2017: 0.48

SCImago Journal Rank (SJR) 2017: 0.202
Source Normalized Impact per Paper (SNIP) 2017: 0.356

Online
ISSN
1862-278X
See all formats and pricing
More options …
Volume 60, Issue 6

Issues

Volume 57 (2012)

Biomechanic models and image guided interventions

Olaf Dössel
  • Corresponding author
  • Karlsruhe Institute of Technology (KIT)-Institute of Biomedical Engineering, Fritz-Haber-Weg 1, Karlsruhe 76131, Germany
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2015-11-21 | DOI: https://doi.org/10.1515/bmt-2015-0211

References

  • [1]

    Heinrich A, Teichgräber UK, Güttler FV. Measurement of susceptibility artifacts with histogram-based reference value on magnetic resonance images according to standard ASTM F2119. Biomed Eng-Biomed Tech 2015; 60: 541–549.Web of ScienceGoogle Scholar

  • [2]

    Karimi A, Razaghi R, Shojaei A, Navidbakhsh M. An experimental-nonlinear finite element study of a balloon expandable stent inside a realistic stenotic human coronary artery to investigate plaque and arterial wall injury. Biomed Eng-Biomed Tech 2015; 60: 593–602.Web of ScienceGoogle Scholar

  • [3]

    Korb W, Fricke C, Jacobs S, Falk V. An anthropomorphic sonography phantom for the evaluation of mechatronic devices for heart surgery. Biomed Eng-Biomed Tech 2015; 60: 557–566.Google Scholar

  • [4]

    Makowski MR, Jonczyk M, Streitparth F, et al. Interactive near-real-time high-resolution imaging for MR-guided lumbar interventions using ZOOM imaging in an open 1.0 Tesla MRI system – initial experience. Biomed Eng-Biomed Tech 2015; 60: 533–539.Web of ScienceGoogle Scholar

  • [5]

    Militz M, Uhde J, Christian G, Linke R, Morgenstern M, Hungerer S. FDG PET/CT dataset for navigation on femoral bone: a feasibility study. Biomed Eng-Biomed Tech 2015; 60: 551–555.Web of ScienceGoogle Scholar

  • [6]

    Mumme T, Friedrich MJ, Rode H, et al. Femoral cement extraction in revision total hip arthroplasty – an in vitro study comparing computer-assisted freehand-navigated cement removal to conventional cement extraction. Biomed Eng-Biomed Tech 2015; 60: 567–575.Google Scholar

  • [7]

    Rathke H, Hamm B, Guettler F, et al. Volume comparison of radiofrequency ablation at 3- and 5-cm target volumes for four different radiofrequency generators: MR volumetry in an open 1-T MRI system versus macroscopic measurement. Biomed Eng-Biomed Tech 2015; 60: 521–531.Web of ScienceGoogle Scholar

  • [8]

    Sifakakis I, Eliades T, Bourauel C. Residual stress analysis of fixed retainer wires after in vitro loading: can mastication-induced stresses produce an unfavorable effect? Biomed Eng-Biomed Tech 2015; 60: 617–622.Google Scholar

  • [9]

    Sofuoglu H, Cetin ME. An investigation on mechanical failure of hip joint using finite element method. Biomed Eng-Biomed Tech 2015; 60: 603–616.Web of ScienceGoogle Scholar

  • [10]

    Wang Y, Wu L, Guo H, et al. Computation of tooth axes of existent and missing teeth from 3D CT images. Biomed Eng-Biomed Tech 2015; 60: 623–632.Web of ScienceGoogle Scholar

  • [11]

    Wex C, Arndt S, Stoll A, Bruns C, Kupriyanova Y. Isotropic incompressible hyperelastic models for modelling the mechanical behaviour of biological tissues: a review. Biomed Eng-Biomed Tech 2015; 60: 577–592.Google Scholar

About the article

Corresponding author: Olaf Dössel, Karlsruhe Institute of Technology (KIT)-Institute of Biomedical Engineering, Fritz-Haber-Weg 1, Karlsruhe 76131, Germany, E-mail:


Published Online: 2015-11-21

Published in Print: 2015-12-01


Citation Information: Biomedical Engineering / Biomedizinische Technik, Volume 60, Issue 6, Pages 519–520, ISSN (Online) 1862-278X, ISSN (Print) 0013-5585, DOI: https://doi.org/10.1515/bmt-2015-0211.

Export Citation

©2015 by De Gruyter.Get Permission

Comments (0)

Please log in or register to comment.
Log in