Jump to ContentJump to Main Navigation
Show Summary Details
Weitere Optionen …

Current Directions in Biomedical Engineering

Joint Journal of the German Society for Biomedical Engineering in VDE and the Austrian and Swiss Societies for Biomedical Engineering

Editor-in-Chief: Dössel, Olaf

Wissenschaftlicher Beirat: Augat, Peter / Buzug, Thorsten M. / Haueisen, Jens / Jockenhoevel, Stefan / Knaup-Gregori, Petra / Kraft, Marc / Lenarz, Thomas / Leonhardt, Steffen / Malberg, Hagen / Penzel, Thomas / Plank, Gernot / Radermacher, Klaus M. / Schkommodau, Erik / Stieglitz, Thomas / Urban, Gerald A.


CiteScore 2018: 0.47

Source Normalized Impact per Paper (SNIP) 2018: 0.377

Open Access
Online
ISSN
2364-5504
Alle Formate und Preise
Weitere Optionen …

Comparison of the effectiveness of different antimicrobial surface technologies

Sebastian Buhl / Sebastian Käs / Alexander Stich / Sabine Gruber / Clemens Bulitta
Online erschienen: 07.09.2017 | DOI: https://doi.org/10.1515/cdbme-2017-0073

Abstract

The risk of infection via microbiologically contaminated surfaces has already been demonstrated by other publications. In this work two different antibacterial surface technologies transition metalloacids (AMiSTec) and TiO2/AgNO3 (Health Complete) were compared regarding feasibility as well as their advantages and disadvantages. The examination of the antimicrobial activity was assessed according to the JIS Z 2801. We could demonstrate that all of our tested samples showed a strong antimicrobial activity (>log 3 germ reduction) in the JIS experiments. Furthermore this strong antibacterial effect could be shown already after <30min incubation and at low light intensity (approx. 300 Lux) for the TiO2/AgNO3 samples. Both technologies provide a high potential for an improved infection control for example in a high risk environment like operation rooms or intensive care units.

Keywords: antimicrobial surface; infection control; infection

Artikelinformationen

Corresponding author: Prof. Dr. Clemens Bulitta: Technical University of Applied Science Amberg-Weiden, Hetzenrichter Weg 15, Germany, +49 (961) 382-1620, +49 (961) 382-2620


Online erschienen: 07.09.2017


Quellenangabe: Current Directions in Biomedical Engineering, Band 3, Heft 2, Seiten 355–357, ISSN (Online) 2364-5504, DOI: https://doi.org/10.1515/cdbme-2017-0073.

Zitat exportieren

©2017 Sebastian Buhl et al., published by De Gruyter. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. BY-NC-ND 4.0

Kommentare (0)