Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Open Chemistry

formerly Central European Journal of Chemistry


IMPACT FACTOR 2017: 1.425
5-year IMPACT FACTOR: 1.511

CiteScore 2017: 1.45

SCImago Journal Rank (SJR) 2017: 0.349
Source Normalized Impact per Paper (SNIP) 2017: 0.812

ICV 2017: 165.27

Open Access
Online
ISSN
2391-5420
See all formats and pricing
More options …
Volume 14, Issue 1

Issues

Volume 13 (2015)

Ion-exchange membranes in chemical synthesis – a review

Hanna Jaroszek
  • New Chemical Syntheses Institute, Inorganic Chemistry Division „IChN“ in Gliwice, Sowinskiego 11, PL 44-101 Gliwice, Poland
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Piotr Dydo
  • Corresponding author
  • Silesian University of Technology, Faculty of Chemistry, B. Krzywoustego 6,44-100 Gliwice, Poland
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2016-02-11 | DOI: https://doi.org/10.1515/chem-2016-0002

Abstract

The applicability of ion-exchange membranes (IEMs) in chemical synthesis was discussed based on the existing literature. At first, a brief description of properties and structures of commercially available ion-exchange membranes was provided. Then, the IEM-based synthesis methods reported in the literature were summarized, and areas of their application were discussed. The methods in question, namely: membrane electrolysis, electro-electrodialysis, electrodialysis metathesis, ion-substitution electrodialysis and electrodialysis with bipolar membrane, were found to be applicable for a number of organic and inorganic syntheses and acid/base production or recovery processes, which can be conducted in aqueous and non-aqueous solvents. The number and the quality of the scientific reports found indicate a great potential for IEMs in chemical synthesis.

Keywords: ion-exchange membrane; chemical synthesis; membrane electrolysis; electrodialysis

List of abbreviations

ED

electrodialysis

ME

Membrane electrolysis – AEM or CEM in 2-chamber stack (electrode reaction matters)

EED

Electro-electrodialysis – both AEM and CEM in 3-chamber stack (electrode reaction matters)

ED-M

Electrodialysis metathesis – 4-chamber repetitive unit

ISED

Ion substitution electrodialysis – modification of ED-M with two adjacent CEM or two AEM membranes

BMED

electrodialysis with bipolar membrane

EDI

electrodeionization

IEM

ion exchange membrane

AEM

anion exchange membrane

CEM

cation exchange membrane

BPM

bipolar membrane

CE

current efficiency

SPE

solid phase electrolyte

Introduction

Ion exchange membranes are the most commonly used for electrodialytic desalination of brackish and seawaters and for NaCl recovery [1]. In ordinary electrodialysis (ED), ion exchange membranes (IEMs) are organized alternatively to form a stack in which, under applied electric current, a transport of ions toward electrodes occurs with restriction by semi-permeable membranes in the adjacent compartments. As a result, the diluate (an ion-depleted solution, e.g. drinking water) and the concentrate are formed. However, ion-exchange membranes constitute a promising tool which, when used properly, can be applied in the synthesis of ionic compounds used in chemical and other industries. An interest in application of electrodialysis for chemical synthesis has grown, recently, which has resulted in an increasing number of scientific papers. The intention of this review is to provide a summary on the applicability of ion-exchange membranes and the prospects of electrodialysis-based processes in chemical synthesis.

2 Ion-exchange membranes

The most widely used IEMs consist of polymeric resins with attached, charged, functional groups [2,3]. Based on their selectivity, membranes are referred to as anion-exchange (AEM) and cation-exchange (CEM) membranes. AEMs contain positively charged functional groups, and thus by Donnan exclusion [1,2], retain cations and allow for the passage of anions, only. CEMs, in contrast, have negatively charged functional groups; thus, they reject anions and allow for the passage of cations only. IEMs can be either homogeneous or heterogeneous. Heterogeneous membranes, made from powdered ion-exchange resins and a binder, are thicker and more robust than homogeneous, but with the cost of higher specific resistance and lower permselectivity [2]. Homogeneous membranes, made mostly via in-situ polymerization or grafting, are currently the most widely used. Typical polymeric resins for traditional IEMs are styrene and divinylbenzene. Insufficient thermal and chemical stability of hydrocarbon membranes, especially in the presence of strong oxidizers, gave rise to perfluorinated CEM membranes, consisting of fluoropolymer with multiple strong carbon–fluorine bonds for the chlor-alkali industry [4,5]. No such high-performance AEMs were developed, however. AEMs have generally lower permselectivity than CEMs which, when combined with the restrictions posed by the nature of their ionic groups (mostly quaternary ammonium), limits the applicability of IEMs in many membrane synthesis processes, especially when acids are involved. Maximum concentration of acid is limited by a so-called proton leakage; the rate of which increases rapidly with an increase in acid (proton) concentration on the anode side of either AEM or bipolar membrane [2,6]. Currently, commercial AEMs with reduced proton leakage are produced, but for more concentrated strong acids, the efficiency of proton exclusion is still insufficient and severe leakage is reported [2,3,7].

Also, inorganic ion-exchange membranes or hybrid inorganic-organic monopolar membranes were prepared and are under investigation [3]. However, these membranes are not commercially available to date and, thus, are of less significance for chemical synthesis, despite possible advantages: the possibility of process-tailoring and high mechanical strength and chemical resistance.

Bipolar membrane (BPM) has the unique property of generation of hydroxyl ions and protons, particularly useful in the synthesis of acids and/or bases. BPM is a composite membrane consisting of a cation-exchange layer and an anion-exchange layer with a thin intermediate layer between them [2]. Dissociation of water in the intermediate layer is accelerated (even up to 7 orders of magnitude compared to the rate of water dissociation in aqueous solutions [8]) both by electric field and transport of ions from the intermediate layer through IEM layers towards the corresponding electrodes. Also, a weak acid or base catalyst can be used in the intermediate layer to further enhance the water splitting effect. Ideal BPM should be non-permeable for salt ions. However, for all commercial BPMs, the salt ion fluxes result in the contamination of the products in compartments adjacent to BPM, especially at high concentrations [911].

The above-presented IEMs can be applied in chemical syntheses for either separation of the ionic product from the reaction mixture, ion introduction (or replacement) due to the formation of a desired product (in the case of monopolar membranes) or to generate hydrogen (H+) or hydroxyl (OH-) ions (BPM) for the synthesis of acids or bases as discussed in the following chapter.

3 Ion-exchange membrane based processes

Membrane techniques are distinguished by stack configurations and sometimes by the type of the membrane used. Since in literature there is some confusion on nomenclature of variants of electrodialysis, in this work, we provide a short description of each ED process/configuration together with a schematic representation of the stack. All the relevant details on applications of these processes are given in Section 4.

3.1 Membrane electrolysis

The simplest electro-membrane process, membrane electrolysis (ME), evolved directly from electrolysis in which a diaphragm was replaced by IEM. There, in a two-compartment stack, ME combines the permselective ion transport through an IEM and electrochemical reactions at electrodes (Fig. 1). Either AEMs or CEMs can be used (Fig. 1a or 1b respectively). Water electrolysis or other redox reactions at the electrodes, allows for electron exchange and provides ions to be selectively transported in the generation of products.

Schematic representation of membrane electrolysis with anion-exchange membrane (a) or cation-exchange membrane (b).
Figure 1

Schematic representation of membrane electrolysis with anion-exchange membrane (a) or cation-exchange membrane (b).

In membrane electrolysis, each membrane stack can consist of only two compartments and two electrodes. Depending on the electrode material, this can add up to high capital cost of the process. Also, membranes placed near electrodes are exposed to harsh conditions (strong bases, strong acids, oxidizing atmosphere) and have to be chemically resistant. This poses certain limitations in the use of AEMs [12]; however, sufficiently chemically resistant, perfluorinated CEMs are already being applied. Concentration and purity of ME products is limited by permselectivity and chemical resistance of IEMs used and by water transport. Concentration of acid is limited by proton leakage through the AEM. ME is an efficient solution for base synthesis or when only acid or only base recovered from salt is necessary to be obtained with high purity.

3.2 Electro-electrodialysis

Electro-electrodialysis (EED) is a transitory process between ME and electrodialysis. In a three-compartment stack, salt solution is introduced to the compartment at the center, where cations are transported through the CEM towards the cathode and anions through AEM towards the anode resulting in depletion of the salt solution (Fig. 2a). In catholyte and anolyte, water electrolysis provides ions for formation of base and acid, respectively. In some variants, an additional CEM is placed to separate the anolyte compartment and reduce proton leakage (Fig. 2b).

Schematic representation of electro-electrodialysis systems.
Figure 2

Schematic representation of electro-electrodialysis systems.

An EED stack consists of one triplet of compartments, which increases capacity cost similar to ME. Depletion of salt solution increases the stack voltage and, thus, the operational cost. The concentration of products is limited by water transport, chemical resistance of IEMs and by proton leakage. Significant proton leakage results in acidification of the salt compartment, thus a decreased CE of the base – instead of metal, hydrogen ions are transported through CEMs and water is produced in catholyte [13,14]. Purity of the products can be very high as contaminating ions are removed from the process solutions by electro-migration (electrostatic field). All of the above, makes EED an efficient process designed for the splitting of salt to recover/produce, simultaneously, its corresponding acid and base with high purity.

3.3 Bipolar membrane electrodialysis

Bipolar membrane electrodialysis (BMED) is a membrane technique distinguished by the application of BPM used in place of electrodes to generate hydroxyl ions and protons. In BMED, BPM is stacked together with monopolar IEMs into a membrane module, and the possible configurations depend on application. A three-compartment stack (Fig. 3a), with both AEMs and CEMs, is used for the treatment of relatively concentrated salt solutions which splits them into the corresponding acids and bases, analogously to EED. A two-compartment cell is used mostly for acid or base regeneration. This configuration can be used together with a CEM for acidification (Fig. 3b) or with an AEM for alkalization (Fig. 3c) of a salt stream. The configuration with two monopolar membranes allows for an increase in the ratio of acid (and base) to the product salt as the outlet of the compartment adjacent to BPM is recycled again into the compartment next to the BPM (Fig. 3d, 3e) [1517]. It should be noted, however, that not all possible stack configurations are currently commercially available.

Schematic representation of bipolar membrane electrodialysis in a three-compartment (a), two-compartment (b, c) and high conversion (d, e) configuration.
Figure 3

Schematic representation of bipolar membrane electrodialysis in a three-compartment (a), two-compartment (b, c) and high conversion (d, e) configuration.

The selectivity of the BMED strongly depends on concentrations of salt, acid and base. This adds up to restraints inherent in the performance of monopolar membranes themselves (proton leakage, water transport). BPM restricts solution composition: multivalent metal ions should be removed from solutions prior to BMED, as their transport (leakage) through the anionic side of BPM results in hydroxide participation and damage of the membrane [2]. Concentration of products is limited, mostly, by permselectivity of monopolar membranes, leakage through BPM membrane and chemical stability of membranes (especially against bases) [2,16]. The major limitation for BMED production of strong acid/base lies in the possibility of obtaining concentrated solutions. When BMED is applied for production of strong acids, maximum concentration is about 1–2 M due to insufficient selectivity of the BPM and monopolar membranes. Whereas, for mostly organic, weak acids, the main process limitation lies in low conductivity of the process solutions, but quite concentrated (up to 6 M) product solutions are obtained [18]. Moreover, in a three-compartment configuration, the desalination degree cannot be too high – at low concentrations, the stack voltage increases due to electric resistance of the electrolyte solution.

In comparison to the previously described electrolysis-derived membrane processes, BMED is more efficient in terms of energy consumption. Energy requirement is theoretically about 40% of that of water electrolysis with gas evolution [14], and the stack can be built up from repeating units. The latter also decreases unit costs; however, operational costs are increased by the necessity for periodic replacement of costly BPM membrane. The efficiency of hydroxyl ion and proton generation is limited by BPM performance [19]. The amount of gaseous byproducts (H2, O2) is significantly reduced, as those are not formed in BPM. The salt leakage through BPM leads to contamination of acid/base with salt ions (estimated at 5% [20,21]). In conclusion, BMED is an effective process designed for salt splitting and weak acid/base recovery. Economically, the most interesting applications of BMED are integrated processes with simultaneous acid/base production [16].

3.4 Metathesis-electrodialysis

The double exchange (metathesis) reactions can be conducted with proper configuration of monopolar membranes. In metathesis-electrodialysis (ED-M), AEMs and CEMs are alternatively placed between two electrodes which enables metathesis reactions in a four-compartment stack configuration (Fig. 4). With two different feeds (diluates), by migration of ions toward corresponding electrodes limited by IEMs, two different products (concentrates) are obtained.

Schematic representation of metathesis-electrodialysis.
Figure 4

Schematic representation of metathesis-electrodialysis.

Contrary to classic metathesis, ED-M is not an equilibrium process, and, thus, avoids the necessity for separation and removal of well-soluble contaminants from batch and formation of double salts at the salt crystallization stage. Also, the range of possible substrates for synthesis by double-exchange is broadened. The disadvantage is a relatively low concentration of product solutions, as salt crystallization in the module will lead to damage of IEMs. To obtain product in the solid form, subsequent evaporative crystallization is needed, thus, ED-M is more suitable for products that can be stored and transported in the form of a concentrated solution, e.g. for a further synthesis step. The rate of product formation can be controlled by applied current density which makes ED-M a safe route of synthesis. Concentration of products is limited by the rate of water transport, and product purity is limited by permselectivity of membranes and back diffusion, analogously to ED [22,23]. ED-M has the potential to be an energy and cost-effective intermediate synthesis step and reevaluation tool for highly soluble ionic compounds.

3.5 Ion substitution electrodialysis

In ion substitution electrodialysis (ISED), the stack works as the ion exchanger. Instead of a strictly alternative arrangement of IEMs, pairs of one type of monopolar membrane are usedand separated by one IEM of opposite sign (Fig. 5a and 5b). Under an applied electric current, ions from donor solution (D) are transported to adjacent product; while ions from product are transported to an acceptor solution (A). Thus, ions in the product stream are substituted and donor solution salinity gets reduced during the course of the process. This arrangement is used mostly for wine deacidifiction in the food industry [24], which is not discussed in this work.

Schematic representation of two possible configurations of ion substitution electrodialysis. A-acceptor solution, D – donor solution.
Figure 5

Schematic representation of two possible configurations of ion substitution electrodialysis. A-acceptor solution, D – donor solution.

Inorganic acids or bases are usually used as donor solutions [24]. In this case, initially high current efficiency, due to the high rate of diffusion, of products formed, decreases with increasing content of an acid in the product. Highly-mobile H+ ions compete with metal cations transported to the acceptor solution; thus, the obtained product cannot be completely acid-free. This competition can be reduced in some cases by the use of monovalent-selective IEMs.

3.6 Donnan dialysis

Donnan dialysis (DD) is a no-electric current, diffusion-driven process, that can be also applied for continuous ion exchange when ionic radii of one of the ions is too large to be effectively transported through IEM. In this case, only comparably small anions are transported through AEM (Fig. 6a) or cations through CEM (Fig. 6b), leading to the substitution of ions. In this process energy consumption is low; it can lead to pure products (even > 99% [25]), However, it is time consuming, requires enormous membrane area that increases unit costs and its application in chemical synthesis is very limited.

Schematic representation of Donnan dialysis.
Figure 6

Schematic representation of Donnan dialysis.

4 Applications of IEMs in chemical synthesis

4.1 Electromembrane synthesis by ME

IEMs in chlor-alkali industry

The oldest and most widespread application of membrane processes for synthesis lies in the chlor-alkali industry, where IEMs are used for simultaneous production of Cl2 and alkali (NaOH or, to lesser extent, KOH) by electrolysis of aqueous, alkaline earth metal chloride solutions. The conventional process encountered two major obstacles: explosive reaction of chlorine with hydrogen and dissolution of chlorine in NaOH to form a hypochlorite solution. To overcome these issues, three technologies were developed which differ in the method of keeping the chlorine produced at the anode separated from the caustic soda and hydrogen produced at the cathode: mercury, diaphragm and membrane cell electrolysis [26]. The latter, introduced in the 1970s, is considered to be the Best Available Technology due to ecological advantages and energy efficiency [27].

In membrane cell electrolysis, the anode and cathode are separated by a CEM. Brine is introduced to the anode compartment where chloride ions are oxidized to chlorine gas. Sodium ions migrate through the CEM toward the cathode compartment where water is electrolyzed, releasing hydrogen gas and hydroxide ions. Sodium and hydroxide ions combine to produce caustic soda solution which is concentrated by recirculation to 32−35% by mass. NaOH is continuously removed from the catholyte. CEM prevents the migration of chloride ions from brine to the cathode compartment, thus, ensuring high purity of the product (< 50 ppm NaCl). Depleted brine is discharged from the anode compartment. Further saturation of alkali to the commercial standard concentration of 50% is done by evaporation. Back-migration of hydroxide due to non-ideal permselectivity of CEM leads to an undesired formation of oxygen, hypochlorite and chlorate in the anode compartment, but the loss of CE does not typically exceed 3–7% with respect to caustic soda production [26].

The first CEMs suitable for membrane electrolysis were proposed by Ionics Inc. in the 1950s. Such a membrane should have high exchange capacity, high electrical conductivity, and stability in the presence of both chlorine and concentrated alkali at elevated temperatures. Suitable chemical stability was impossible to obtain with hydrocarbon polymers, and it took almost twenty years until fluorocarbon membranes with sulphonic groups were developed by E.I. du Pont Co. (Nafion), followed by Asahi Glass (Flemion) [28]. Currently, perfluorinated CEMs used are composite membranes consisting of at least two layers of perfluorinated polymer. The carboxylate layer (adjacent to the cathodic side) with low water content ensures selective transport of sodium or potassium ions and largely prevents the transport of hydroxide, chloride, hypochlorite, and chlorate ions; while the sulphonate layer (adjacent to the anodic side) ensures good mechanical strength and a high ionic conductivity [4,16]. Reinforcement with PTFE fibers gave the membrane additional mechanical strength. A comprehensive literature review on Nafion structure and properties was done by Mauritz and Moore [5]. The lifetime of chlor-alkali membranes is most commonly reported as three years, but ranges between 2−5 years [27].

To avoid further evaporative concentration of caustic solutions, Fx-50 membrane was developed by Asahi Glass for direct production of 50% caustic soda, but due to the low conductivity of the modified membrane, the market demand for this product was too low for its successful commercial application [29,30].

To maintain the high performance and lifetime of the IEM, the feed brine must be purified from undesirable components (sulfates, calcium, magnesium and other multivalent metal ions, which hydroxides can precipitate inside the membrane) in an additional purification step, which increases operational cost [31].

Despite those two drawbacks: additional brine purification and following caustics concentration, membrane technology proves it usefulness in the chlor-alkali industry and is advantageous compared to the other two technologies. This can be proven by the fact that almost all chlor-alkali plants built after 1987 are based on membrane electrolysis [27].

IEMs in alkaline water electrolysis

Alkaline water electrolysis is currently the only industrial applied technology for water electrolysis. Alkaline solutions, KOH or NaOH, are circulated through catholyte and anolyte chambers where the decomposition of water and simultaneous production of very pure hydrogen and oxygen occurs [32]. A diaphragm is essential to separate gases produced in the electrode compartments to prevent an explosive reaction. Such a diaphragm can be replaced with IEM, either CEM or AEM. With the use of perfluorinated CEM, NaOH can be produced as a byproduct in the catholyte, similar to the chlor-alkali industry; however the energy efficiency of this process is low [33]. The use of AEM could improve the process flexibility and efficiency. However, such membrane is subject to operate at elevated temperatures (about 80°C) and with concentrated alkali solutions, conditions that none of the commercially available products can handle [12,34].

Perfluorinated membranes are also used as solid polymer electrolytes in proton exchange membrane (PEM) water electrolysis (also named solid polymer electrolysis, SPE). The membrane there is responsible for the transport of protons to the cathode compartment, separation of electrode chambers and separation of gaseous products. This promising technology, despite high energy efficiency, struggles with a short lifetime and high unit costs due to the high membrane price [32].

IEMs as a replacement for diaphragms in various electro-membrane syntheses

In electro-synthesis of various compounds, replacement of diaphragms with IEMs increases the process efficiency. CEM was used for the production of potassium stannate in a process in which soluble tin anode dissolves in KOH electrolyte to form stannite which reacts rapidly with air to form stannate. CEM enables transport of K+ ions from anolyte to catholyte where KOH is formed and later recirculated to anolyte, providing KOH for reaction [35,36]. The bleaching agent, sodium dithionite (Na2S2O4), can be obtained by electro-membrane reduction of bisulfate ion [37]. Chlorine-free chlorine dioxide can be produced in a single step by ME of a diluted alkali metal chlorite solution [38]. In electro-oxidation of cerium(III) sulfate to cerium(IV) at the anode, AEM separates products and allows SO42- transport from the cathode compartment to balance charges [39].

ME has also been successfully used to increase the concentration of hydroiodic acid by combining the redox reactions in the iodine-iodide system and directed proton permeation through perfluorinated CEMs [4043]. As a result of ME concentration, HI content in the catholyte increased to over the quasi-azeotropic level (about 10 mol kg-1), while its anolyte content decreased. This method of concentrating HI can be applied to increase the efficiency of the sulfur-iodine process.

A variety of organic electrochemical processes have been developed which require IEM for separation of electrode solutions. In electrohydrodimerization of acrylonitrile into adiponitrile (an important intermediate in the production of Nylon-66) by electrolysis, CEM prevents the oxidation of organic compounds present in the catholyte both by separating them from the oxygen released at the cathode and providing proton transport to the anolyte [44]. Sodium methanolate can be produced either by ME of NaCl [45] or sodium acetate [46] in methanol solutions. In both cases, electroosmotic solvent flux limits product concentration. ME with CEM also enables synthesis of benzoquinone and hydroquinone [47], thus, obtaining trimethylhydroquinone from mesitylene [48] and p-anisidine by reduction of nitrobenzene in acidic methanol [49]. Replacement of porous separators with CEMs also prevented the migration of oxalate and glyoxalate anions to the anode and enabled a quantitative reduction of oxalic acid to glyoxalic acid [50]. The use of AEM in the above process prevented a migration of cations to contaminate the anolyte and allowed maintenance of the constant chloride concentration in the anodic compartment [51]. In anodic methoxylation of the methanol solution of olefins, yield strongly depended on the olefin structure [52]. Some attempts were also made at anodic dimethoxylation of furan [53], electroreduction of dibromo compounds [54], and methanol or p-xylene oxidation [55].

In most of the syntheses by ME, a membrane separates the product from an electrode at which undesired side reactions (oxidation/reduction) can possibly take place. In ME, applied electrical potential allows for control of the reaction rate, which is supported by the use of IEM. Also, the purity of product is often an advantage. The main limitation in the application of ME for organic syntheses in non-aqueous systems lies in a poor conductivity of the process solutions which implies the use of supporting electrolytes (i.e. KCl), which need to be removed in the subsequent steps.

IEMs as solid polymer electrolytes in electro-organic synthesis

In electrolytic oxidation or reduction of organic compounds by ME, the use of a supporting electrolyte is often essential to provide sufficient electrical conductivity in a module. This can be omitted with great improvement of the process by the use of a so-called solid phase electrolyte (SPE) where IEM directly contacts porous electrodes, replacing conductive fluid containing the supporting electrolyte. Thus, SPE allows elimination of the subsequent separation and recycling of a supporting electrolyte and the suppression of side reactions with such additives [5658]. This is a significant improvement in organic synthesis while retaining its advantages of simplicity, low energy demand, moderate temperatures and pressures and ease of the process control. SPE synthesis products contain no contaminants and can be used as food or pharmaceutical grade reagents [57,58].

The electrochemical reactions take place at the interfaces between the IEM and electrocatalytically active layers of porous electrodes. IEM itself plays the role of the ED compartment filled with electrolyte, thus providing the necessary ionic conductivity. Using the above strategy, a number of fuel cell technologies were developed on the base of oxidation of alcohol using SPE [59,60].

AEM is rarely used as SPE, as this type of IEM is still not robust enough, especially in the presence of oxidants [61]. In AEM, positively charged fixed ions, such as quaternary ammonium groups, act as charge carriers for OH- ions formed at the cathode, which can be oxidized into oxygen at the anode. The most widely used SPEs are CEMs, which act like immobilized sulfuric acid due to the fixed sulfonate allowing migration of H+ ions formed at the anode to the cathode compartment, where hydrogen ions are reduced to hydrogen.

Ogumi and co-workers published a series of articles on the application of the SPE technique in organic electrosynthesis, eg. for hydrogenation of olefinic double bonds [62], Kolbe type reactions [63], oxidation of cyclohexanol to cyclohexanone [64], reduction of nitrobenzene [65,66] or oxidation of geraniol [67]. Jörissen investigated the application of SPE for electrooxidation of alcohols to acids, methoxylation of furane, alkoxylation of N-alkyl amides [57], and methoxlation of p-methoxytoluene [68]. Pintauro et al. studied the hydrogenation of edible oils [69,70]. It should be also mentioned that with SPEs the following syntheses were investigated: reduction of benzaldehyde [71], reduction of 2-cyclohexene-1-one [72], the electrosynthesis of p-methoxybenzaldehyde using a graphite SPE electrode [73], the oxidation of various alcohols [74], electrohydrogenation of ethylene [75].

4.2 Synthesis of ionic liquids

Ionic liquids are organic salts of great interest, recently, due to their unique properties as solvents, but the synthesis, especially of hydrophilic ionic liquids, encounters some problems. Application of ED-M allows avoiding the use of expensive silver salts used in conventional syntheses and is more environmentally friendly than the use of organic solvents [76]. Moreover, the modular construction, and its related ability to scale up the ED offers the potential to produce large amounts of ionic liquid in a relatively straightforward process [77]. Choline ionic liquids: thiocyanate, acetate and dicyanamide were successfully prepared by electrodialysis from the inexpensive precursor choline chloride with an overall CE of 65-80%, increasing with the decrease in ion size [76]. However, purity of the product was lower than in conventional methods, and the recovery ratio was low due to water transport. 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4) was synthesized by ED-M of [BMIM]Cl with NaBF4 with a 92% yield ratio and purity over 95% [78].

BMED was also applied for synthesis of ionic liquids: to produce hydroxide precursors of the common cation 1-ethyl-3-methylimidazolium (EMIM) from [EMIM][EtOSO3][77]. A 5% solution of precursor obtained contained ultralow levels of residual anions.

Relatively small ions (like BF4- or choline) are effectively transported through the AEM in the electrical field, thus it is possible to produce these compounds effectively by ED-M. For large and hydrophobic organic ions, often constituting ionic liquids, the transport through IEMs is limited or even prevented. These ions can also cause fouling of IEMs [79]. In a synthesis route, when simple small inorganic ions are to be removed from the reaction mixture to obtain ionic liquids, the use of simple ED seems to be advantageous over other membrane processes since the rates of the transport of large organic ions through IEMs are going to be low due to the steric hindrance effects [80] or low diffusivity.

When one of the ions to be replaced to form ionic liquid is small, Donnan dialysis can be also applied. DD was successfully applied to purify ionic liquids from halides in the following mixtures: NaCl/NaAc, EMIM Cl/NaAc, EMIM Cl/NaOH, TBP Br/NaOH, TMSBr/NaOH and TMACl/NaOH [25]. Acetate and hydroxide ions were used as comparable in size; the latter was subsequently neutralized with glycine to prepare glycinate ionic liquid. A high degree of conversion and low content of cationic impurities in the product has proven the applicability of DD in the synthesis of ionic liquids.

4.3 Conversion of inorganic salts

Conversion of some inorganic salts to more useful products can be conducted by metathesis-electrodialysis (ED-M). Sodium sulfate was converted to sodium chloride by a double exchange reaction with either magnesium [81] or potassium [82] chlorides. In another work, potassium bicarbonate was prepared from sodium bicarbonate and potassium sulfate [83]. Production of KNO3 from various substrates has recently gained some interest [84,85]. The aforementioned processes were characterized by high product current efficiency (close to 100%) and high purity. The concentration of products was, however, limited by inevitable water transport, caused mostly by electroosmosis [81,82]. Purity of product is crucial for the application of final product and depends mostly on selectivity of membranes and composition of raw materials [22,23]. The main advantage of applying ED-M to synthesis or conversion of inorganic salts is its non-equilibrium character which allows for using substrates that will lead to the co-precipitation of undesired products or formation of double salts when components are simply mixed together, as in conventional metathesis. However, for reactions where all of the components are highly soluble, ED-M has to be followed by evaporation or crystallization to separate the final product.

4.4 Controlled synthesis of energetic compounds

ED-M can also be considered as a safe method for the continuous synthesis of sensible (energetic, explosive) compounds, as it allows one to control the rate of synthesis via electric potential applied. Recently, synthesis of energetic compound: 2,2-dimethyltriazanium azide from sodium azide and 2,2-dimethyltriazanium sulfate by ED-M was first reported [86]. Such application is favorable when a reactive compound can remain in a solution, i.e. when used as a precursor or an intermediate for the subsequent synthesis steps.

4.5 Synthesis of quaternary ammonium hydroxides

Membrane techniques are applied to the synthesis of quaternary ammonium hydroxides, used as a phase transfer catalyst or template for nanoparticle preparation. Membrane electrolysis with CEMs is found to be more applicable for synthesis of lower molecular weight compounds [87] while AEMs allow for the formation of high molecular weight compounds [88,89]. Synthesis by BMED surpasses membrane electrolysis in terms of purity of the product [90,91,92], however, process performance decreases with an increase in the halide salt molecular weight [90]. Both membrane techniques provide lower energy consumption than traditional methods of quaternary ammonium hydroxide synthesis.

4.6 Synthesis in non-aqueous solvents

The BPM placed in alcohol solution can cause alcohol to split into alkoxide anions and a proton (H+). This was initially reported by Sridhar [93]: sodium methoxide was synthesized from methanol solution of sodium acetate, according to the overall reaction:

CH3COONa + CH3OH → CH3ONa + CH3COOH

BMED was also adopted to introduce alkoxyl groups to the compounds. This process is particularly significant as it provides cheap chemicals for various syntheses, such as the Claisen condensation and the intramolecular Dieckmann condensation reactions [94]. In synthesis of acetoacetic ester, both steps of condensation and protonation can be carried out in a single ED step, with the alkoxide produced at the membrane immediately converted to the sodium enolate, and sodium ion recycled and conserved inside the system [94]. Methyl methoxyacetate, an important intermediate product, was produced by BMED in methanol, with LiNO3 as a supporting electrolyte and methyl chloroacetate as a raw material [95]. Alkoxide was produced with a CE of around 60–70%; however, the following reaction steps showed rather low yields: 15% for methoxyacetate and 23% for ester.

It should be emphasized that in all the abovementioned cases, conventional IEMs, designed for aqueous solutions, were used and optimal conditions for non-aqueous systems are still to be determined.

4.7 Inorganic acid and base production and recovery

Production of inorganic acid and bases and/or their recovery from salts, can be done with ion-exchange membranes with various configurations and techniques. Recovered acid and base can be recycled or reused. For re-use in the same process, the purity of recovered acid and/or base does not have to be high, which remains an additional advantage.

Membrane electrolysis was used for recovery of acids from various sodium or potassium oxo-salts. Acid production efficiency increased in the following order: HNO 3> HCl > H2SO4 [96,97]. ME was also used to recover NaOH from sodium sulfate [98] and to recover chromic acid from spent chromic/sulfuric acid etch baths [99,100]. In the latter case, however, presence of oxidative chromic acid solution significantly decreased AEM lifetime and EED was proposed as a better solution [101]. In EED, CrO42- is transported through AEM to the anolyte, where chromic acid is recovered [99,102]. Diluted sulfuric acid may be introduced to the catholyte to prevent precipitation of metal hydroxides and CEM blockage [99,103]. EED was also successfully applied for the splitting of alkali sulfates into sulfuric acid and a hydroxide [13,14,104], NaCl into HCl and NaOH [105], conversion of ammonium nitrate from wastewaters into ammonia and nitric acid [106108], and regeneration of NaOH from spent caustics [130]. Ceramic membranes were proposed for salt splitting of radioactively contaminated sodium salt solutions [109]. To improve CE of the acid/base recovery process, deposition of a sodium-ion selective ceramic thin film on a polymeric cation-selective membrane was proposed [110].

Among membrane methods for inorganic acid recovery, BMED got the most attention. This process is favored for treatment of spent acidic solutions containing metal salts (such as metal pickling liquors) without any waste disposal needed as it produces both hydroxide for metal precipitation and regenerated acid to recirculate to the process [111113]. BMED was also applied for the splitting of sodium sulfate [114,115117], sodium chloride [9,118121], sodium chlorate [122,123], sodium nitrate [124], sodium and potassium iodide salts [125], KF in the production of uranium fluoride [126] to treat nitrate wastewaters [127,128], spent caustics to regenerate NaOH [129,130] and to produce silica acid from sodium metasilicate [131]. However, despite lower energy requirements reported, BMED still possesses many of the disadvantages of EED/EM [132]. High purity acid and base at higher concentrations can be obtained rather by EED, although at the expense of higher cell voltage and energy consumption [10,20,130,133]. The concentration of strong acid obtained with IEMs is generally said to be limited to 2 M [105,127] due to proton leakage, however, with so-called “low proton leakage” membranes and careful stack configuration up to 6−8 M, nitric acid was produced by EED with good current efficiency [106]. BMED is more suitable for treatment of solutions with low salt concentration due to the relatively large ion leakage through BPMs resulting in the contamination of the acids or bases produced with salts [134]. To overcome the above limitations, a configuration with two adjacent monopolar membranes of the same type was proposed (Fig. 3d, 3e).

4.8 Organic acid and bases production and recovery

Organic acids have been widely used in foods, beverages, pharmaceuticals, plastics and other biochemical or chemical products [135]. In microbiological syntheses, final product is received in the form of organic salt and acids have to be subsequently recovered from fermentation broth. Purification stages can comprise up to 50% of production costs and generate large amounts of wastes (mostly gypsum); therefore, there is a great interest in the application of membrane processes to improve the process economy [136].

Microbiological organic acid production can be done in one reactor with BMED, coupling the removal of product and pH control (by formation of side-product hydroxide) – the two crucial factors limiting commercial applications [137,138]. However, due to fouling of the membranes by bacteria [139,140], a more favorable solution is coupling conventional ED for salt concentration in the brine and removal of non-ionic species with an ED-based process to convert salt to acid and recovery of the base [135,141146]. Such a solution improves synthesis efficiency, reduces the environmental impact by eliminating wastes and assures longer lifetime of membranes, especially of costly BPMs.

Different membrane techniques were used for production/recovery of organic acids or of aminoacids. ME was proposed as a simple method for recovery of lactic acid from its sodium salt, but AEM performance was insufficient [147]. ED-M allowed for the preparation of pyrazine 2,3-dicarboxylic acid from its potassium salt [148] or for the recovery of L-malic acid from a fermentation broth [149]. ISED allowed production of lactic acid from sodium lactate [150], L-lysine from its monohydrochloride [151] or to recover the malic acid from its salt [152]. EED was applied for recovery of organic acids from cyclohexanone wastes [153], and, in configuration with two CEMs (which is in fact closer to ISED as it doesn’t allow pure product) (Fig. 7), was proposed for conversion of sodium glutamate into glutamic acid [138] and sodium salicylate into salicylic acid [154] ED-M was shown to be effective in recovery of lactic [155157] and iminodiacetic [158] acids. However, BMED is the most widely used membrane technique for this purpose, and some pilot and commercial industrial plants are currently under operation worldwide, mostly to recover acids from fermentation broths [18,159]. BMED was also demonstrated to be effective in recovery of lactic acid [160166], citric acid [167172,191], fumaric acid [173] from fermentation broth, but also in salts conversion in the following acids: formic acid [174,175], acetic acid [176,177], gluconic acid [172,192], p-toluenesulfonic acid [178], salicylic acid [179], ascorbic acid [180, 181], lactobionic acid [182], aminoacids [183] and morpholine [184]. The above processes encounter typical obstacles characteristic of BMED: proton and hydroxyl leakage through monopolar IEMs, and ion leakage through BPM.

Schematic representation of EED combined with ISED.
Figure 7

Schematic representation of EED combined with ISED.

In the case of high molecular weight compounds, additional obstacles are poor solubility and often rather low conductivity of aquatic solutions which results in high energy consumption. To overcome this, processes are conducted at elevated temperatures [179], coupled with electrodeionization in which the presence of ion-exchange resin in the diluate compartment effectively decreases the stack electrical resistance [185], or process solutions are pre-concentrated by ED [135]. BMED conducted in mixed water-alcohol mixtures (so-called two-phase bipolar membrane electrodialysis, TPBMED) allowed for production of some acids: salicylic [186], sebacic [187], and long-chain linear acids of formula CnH2n+1COOH, with n = 2 – 7 [188] and n = 7 – 15 [189].

Apart from the membrane technique used, the stack configuration is often crucial for ion transport and for overall process performance: and many different configurations can be applied for production of the compound with different results [170,190192], as it can minimize the possibility of leakage and contamination [191,193].

Organic base recovery is not as widely studied as that of organic acids; however, BMED was demonstrated to be successful in conversion of monoethanolamine chloride into monoethanolamine [195]. It was also reported that 2-amino-1-propanol can be recovered from its sulfate solution [194]. When recovering organic bases by BMED, a three-compartment stack configuration is usually applied (Fig. 3a). This has a significant impact on CE due to the proton leakage and subsequent transport of hydrogen ions through CEM leading to water formation [195].

BMED also constitutes a promising method for recovery of glyphosate from neutralization liquor in the pesticide industry; recovered HCl and NaOH can be used for hydrolysis of the intermediate products, making it a step towards a zero liquid discharge process [196].

4.9 Regeneration of spent sorbents in the flue gas treatment processes

Alkaline sorbents, such as sodium hydroxide or alkanolamines, are used for desulfurization of flue gas from power plants. BMED was found to be an attractive method for regeneration of spent solutions to recover alkali sorbent and sulfuric acid at relatively high efficiency (around 85%) and low cost as compared to metathesis and ion exchange [197]. BMED is also suitable for the regeneration of alkanolylamine sulfates, formed in the course of desulfurization [198200]. BMED, as an efficient and economically attractive method of regeneration of spent sorbent, was already commercialized as a part of Soxal flue gas desulphurization technology which integrates SO2 absorption with BMED to convert sulfur dioxide from the flue gas into valuable sulfur compounds [1]. Recent reports on the use of EED to regenerate NaOH sorbent from flue-gas desulfurization and simultaneously produce H2SO4 as by-product show efficiency similar to the chlor-alkali industry (CE above 84%), which led the authors to the conclusion that EED can be considered as an economically feasible method [201,202]. It should be noted, however, that the investment costs were not assessed. The above reports indicate that some of the electromembrane processes can be effectively used to improve the efficiency and in some cases the economy of flue gas desulphurization units and generate valuable byproduct.

Similar to desulfurization, alkaline sorbents such as alkanolamines, sodium hydroxide, potassium or sodium carbonate and ammonia are applied for CO2 capture and sequestration. There, BMED can replace such a sorbent thermal decomposition (regeneration) step because acidification of spent solution, with the protons produced by BPM, leads to the release of gaseous CO2 from the weak carbonic acid and thus allows for sorbent regeneration. This recovery process is attractive due to very low energy consumption – as low as 0.55 kWh kg-1 CO2 for alkaline carbonates [203205] and around 2−4 kWh kg-1 CO 2for ammonia [206]. The main obstacle in BMED-based CO2 desorption is CO2 gas evolution inside the membrane module compartments, resulting in an increased stack resistance and high energy consumption at high current densities [207]. This was avoided by operating a BMED stack at elevated pressures, up to 6 atm and the controlled release of CO2 dissolved outside of the module. This high-pressure operation of a BMED stack resulted in a 29% reduction in energy consumption, as compared to the stack operated at 1.5 atm, even at a high current density of around 1400 A m-2.

In the newly-developed process for CO2 capture, calcium or magnesium carbonates are generated for safe and permanent carbon storage [208,209]. This process consists of four steps: leaching of Ca/Mg from waste cement powder by acid, absorption of CO2 from flue-gas in alkali (NaOH or KOH), precipitation of calcium (magnesium) carbonate by reacting two above-mentioned streams and BMED-splitting of the remaining salt solution to corresponding acid and base which are returned to an extraction and capture step, respectively. This process was found to be quite energy consumptive, however, energy demand decreased when weak acid, eg. acetic acid, was used for leaching.

The environmental impacts of BMED processing of sodium hydroxide-based CO2 sorbents were evaluated in a pilot scale [210] with an important conclusion that a promising CO2 capture efficiency (up to 530 g CO2 per kg NaOH) can only be achieved if the electricity used for sorbent regeneration originates from the renewable sources. For conventional, carbon-based energy sources, the overall emission of CO2 was found to exceed the amounts removed with sodium hydroxide. Such analysis and scale-up experiments may be crucial for evaluation of the applicability of electromembrane processes for CO2 removal technologies.

Summary

As shown in the previous sections, IEMs can be effectively used in chemical syntheses either for separation of the ionic product from the reaction mixture, ion introduction (or replacement) due to the formation of the desired product (in the case of monopolar membranes) or to generate hydrogen (H+) or hydroxyl (OH-) ions (BPM) for synthesis of acids or bases. The list of the potential chemical synthesis processes that employ IEMs include: membrane electrolysis (ME), electro-electrodialysis (EED), electrodialysis metathesis (ED-M), ion-substitution electrodialysis (ISED) and electrodialysis with bipolar membrane (BMED). Some of these processes (ME) allow for electrosynthesis of inorganic and organic compounds by a redox (reduction or oxidation) reaction where the products are obtained at high current efficiency (CE) and with high yield and purity. The major role of IEM in ME is to separate reaction mixtures from the electrode at which any unintended reaction might take place. Other processes (EED, ED-M, ISED) allow for ion replacement reactions of inorganic and organic salts (including double-replacement – metathesis reactions)allowing the synthesis of acids, bases and ionic liquids. The major role of IEMs in these processes lies in the membranes’ selectivity towards either cations (CEMs) or anions (AEMs) which allows synthesis of compounds with very high purity. The main obstacle, however, iselectroosmotic solvent transport which limits the product concentration in the concentrate stream. Bipolar membrane based BMED allows for salt conversion, both in aqueous and non-aqueous solutions, due to the possibility of solvent (water, alcohol) splitting into a proton and a corresponding anion, inside the BPM. Thus, inorganic and organic salts can be effectively converted to acids and bases. The main limitation lies in the membrane stability towards concentrated acids or alkalis. All of the above processes can be applied for reuse or recovery of inorganic and organic acids or bases from the reaction mixtures; however, BMED seems to be the most promising method. It can be employed in such vital processes as regeneration of spent sorbents used for CO2 removal from power plant flue gas.

The number and the quality of the scientific reports cited herein and in comprehensive patent review presented elsewhere [203] indicates a great interest in the application of IEM-based chemical syntheses. Given the large number of syntheses to which IEMs can be applied (redox, ion-substitution), we anticipate an incremental growth in successful applications of these processes in chemical and related industries.

Acknowledgements

This research work was financially supported by Polish National Science Centre grant DEC-2013/11/N/ST8/01222.

References

  • 1

    Strathmann, H., Ion-Exchange Membrane Separation Processes, Elsevier, New York 2004 Google Scholar

  • 2

    Tanaka Y., Ion Exchange Membranes; Fundamentals and Applications. In: Membrane Science and Technology Series, vol. 12. Elsevier, Amsterdam 2007 Google Scholar

  • 3

    Xu T., Ion exchange membranes: state of their development and perspective, J. Membr. Sci., 2005, 263, 1–29 Google Scholar

  • 4

    Heitner-Wirguin C., Recent advances in perfluorinated ionomer membranes: structure, properties and applications, J. Membr. Sci., 1996, 120, 1–33 Google Scholar

  • 5

    Mauritz K.A., Moore R.B., State of Understanding of Nafion, Chem. Rev., 2004, 104, 4535–4585 Google Scholar

  • 6

    Cherif A.T., Gavach C., Cohen T., Dagard P., Albert L., Sulfuric acid concentration with an electro-electrodialysis process, Hydrometallurgy, 1988, 21, 191–201 Google Scholar

  • 7

    Pourcelly G., Tugas I. Gavach C., Electrotransport of sulphuric acid in special anion exchange membranes for the recovery of acids, J. Membr. Sci., 1994, 97, 99–107 14    Hanna Jaroszek, Piotr Dydo Google Scholar

  • 8

    Strathmann H., Krol J.J., Rapp H.-J., Eigenberger G., Limiting current density and water dissociation in bipolar membranes, 1997, 125, 123–142 Google Scholar

  • 9

    Gineste J.I., Pourcelly G., Lorrain Y., Persin F., Analysis of factors limiting the use of bipolar membranes, J. Membr. Sci., 1996, 112, 199–208 Google Scholar

  • 10

    Wilhelm F.G., Pünt I., Van Der Vegt N.F.A., Wessling M., Strathmann H., Optimisation strategies for the preparation of bipolar membranes with reduced salt ion leakage in acid–base electrodialysis, J. Membr. Sci., 2001, 182, 13–28 Google Scholar

  • 11

    Lorrain Y., Pourcelly G., Gavach C., Transport mechanism of sulfuric acid through an anion exchange membrane, Desalination 1997, 109, 231–239 Google Scholar

  • 12

    Hnát J., Paidar M., Schauer J., Žitka J., Bouzek K., Polymer anion-selective membranes for electrolytic splitting of water. Part I: stability of ion-exchange groups and impact of the polymer binder, J. Appl. Electrochem., 2011, 41, 1043–1052 Google Scholar

  • 13

    Rakib M., Mocoteguy Ph., Viers Ph., Petit E., Durand G., Behaviour of Nafion 350 membrane in sodium sulphate electrochemical splitting: continuous process modelling and pilot scale tests, J. Appl. Electrochem., 1999, 29, 1439–1448 Google Scholar

  • 14

    Jörissen J., Simmrock K.H., The behaviour of ion exchange membranes in electrolysis and electrodialysis of sodium sulphate, J. Appl. Electrochem., 1991, 21, 869–876 Google Scholar

  • 15

    Pourcelly G., Electrodialysis with bipolar membranes: principles, optimization, and applications, Russ. J. Electrochem., 2002, 38, 919–926 Google Scholar

  • 16

    Balster J., Stamatialis D., Wessling M., Electro-catalytic membrane reactors and the development of bipolar membrane technology, Chem. Eng. Process. Process Intensif., 2004, 43, 1115–1127 Google Scholar

  • 17

    Xu T., Electrodialysis processes with bipolar membranes (EDBM) in environmental protection—a review, Resour. Conserv. Recycl., 2002, 37, 1–22 Google Scholar

  • 18

    Pourcelly G., Gavach C., Electrodialysis water splitting-application of electrodialysis with bipolar membranes. In: Kemperman A.J.B. (Ed.), Handbook on Bipolar Membrane Technology, Twente University Press, Enschede, 2000 Google Scholar

  • 19

    Bauer B., Gerner F.J., Strathmann H., Development of bipolar membranes, Desalination, 1988, 68, 279–292 Google Scholar

  • 20

    Nagasubramanian N., Chlanda F.P., Liu K.J., Use of bipolar membranes for generation of acid and base — An engineering and economic analysis, J. Membr. Sci., 1977, 2, 109–124 Google Scholar

  • 21

    Raucq D., Pourcelly G., Gavach C., Production of sulphuric acid and caustic soda from sodium sulphate by electromembrane processes. Comparison between electro-electrodialysis and electrodialysis on bipolar membrane, Desalination, 1993, 91, 163–175 Google Scholar

  • 22

    Rottiers T., De la Marche G., Van der Bruggen B., Pinoy L., Co-ion fluxes of simple inorganic ions in electrodialysis metathesis and conventional electrodialysis, J. Membr. Sci., 2015, 492, 263–270 Google Scholar

  • 23

    Pisarska B., Transport of co-ions across ion exchange membranes in electrodialytic metathesis MgSO4 + 2KCl -› K2SO4 + MgCl2, Desalination, 2008, 230, 298–304 Google Scholar

  • 24

    Hestekin J., Ho T., Potts T. (2010) Electrodialysis in the Food Industry. In: Peinemann K.V., Pereira Nunes S., Giorno L. (Eds.) Membrane Technology: Membranes for Food Applications, Volume 3, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany Google Scholar

  • 25

    Keil P., Schwiertz M., König A., Metathesis of ionic liquids: Continuous ion exchange by donnan dialysis, Chem. Eng. Technol., 2014, 37, 919–926 Google Scholar

  • 26

    O’Brien T., Bommaraju T.V, Hine F., Handbook of chlor-alkali technology: Volume I: Fundamentals. Plenum Publishing Corporation 2005 Google Scholar

  • 27

    “Integrated Pollution Prevention and Control (IPPC) – Reference Document on Best Available Techniques in the Chlor-Alkali Manufacturing Industry”. European Commission. Retrieved 2007-09-02 

  • 28

    Bergner D., Membrane cells for chlor-alkali electrolysis, J. Appl. Electrochem. 12, 1982, 631–644 Google Scholar

  • 29

    Sajima Y., Nakao M., Shimohira T., Miyake H., Advances in Flemion Membranes for Chlor-Alkali Production. In: Wellington T.C. (Ed.), Mod. Chlor-Alkali Technol. SE – 14, Springer Netherlands, 1992: 159–175 Google Scholar

  • 30

    Best Available Techniques (BAT) Reference Document for the Production of Chlor-alkali. Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control), 2014 Google Scholar

  • 31

    O’Brien T., Bommaraju T.V, Hine F., Handbook of chlor-alkali technology: Volume II: Brine Treatment and Cell Operation. Plenum Publishing Corporation 2005 Google Scholar

  • 32

    Zeng K., Zhang D., Recent progress in alkaline water electrolysis for hydrogen production and applications, Prog. Energy Combust. Sci., 2010, 36, 307–326 Google Scholar

  • 33

    Vazac K., Paidar M., Roubalik M., Bouzek K., Impact of the cation exchange membrane thickness on the alkaline water electrolysis, Chemical Engineering Transactions, 2014, 41, 187-192 Google Scholar

  • 34

    Hnát J., Paidar M., Schauer J., Žitka J., Bouzek K., Polymer anion-selective membranes for electrolytic splitting of water. Part II: Enhancement of ionic conductivity and performance under conditions of alkaline water electrolysis, J. Appl. Electrochem., 2012, 42, 545–554 Google Scholar

  • 35

    Horn R.E, Production of potassium or sodium stannate, Patent US 4066518 A, 1976. 

  • 36

    Scott K., Handbook of Industrial Membranes, Elsevier, 1998 Google Scholar

  • 37

    Bolick R.E., Cawlfield D.W., French J.M., Electrochemical process for producing hydrosulfite solutions, Patent US 4793906 A, 1986 

  • 38

    Kaczur J.J., Cawlfield D.W., Electrolytic process for producing chlorine dioxide, Patent US 5084149 A, 1991 

  • 39

    Zhang Q.X., Sciences and Technologies in Hydrometallurgy Separations, Science Press of China, Beijing, 2004, 276–307 Google Scholar

  • 40

    Onuki K., Hwang G.J., Arifal, Shimizu S., Electro-electrodialysis of hydriodic acid in the presence of iodine at elevated temperature, J. Membr. Sci., 2001, 192, 193–199 Google Scholar

  • 41

    Hong S.D., Kim C.H., Kim J.G., Lee S.H., Bae K.K., Hwang G.J., HI concentration from HIx (HI–H2O–I2) solution for the thermochemical water-splitting IS process by electro-electrodialysis, J. Ind. Eng. Chem., 2006, 12, 566–570Google Scholar

  • 42

    Hong S.D., Kim J.K., Bae K.K., Lee S.H., Choi H.S., Hwang G.J., Evaluation of the membrane properties with changing iodine molar ratio in HIx (HI–I2–H2O mixture) solution to concentrate HI by electro-electrodialysis, J. Membr. Sci., 2007, 291, 106–110Google Scholar

  • 43

    Yoshida M., Tanaka N., Okuda H., Onuki K., Concentration of HIx solution by electro-electrodialysis using Nafion 117 for thermochemical water-splitting IS process, Int. J. Hydrogen. Energy, 2008, 33, 6913–6920 Ion-exchange membranes in chemical synthesis – a review   15 Google Scholar

  • 44

    Karimi F., Ashrafizadeh S.N., Mohammadi F., Process parameter impacts on adiponitrile current efficiency and cell voltage of an electromembrane reactor using emulsion-type catholyte, Chem. Eng. J., 2012, 183, 402–407 Google Scholar

  • 45

    Koter S., Electrosynthesis of methanolates by membrane electrolysis, Polish J. Chem., 1997, 71, 232-243 Google Scholar

  • 46

    Hamann C.H., Schneider J., Schmittinger P., Stephan R., Process for manufacturing alcali alcoholates, Patent EP 0146771 B1, 1984 

  • 47

    Oloman C., Electrosynthesis of p-Benzoquinone and Hydroquinone, AIChE Symp. Ser., 1981, 204 264–272 Google Scholar

  • 48

    Obberrauch E., Eberson L., An electrochemical route to trimethylhydroquinone, J. Appl. Electrochem., 1986, 16, 575–582 Google Scholar

  • 49

    Clark J.M.T., Goodridge F., Plimley R.E., A reaction model for the electrochemical production of p-anisidine. J. Appl. Electrochem., 1988, 18, 899–903 Google Scholar

  • 50

    Chollier-Brym M.J., Epron F., Lamy-Pitara E., Barbier, J., Catalytic and electrocatalytic oxidation of oxalic acid in aqueous solutions of different compositions, J. Electroanal. Chem., 1999, 474, 147–154 Google Scholar

  • 51

    Pierre G., Kordi M.E., Cauquis G., Process for preparation of glyoxylic acid through electrochemical anodic oxidation of glyoxal, Patent US 4595467 A, 1985 

  • 52

    Raoult E., Sarrazin J., Tallec A., Use of ion exchange membranes in preparative organic electrochemistry. I. Anodic methoxylation of some olefins, J. Appl. Electrochem., 1984, 14, 639–643 Google Scholar

  • 53

    Raoult E., Sarrazin J., Tallec A., Use of ion exchange membranes in preparative organic electrochemistry. II. Anodic dimethoxylation of furan, J. Appl. Electrochem., 1985, 15, 85-91 Google Scholar

  • 54

    Raoult E., Sarrazin J., Tallec A., Use of ion exchange membranes in preparative organic electrochemistry. IV. Electroreduction of dibromo compounds and solvent effects, J. Membr. Sci,. 1987, 30, 23–37 Google Scholar

  • 55

    Yeager H. L., Gronowski A. A., Membrane applications. In: Tant M. R., Mauritz K. A., Wilkes G. L. (Eds.), Ionomers, Springer Netherlands, 1997 Google Scholar

  • 56

    Sarrazin J., Tallec A., Use of ion exchange membranes in preparative organic electrochemistry: New processes for electrolysis, J. Electroanal. Chem. Interfacial Electrochem., 1982, 137, 183–188 Google Scholar

  • 57

    Jörissen J., Ion exchange membranes as solid polymer electrolytes (spe) in electro-organic syntheses without supporting electrolytes,. Electrochim. Acta, 1996, 41, 553–562 Google Scholar

  • 58

    Jörissen J., Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology, J. Appl. Electrochem., 2003, 33, 969–977 Google Scholar

  • 59

    Nagarale R.K., Gohil G.S., Shahi V.K., Recent developments on ion-exchange membranes and electro-membrane processes, Adv. Colloid Interface Sci., 2006, 119, 97–130 Google Scholar

  • 60

    Wang Y., Chen K.S., Mishler J., Cho, S.C., Adroher X.C., A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research, Appl. Energy, 2011, 88, 981–1007 Google Scholar

  • 61

    Merle G., Wessling M., Nijmeijer K., Anion exchange membranes for alkaline fuel cells: A review, J. Membr. Sci., 2011, 377, 1–35 Google Scholar

  • 62

    Ogumi Z., Nishio K., Yoshizawa S., Application of the spe method to organic electrochemistry—II. Electrochemical hydrogenation of olefinic double bonds, Electrochim. Acta, 1981, 26, 1779–1782 Google Scholar

  • 63

    Ogumi, Z., Yamashita, H., Nishio, K., Takehara, Z.-I., Yoshizawa, S. Application of the solid polymer electrolyte (SPE) method to organic electrochemistry—III. Kolbe type reactions on Pt-SPE, Electrochim. Acta, 1983, 28, 1687–1693 Google Scholar

  • 64

    Ogumi Z., Ohashi S., Takehara Z., Application of the SPE method to organic electrochemistry—VI. Oxidation of cyclohexanol to cyclohexanone on Pt-SPE in the presence of iodine and iodide, Electrochim. Acta, 30, 1985, 121–124 Google Scholar

  • 65

    Ogumi Z., Inaba M., Ohashi S., Uchida M., Takehara Z., Application of the SPE method to organic electrochemistry—VII. The reduction of nitrobenzene on a modified Pt-Nafion, Electrochim. Acta, 1988, 33, 365–369 Google Scholar

  • 66

    Inoka M., Ogumi Z., Takekora Z., Application of the solid polymer electrolyte method to organic electrochemistry. XIV. Effect of solvents on the electroreduction of nitrobenzene on Cu, Pt-Nafion, J. Electrochem. Soc., 1993, 140, 19–22 Google Scholar

  • 67

    Ogumi Z., Inatomi K., Hinatsu J. T., Takehara Z., Application of the SPE method to organic electrochemistry—XIII. Oxidation of geraniol on Mn, Pt-Nafion, Electrochim. Acta,1992, 37, 1295–1299 Google Scholar

  • 68

    Hoormann D., Kubon C., Jörissen J., Kröner L., Pütter H., Analysis and minimization of cell voltage in electro-organic syntheses using the solid polymer electrolyte technology, J. Electroanal. Chem., 2011, 507, 215–225 Google Scholar

  • 69

    An W., Hong J.K., Pintauro P.N., Current efficiency for soybean oil hydrogenation in a solid electrolyte reactor, J. Appl. Electrochem., 1998, 28, 947–954 Google Scholar

  • 70

    Pintauro N., Gil M.P., Warner K., List G., Neff W., Electrochemical Hydrogenation of Soybean Oil with Hydrogen Gas, Ind. Eng. Chem. Res., 2005, 44, 6188–6195 Google Scholar

  • 71

    Chen Y.L., Chou T.C., Electrochemical Reduction of Benzaldehyde Using Ag/Nafion as an Electrode, Ind. Eng. Chem. Res., 1994, 33, 676–680 Google Scholar

  • 72

    Kunugi A., Fujioka M., Yasuzawa M., Inaba M., Ogumi Z., Electroreduction of 2-cyclohexen-1-one on metal-solid polymer electrolyte composite electrodes, Electrochim. Acta, 1998, 44, 653–657 Google Scholar

  • 73

    Jiang J.H., Wu B.L., Cha C.S. Electrosynthesis of p-methoxybenzaldehyde on graphite/Nafion membrane composite electrodes, Electrochim. Acta, 1998, 43, 2549–2552 Google Scholar

  • 74

    Simond O., Comninellis C., Anodic oxidation of organics on Ti/IrO2 anodes using Nafion® as electrolyte, Electrochim. Acta, 1997, 42, 2013–2018 Google Scholar

  • 75

    Sedighi S., Gardner C.L., A kinetic study of the electrochemical hydrogenation of ethylene, Electrochim. Acta, 2010, 55, 1701–1708 Google Scholar

  • 76

    Haerens K., De Vreese P., Matthijs E., Pinoy L., Production of ionic liquids by electrodialysis, Sep. Purif. Technol., 2012, 97, 90–95 Google Scholar

  • 77

    Himmler S., Konig A., Wasserscheid P., Synthesis of [EMIM]OH via bipolar membrane electrodialysis – precursor production for the combinatorial synthesis of [EMIM]-based ionic liquids, Green Chem., 2007, 9, 935–942 Google Scholar

  • 78

    Meng H., Li H., Li Ch., Li L., Synthesis of ionic liquid using a four-compartment configuration electrodialyzer, J. Membr. Sci., 2008, 318, 1–4 Google Scholar

  • 79

    Bai L., Wang X.L., Nie Y., Dong H.F., Zhang X.P., Zhang S.J., Study on the recovery of ionic liquids from dilute effluent by 16    Hanna Jaroszek, Piotr Dydo electrodialysis method and the fouling of cation-exchange membrane, Sci. China Chem., 2013, 56, 1811–1816 Google Scholar

  • 80

    Li H., Meng H., Li C., Li L., Competitive transport of ionic liquids and impurity ions during the electrodialysis process, Desalination, 2009, 245, 349–356 Google Scholar

  • 81

    Alheritiere, C., Ernst W.R., Davis T.A., Metathesis of Sodium Salt Systems by Electrodialysis, Desalination, 1998, 115, 189–198. Google Scholar

  • 82

    Pisarska B., Badania elektrodializy z podwojnej wymiany w procesie Na2SO4 + 2KCl -› K2SO4 + 2NaCl, Przem. Chem., 2006, 85, 1500–1504 (in Polish) Google Scholar

  • 83

    Thampy S.K., Joshi B.S., Govindan K.P., Preparation of potassium bicarbonate by electrodialysis technique, Indian Journal of Technology, 1985, 23, 454–457 Google Scholar

  • 84

    Machuca L., Cernin A., A method of production of potassium nitrate by electrodialysis and apparatus for making the same, Patent WO 2014154189 A1, 2014 

  • 85

    Jaroszek H., Lis A., Dydo P., Synthesis of potassium nitrate by metathesis-electrodialysis. In: Bodzek M., Pelczar J. (Eds.), Membranes and Membrane Processes in Environmental Protection, 119, 2014, 351-361 Google Scholar

  • 86

    Forquet V., Sabaté C.M., Jacob G., Guelou Y., Delalu H., Darwich C., Energetic 2, 2-Dimethyltriazanium Salts: A New Family of Nitrogen-Rich Hydrazine Derivatives, Chem Asian J., 2015, 10, 1668-1675 Google Scholar

  • 87

    Wang T.T., Yang W.C., Factors affecting the current and the voltage efficiencies of the synthesis of quaternary ammonium hydroxides by electrolysis–electrodialysis, Chem. Eng. J., 2001, 81, 161–169 Google Scholar

  • 88

    Gomez J.R.O., Estrada M.T., Electrosynthesis of quaternary ammonium hydroxides, J. Appl. Electrochem., 1991, 21, 365–367 Google Scholar

  • 89

    Kumar M., Tripathi B.P., Saxena A., Shahi V.K., Electrochemical membrane reactor: Synthesis of quaternary ammonium hydroxide from its halide by in situ ion substitution, Electrochim. Acta., 2009, 54, 1630–1637 Google Scholar

  • 90

    Shen J., Yu J., Liu L., Lin J., Van der Bruggen B., Synthesis of quaternary ammonium hydroxide from its halide salt by bipolar membrane electrodialysis (BMED): effect of molecular structure of ammonium compounds on the process performance, J. Chem. Technol. Biotechnol., 2014, 89, 841–850 Google Scholar

  • 91

    Shen J., Yu J., Huang J., Van der Bruggen B., Preparation of highly pure tetrapropyl ammonium hydroxide using continuous bipolar membrane electrodialysis, Chem. Eng. J., 2013, 220, 311–319 Google Scholar

  • 92

    Feng H.Z., Huang C.H., Xu T., Production of tetramethyl ammonium hydroxide using bipolar membrane electrodialysis, Ind. Eng. Chem. Res., 2008, 47, 7552–7557 Google Scholar

  • 93

    Sridhar S., Electrodialysis in a non-aqueous medium: production of sodium methoxide, J. Membr. Sci., 1996, 113, 73-79 Google Scholar

  • 94

    Sridhar S., Feldmann C., Electrodialysis in a non-aqueous medium: a clean process for the production of acetoacetic ester, J. Membr. Sci., 1997, 124, 175–179 Google Scholar

  • 95

    Li Q., Huang C., Xu T., Bipolar membrane electrodialysis in an organic medium: Production of methyl methoxyacetate, J. Membr. Sci., 2009, 339, 28–32 Google Scholar

  • 96

    Oztekin Y., Yazicigil Z., Recovery of acids from salt forms of sodium using cation-exchange membranes, Desalination, 2007, 212, 62–69 Google Scholar

  • 97

    Yazicigil Z., Salt splitting with cation-exchange membranes, Desalination, 2007, 212, 70–78 Google Scholar

  • 98

    Martin A.D., Sodium hydroxide production by the electrohydrolysis of aqueous effluent streams containing sodium salts, Electrochem. Eng. Environ. I. ChemE Symp. Ser., 1992, 27, 153–162 Google Scholar

  • 99

    Frenzel I., Holdik H., Stamatialis D.F., Pourcelly G., Wessling M., Chromic acid recovery by electro-electrodialysis: I. evaluation of anion-exchange membrane. J. Membr. Sci., 2005, 261, 49–57 Google Scholar

  • 100

    Letord M.M., Ducourroy A., Audran J., Electrochemical cell, especially for recycling of chromic acid, Patent EP 0483015 B1, 1991 

  • 101

    Dalla Costa R.F., Rodrigues M.A.S., Ferreira J.Z., Transport of trivalent and hexavalent chromium through different ion-selective membranes in acidic aqueous media, Sep. Sci. Technol., 1998, 33, 1135–1143 Google Scholar

  • 102

    Khan J., Tripathi B.P., Saxena A., Shahi V. K. Electrochemical membrane reactor: In situ separation and recovery of chromic acid and metal ions, Electrochim. Acta, 2007, 52, 6719–6727 Google Scholar

  • 103

    Frenzel I., Holdik H., Stamatialis D.F., Pourcelly G., Wessling M., Chromic acid recovery by electro-electrodialysis: II. pilot scale process, development, and optimization, Sep. Purif. Technol., 2005, 47, 27–35 Google Scholar

  • 104

    Stender W.W., Seerak I.J., Electrolysis of aqueous solutions of alkali sulphates, Trans. Electrochem. Soc., 1935, 68, 493–520 Google Scholar

  • 105

    Mazrou S., Kerdjoudj H., Cherif A.T., Sodium hydroxide and hydrochloric acid generation from sodium chloride and rock salt by electro-electrodialysis, J. Appl. Electrochem., 1997, 27, 558–567 Google Scholar

  • 106

    Gain E., Laborie S., Viers Ph., Rakib M., Hartmann D., Durand G,. Ammonium nitrate wastewater treatment by an electromembrane process, Desalination, 2002, 149, 337–342 Google Scholar

  • 107

    Sawa T., Hirose Y., Ishii Y., Development of treatment system of waste water containing NH4NO3 by application of electrochemical process, Soda to enso, 1998, 49, 248–257Google Scholar

  • 108

    Ben Ali M.A., Rakib M., Laborie S., Viers P., Durand G., Coupling of bipolar membrane electrodialysis and ammonia stripping for direct treatment of wastewaters containing ammonium nitrate, J. Membr. Sci., 2004, 244, 89–96 Google Scholar

  • 109

    Kurath D.E., Hollenberg G.W., Jue J., Smith J., Virkar A.V., Balagopal S., Sutija D.P., Salt splitting using ceramic membranes, Sep. Sci. Technol., 1997, 32, 557–572 Google Scholar

  • 110

    Girard F., Izquierdo R., Quenneville E., Bah S.T., Paleologou M., Meunier M., Ivanov D., Yelon A., Evaluation of a ceramic– polymer composite cation-selective membrane for sodium salt splitting, J. Electrochem. Soc., 1999, 146, 2919–2924 Google Scholar

  • 111

    Mani K.N., Chlanda F.P., Byszewski C.H., Aquatech membrane technology for recovery of acid/base values from salt streams., Desalination, 1988, 68, 149–166 Google Scholar

  • 112

    Mani K.N., Electrodialysis water splitting technology, J. Membrane Sci., 1991, 58, 117–138Google Scholar

  • 113

    Agrawal A., Sahu K.K., An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries, J. Hazard. Mater., 2009, 171, 61–75 Google Scholar

  • 114

    Paleologou M., Thibault A., Wong P.Y., Thompson R., Berry R.M., Enhancement of the current efficiency for sodium hydroxide production from sodium sulphate in a two-compartment bipolar membrane electrodialysis system, Sep. Purif. Technol., 1997, 11, 159–171 Google Scholar

  • 115

    Paleologou M., Wong P.Y., Berry R.M., Solution to caustic/chlorine imbalance: Bipolar membrane electrodialysis, J. Pulp Pap. Sci., 1992, 18, 138–145 Google Scholar

  • 116

    Thompson R., Paleologou M., Berry R.M., Caustic soda and sulfuric acid production from sodium sulfate by-product of chlorine dioxide generation – economics, Tappi J., 1995, 78, 127–134Google Scholar

  • 117

    Joore L., Verstraeten E., Hooimeijer A., Salt removal and recovery of paperchemicals by use of membrane electro(dia)lysis, Pap. Technol., 2000, 41, 47–54 Google Scholar

  • 118

    Thompson R., Paleologou M., Berry R.M., Sodium recovery with chloride removal from electrostatic precipitator catch at coastal and/or closed-cycle mills using bipolar membrane electrodialysis, Tappi J., 1997, 80, 154–160 Google Scholar

  • 119

    Mazrou S., Kerdjoudj H., Chérif A.T., Elmidaoui A., Molénat J., Regeneration of hydrochloric acid and sodium hydroxide with bipolar membrane electrodialysis from pure sodium chloride, New J. Chem., 1998, 22, 355–359Google Scholar

  • 120

    Carmen C., Bipolar membrane pilot performance in sodium chloride salt splitting, Desalination & Water Reuse, 1995, 4, 46–52Google Scholar

  • 121

    Faverjon F., Durand G., Rakib M., Regeneration of hydrochloric acid and sodium hydroxide from purified sodium chloride by membrane electrolysis using a hydrogen diffusion anode-membrane assembly, J. Membr. Sci., 2006, 284, 355–359 Google Scholar

  • 122

    Paleologou M., Wong P.Y., Thompson R., Berry R.M., Bipolar membrane electrodialysis for sodium hydroxide production from sodium chlorate: Comparison of the two- and three-compartment configurations, J. Pulp Pap. Sci., 1996, 22, 1–7 Google Scholar

  • 123

    Paleologou M., Berry R.M., Berry R.M., Sodium chlorate splitting: a new solution to the problems of chemical imbalance in kraft mills, J. Pulp Pap. Sci., 1994, 20, 39–45 Google Scholar

  • 124

    Cherif A.T., Molenat J., Elmidaoui A., Nitric acid and sodium hydroxide generation by using bipolar membranes, J. Appl. Electrochem., 1997, 27, 1069–1074 Google Scholar

  • 125

    Robinson J.M., Mechalke E.J., Rogers T.E., Holland P.L., Barber W.C., Electrohydrolysis recycling of waste iodide salts into hydriodic acid for the chemical conversion of biomass into liquid hydrocarbons, J. Membr. Sci., 2000, 179, 109–125 Google Scholar

  • 126

    Xu T., Development of bipolar membrane-based processes, Desalination, 2001, 140, 247–258 Google Scholar

  • 127

    Graillon S., Persin F., Pourcelly G., Gavach C., Development of electrodialysis with bipolar membrane for the treatment of concentrated nitrate effluents, Desalination, 107, 1996, 159–169 Google Scholar

  • 128

    Ben-Ali M.A., Rakib M., Laborie S., Viers Ph., Durand G., Coupling of bipolar membrane electrodialysis and ammonia stripping for direct treatment of wasterwater containing ammonium nitrate, J. Membr. Sci., 2004, 244, 89–96 Google Scholar

  • 129

    Wei Y.X., Li C.R., Wang Y.M., Zhang X., Li Q.H., Xu T., Regenerating sodium hydroxide from the spent caustic by bipolar membrane electrodialysis (BMED), Sep. Purif. Technol., 2012, 86, 49–54 Google Scholar

  • 130

    Wei Y., Wang Y., Zhang X., Xu T., Comparative study on regenerating sodium hydroxide from the spent caustic by bipolar membrane electrodialysis (BMED) and electro-electrodialysis (EED), Sep. Purif. Technol., 2013, 118, 1–5 Google Scholar

  • 131

    Lin A.G., Application of bipolar membrane electrodialysis in production of silicic acid, Membr. Sci. Technol. (in Chinese), 2001, 21, 66–69 Google Scholar

  • 132

    Cherif A.T., Gavach C., Cohen T., Dagard P., Albert L., Sulfuric acid concentration with an electro-electrodialysis process, Hydrometallurgy, 1988, 21, 191–201 Google Scholar

  • 133

    Tzanetakis N., Taama W., Scott K., Salt splitting in a three-compartment membrane electrolysis cell, Filtr. Sep., 2002, 39, 30–38 Google Scholar

  • 134

    Gineste J.L., Pourcelly G., Lorrain Y., Persin F., Gavach C., Analysis of factors limiting the use of bipolar membranes: a simplified model to determine trends, J. Membr. Sci., 1996, 112, 199–208 Google Scholar

  • 135

    Huang C., Xu T., Zhang Y., Xue Y., Chen G., Application of electrodialysis to the production of organic acids: State-of-theart and recent developments, J. Membr. Sci., 2007, 288, 1–12 Google Scholar

  • 136

    Kumar S., Babu B.V., Process intensification for separation of carboxylic acids from fermentation broths using reactive extraction, J. Fut. Eng. Technol., 2008, 3, 21–28 Google Scholar

  • 137

    Li H., Mustacchi R., Knowles C.J., Skibar W., Sunderland G., Dalrymple I., Jackman S.A., An electrokinetic bioreactor: using direct electric current for enhanced lactic acid fermentation and product recovery, Tetrahedron, 2004, 60, 655–661 Google Scholar

  • 138

    Kumar M., Tripathi B.P., Shahi V.K., Electro-membrane reactor for separation and in situ ion substitution of glutamic acid from its sodium salt, Electrochim. Acta., 2009, 54, 4880–4887 Google Scholar

  • 139

    Ishizaki A., Nomura Y., Iwahara M., Built-in electrodialysis batch culture, a new approach to release of end product inhibition, J. Ferment. Bioeng., 1990, 70, 108–113 Google Scholar

  • 140

    Hongo M., Nomura Y., Iwahara M., Novel method of lactic acid production by electrodialysis fermentation, Appl. Environ. Microbiol., 1986, 52, 314–319 Google Scholar

  • 141

    Bailly M., Roux-de Balmann H., Aimar P., Lutin F., Cheryan M., Production processes of fermented organic acids targeted around membrane operations: Design of the concentration step by conventional electrodialysis, J. Membr. Sci., 2001, 191, 129–142 Google Scholar

  • 142

    Novalic S., Kulbe K.D., Separation and concentration of citric acid by means of electrodialytic bipolar membrane technology, Food Technol. Biotechnol., 1998, 36, 193–195Google Scholar

  • 143

    Wang X., Wang Y., Zhang X., Feng H., Xu T., In-situ combination of fermentation and electrodialysis with bipolar membranes for the production of lactic acid: Continuous operation, Bioresour. Technol., 2013, 147, 442–448Google Scholar

  • 144

    Ferrer J.S.J., Laborie S., Durand G., Rakib M., Formic acid regeneration by electromembrane process, J. Membr. Sci., 2006, 280, 509–516Google Scholar

  • 145

    Hábová V., Melzoch K., Rychtera M., Sekavová B., Electrodialysis as a useful technique for lactic acid separation from a model solution and a fermentation broth, Desalination, 2004, 163, 361–372Google Scholar

  • 146

    Lameloise M.L., Lewandowski R., Recovering l-malic acid from a beverage industry waste water: Experimental study of the conversion stage using bipolar membrane electrodialysis, J. Membr. Sci., 2012, 403-404, 196–202 Google Scholar

  • 147

    Saxena A., Gohil G.S., Shahi V.K., Electrochemical membrane reactor: single-step separation and ion substitution for the recovery of lactic acid from lactate salts, Ind. Eng. Chem. Res., 2007, 46, 1270–1276 Google Scholar

  • 148

    Sridhar P., Palaniappan R., Preparation of pyrazine 2,3-dicarboxylic acid from its potassium salt by electrodialysis., J. Appl. Electrochem., 1989, 19, 293–295 18    Hanna Jaroszek, Piotr Dydo Google Scholar

  • 149

    Sridhar S., Application of electrodialysis in the production of malic acid, J. Membr. Sci., 1988, 36, 489–95 Google Scholar

  • 150

    Choi J.H., Kim S.H., Moon S.H., Recovery of lactic acid from sodium lactate by ion substation using ion-exchange membrane, Sep. Purif. Technol., 2002, 28, 69–79 Google Scholar

  • 151

    Zhang Y., Chen Y., Yue M., Ji W., Recovery of L-lysine from L-lysine monohydrochloride by ion substitution using ion-exchange membrane, Desalination, 2011, 271, 163–168 Google Scholar

  • 152

    Bélafi-Bakó K., Nemestóthy N., Gubicza L., A study on applications of membrane techniques in bioconversion of fumaric acid to l-malic acid, Desalination, 2004, 162, 301–306 Google Scholar

  • 153

    Wang Z.X., Luo Y.B., Yu P., Recovery of organic acids fromwaste salt solutions derived from the manufacture of cyclohexanone by electrodialysis, J.Membr. Sci., 2006, 280, 134–137 Google Scholar

  • 154

    Kumar M., Tripathi B.P., Shahi, V.K., Electro-membrane process for in situ ion substitution and separation of salicylic acid from its sodium salt, Ind. Eng. Chem. Res., 2009, 48, 923–930 Google Scholar

  • 155

    Boniardi N., Rota R., Nano G., Mazza B., Lactic acid production by electrodialysis. Part I. Experimental tests, J. Appl. Elelctrochem., 1997, 27, 125–133 Google Scholar

  • 156

    Wang Q.H., Cheng G.S., Sun X.H., Jin B., Recovery of lactic acid from kitchen garbage fermentation broth by four-compartment configuration electrodialyzer, Process Biochem., 2006, 41, 152–158Google Scholar

  • 157

    Heriban V., Škára J., Šturdík E., Ilavský J., Isolation of free lactic acid using electrodialysis, Biotechnol. Tech., 1993, 7, 63–68 Google Scholar

  • 158

    Ochoa G.J.R., Santa-Olalla G.J., de Diego Z.A., Martin R.J.L., Isolation and purification of iminodiacetic acid from its sodium salt by electrodialysis, J. Appl. Elelctrochem., 1993, 23, 56–59 Google Scholar

  • 159

    Huang C., Xu T., Zhang Y., Xue Y., Chen G., Application of electrodialysis to the production of organic acids: State-of-theart and recent developments, J. Membr. Sci., 2007, 288, 1–12 Google Scholar

  • 160

    Kim Y.H., Moon S.H., Lactic acid recovery from fermentation broth using one-stage electrodialysis, J. Chem. Technol. Biotechnol., 2001, 76, 169–178 Google Scholar

  • 161

    Akerberg C., Zacchi G., An economic evaluation of the fermentative production of lactic acid from wheat flour, Bioresour. Technol., 2000, 75, 119–126Google Scholar

  • 162

    Hábová V., Melzoch K., Rychtera M., Sekavová B., Electrodialysis as a useful technique for lactic acid separation from a model solution and a fermentation broth, Desalination, 2004, 163, 361–372Google Scholar

  • 163

    Madzingaidzo L., Danner H., Braun R., Process development and optimization of lactic acid purification using electrodialysis, J. Biotechnol., 2002, 96, 223–239Google Scholar

  • 164

    Li H., Mustacchi R., Knowles C.J., Skibar W., Sunderland G., Dalrymple I., Jackman S.A., An electrokinetic bioreactor: using direct electric current for enhanced lactic acid fermentation and product recovery, Tetrahedron, 2004, 60, 655–661Google Scholar

  • 165

    Wang X., Wang Y., Zhang X., Feng H., Xu T., In-situ combination of fermentation and electrodialysis with bipolar membranes for the production of lactic acid: Continuous operation, Bioresour. Technol., 2013, 147, 442–448Google Scholar

  • 166

    Lee E.G., Moon S.H., Chang Y.K., Yoo I.K., Chang H.N., Lactic acid recovery using two-stage electrodialysis and its modeling, J. Membr. Sci., 1998, 145, 53–66 Google Scholar

  • 167

    Xu T., Yang W., Citric acid production by electrodialysis with bipolar membranes, Chem. Eng. Process., 2002, 41, 519– Google Scholar

  • 168

    Xu T., Yang W., Effect of cell configurations on the performance of critic acid production by a bipolar membrane electrodialysis, J. Membr. Sci., 2002, 203, 145–153Google Scholar

  • 169

    Novalic S., Kulbe K.D., Separation and concentration of citric acid by means of electrodialytic bipolar membrane technology, Food Technol. Biotechnol., 1998, 36, 193–195Google Scholar

  • 170

    Pinacci P., Radaelli M., Recovery of citric acid from fermentation broths by electrodialysis with bipolar membranes, Desalination, 2002, 148, 177–179 Google Scholar

  • 171

    Novalic S., Okwor J., Kulbe K.D., The characteristics of critic acid separation using electrodialysis with bipolar membranes, Desalination, 1996, 105, 277–282Google Scholar

  • 172

    Novalic S., Kongbangkerd T., Kulbe K.D., Recovery of organic acids with high molecular weight using a combined electrodialytic process, J. Membr. Sci., 2000, 166, 99–104 Google Scholar

  • 173

    Prochaska K., Woźniak-Budych M.J., Recovery of fumaric acid from fermentation broth using bipolar electrodialysis, J. Membr. Sci., 2014, 469, 428–435 Google Scholar

  • 174

    Ferrer J.S.J., Laborie S., Durand G., Rakib M., Formic acid regeneration by electromembrane process, J. Membr. Sci., 2006, 280, 509–516 Google Scholar

  • 175

    Jaime-Ferrer J.S., Couallier E., Viers P., Durand G., Rakib M., Three-compartment bipolar membrane electrodialysis for splitting of sodium formate into formic acid and sodium hydroxide: role of diffusion of molecular acid, J. Membr. Sci., 2008, 325, 528–536 Google Scholar

  • 176

    Trivedi G.S., Shah B.G., Adhikary S.K., Indusekhar V.K., Rangarajan R., Studies on bipolar membranes. Part II. Conversion of sodium acetate to acetic acid and sodium hydroxide, React. Funct. Polym., 1997, 32, 209–215 Google Scholar

  • 177

    Zhang X., Li C., Wang Y., Luo J., Xu T., Recovery of acetic acid from simulated acetaldehyde wastewaters: Bipolar membrane electrodialysis processes and membrane selection, J. Membr. Sci., 2011, 379, 184–190 Google Scholar

  • 178

    Yu L.X., Su J., Wang J., Bipolar membrane-based process for the recycle of p-toluenesulfonic acid in D-(-)-phydroxyphenylglycine production, Desalination, 2005, 177, 209–215 Google Scholar

  • 179

    Alvarez F., Alvarez R., Coca J., Sandeaux J., Sandeaux R., Gavach C., Salicylic acid production by electrodialysis with bipolar membranes, J. Membr. Sci., 1997, 123, 61–69 Google Scholar

  • 180

    Yu L.X., Lin A.G., Zhang L.P., Chen C.X., Jiang W.J., Application of electrodialysis to the production of Vitamin C, Chem. Eng. J., 2000, 78, 153–157 Google Scholar

  • 181

    Kumar M., Saxena A., Shahi V.K., Comparative Studies on Electro-Membrane Processes for Recovery of Ascorbic Acid from its Sodium Salt, Sep. Sci. Technol., 2011, 46, 774–785Google Scholar

  • 182

    Gutiérrez L.F., Bazinet L., Hamoudi S., Belkacemi K., Production of lactobionic acid by means of a process comprising the catalytic oxidation of lactose and bipolar membrane electrodialysis, Sep. Purif. Technol., 2013, 109, 23–32 Google Scholar

  • 183

    Cauwenberg V., Peels J., Resbeut S., Pourcelly G., Application of electrodialysis within fine chemistry, Sep. Purif. Technol., 2001, 22/23, 115–121 Google Scholar

  • 184

    Jiang C., Wang Y., Xu T., An excellent method to produce morpholine by bipolar membrane electrodialysis, Sep. Purif. Technol., 2013, 115, 100–106 Google Scholar

  • 185

    Zhang K., Wang M., Wang D., Gao C., The energy-saving production of tartaric acid using ion exchange resin-filling bipolar membrane electrodialysis, J. Membr. Sci., 2009, 341, 246–251 Google Scholar

  • 186

    Liu X., Li Q., Jiang C., Lin X., Xu T., Bipolar membrane electrodialysis in aqua–ethanol medium: Production of salicylic acid, J. Membr. Sci., 2015, 482, 76–82 Google Scholar

  • 187

    Zhang F., Huang C.H., Xu T., Production of sebacic acid using two-phase bipolar membrane electrodialysis, Ind. Eng. Chem. Res., 2009, 48, 7482–7488 Google Scholar

  • 188

    Kameche M., Xu F., Innocent C., Pourcelly G., Electrodialysis in water–ethanol solutions: application to the acidification of organic salts, Desalination, 2003, 154, 9–15 Google Scholar

  • 189

    Xu F., Innocent C., Pourcelly G., Electrodialysis with ion exchange membranes in organic media, Sep. Purif. Technol., 2005, 43, 17–24 Google Scholar

  • 190

    Fu L., Gao X., Yang Y., Aiyong F., Hao H., Gao C., Preparation of succinic acid using bipolar membrane electrodialysis, Sep. Purif. Technol., 2014, 127, 212–218 Google Scholar

  • 191

    Xu T., Weihua Y., Effect of cell configurations on the performance of citric acid production by a bipolar membrane electrodialysis, J. Membr. Sci., 2002, 203, 145–153 Google Scholar

  • 192

    Novalic S., Kongbangkerd T., Kulbe K.D., Separation of gluconate with conventional and bipolar electrodialysis, Desalination., 1997, 114, 45–50 Google Scholar

  • 193

    Wang Y., Zhang N., Huang C., Xu T., Production of monoprotic, diprotic, and triprotic organic acids by using electrodialysis with bipolar membranes: Effect of cell configurations, J. Membr. Sci., 2011, 385-386, 226–233 Google Scholar

  • 194

    Shen J., Lin J., Yu J., Jin K., Gao C., Van der Bruggen B., Clean post-processing of 2-amino-1-propanol sulphate by bipolar membrane electrodialysis for industrial processing of 2-amino-1-propanol, Chem. Eng. Process. Process Intensif., 2013, 72, 137–143 Google Scholar

  • 195

    de Groot M.T., de Rooij R.M., Bos A.A.C.M., Bargeman G., Bipolar membrane electrodialysis for the alkalinization of ethanolamine salts, J. Membr. Sci., 2011, 378, 415–424 Google Scholar

  • 196

    Shen J., Huang J., Liu L., Ye W., Lin J., Van der Bruggen B., The use of BMED for glyphosate recovery from glyphosate neutralization liquor in view of zero discharge, J. Hazard. Mater., 2013, 260, 660–667 Google Scholar

  • 197

    Liu K.J., Chlanda F.P., Nagasubramanian K., Application of bipolar membrane technology: A novel process for control of sulfur dioxide from flue gases, J. Membr. Sci., 1978, 3, 57–70 Google Scholar

  • 198

    Huang C., Xu T., Jacobs M.L., Regenerating flue-gas desulfurizing agents by bipolar membrane electrodialysis, AIChE Journal, 2006, 52, 393–401 Google Scholar

  • 199

    Huang C., Xu T., Yang X.F., Regenerating fuel-gas desulfurizing agents by using bipolar membrane electrodialysis (BMED): effect of molecular structure of alkanolamines on the regeneration performance, Environ. Sci. Technol., 2007, 41, 984–989Google Scholar

  • 200

    Huang C., Xu T., Comparative study on the regeneration of flue-gas desulfurizing agents by using conventional electrodialysis (ED) and bipolar membrane electrodialysis (BMED), Environ Sci Technol., 2007, 40, 5527–5531 Google Scholar

  • 201

    Hu Y., Yang C., Cao L., Yang J., An electrochemical membrane reactor for a recycled FGD process, Chem. Eng. J., 2013, 223, 563–571 Google Scholar

  • 202

    Yang C., Hu Y., Cao L., Yang J., Performance Optimization of an Electromembrane Reactor for Recycling and Resource Recovery of Desulfurization Residuals, AIChE, 2014, 60, 2613–2624 Google Scholar

  • 203

    Eisaman M. D., Alvarado L., Larner D., Wang P., Garg B., Littau K. A., CO2 separation using bipolar membrane electrodialysis, Energy Environ. Sci., 2011, 4, 1319–1328 Google Scholar

  • 204

    Nagasawa H., Yamasaki A., Iizuka A., Kumagai K., Yanagisawa Y., A New Recovery Process of Carbon Dioxide from Alkaline Carbonate Solution via Electrodialysis, AIChE, 2009, 55, 3286–3293Google Scholar

  • 205

    Iizuka A., Hashimoto K., Nagasawa H., Kumagai K., Yanagisawa Y., Yamasaki A., Carbon dioxide recovery from carbonate solutions using bipolar membrane electrodialysis, Sep. Purif. Technol., 2012, 101, 49–59 Google Scholar

  • 206

    Shuangchen M., Tingting H., Lan M., Jingxiang M., Gongda C., Jing Y., Experimental study on desorption of simulated solution after ammonia carbon capture using bipolar membrane electrodialysis, Int. J. Greenh. Gas Control, 2015, 42, 690–698 Google Scholar

  • 207

    Eisaman M. D., Alvarado L., Larner D., Wang P., Littau K. A., CO2 desorption using high-pressure bipolar membrane electrodialysis, Energy Environ. Sci., 2011, 4, 4031–4037 Google Scholar

  • 208

    Shuto D., Nagasawa H., Iizuka A., Yamasaki A., A CO2 fixation process with waste cement powder via regeneration of alkali and acid by electrodialysis, RSC Adv., 2014, 4, 19778–19788 Google Scholar

  • 209

    Shuto D., Igarashi K., Nagasawa H., Iizuka A., Inoue M., Noguchi M., Yamasaki A., CO2 Fixation Process with Waste Cement Powder via Regeneration of Alkali and Acid by Electrodialysis: Effect of Operation Conditions, Ind. Eng. Chem. Res., 2015, 54, 6569–6577 Google Scholar

  • 210

    Ye W., Huang J., Lin J., Zhang X., Shen J., Luis P., Van der Bruggen B., Environmental evaluation of bipolar membrane electrodialysis for NaOH production from wastewater: Conditioning NaOH as a CO2 absorbent, Sep. Purif. Technol., 2015, 144, 206–214 Google Scholar

  • 211

    Koter S., Ion-Exchange Membranes for Electrodialysis – A Patents Review, Recent Patents on Chemical Engineering, 2011, 4, 14Google Scholar

About the article

Received: 2015-08-31

Accepted: 2015-12-16

Published Online: 2016-02-11

Published in Print: 2016-01-01


Citation Information: Open Chemistry, Volume 14, Issue 1, Pages 1–19, ISSN (Online) 2391-5420, DOI: https://doi.org/10.1515/chem-2016-0002.

Export Citation

© 2016 Hanna Jaroszek, Piotr Dydo, published by De Gruyter Open. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License. BY-NC-ND 3.0

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[2]
Lea Chua Tan, Edna Mejia Calix, Eldon R. Rene, Yarlagadda V. Nancharaiah, Eric D. van Hullebusch, and Piet N. L. Lens
Journal of Environmental Engineering, 2018, Volume 144, Number 11, Page 04018110
[3]
Mariagiorgia La Cerva, Luigi Gurreri, Michele Tedesco, Andrea Cipollina, Michele Ciofalo, Alessandro Tamburini, and Giorgio Micale
Desalination, 2018, Volume 445, Page 138
[5]
Hyukjin J. Kwon, Bumjoo Kim, Geunbae Lim, and Jongyoon Han
Journal of Materials Chemistry A, 2018
[6]
Stanislav Melnikov, Nicolay Sheldeshov, Victor Zabolotsky, Sergey Loza, and Aslan Achoh
Separation and Purification Technology, 2017, Volume 189, Page 74
[7]
Anjan Banerjee, Yuliya Shilina, Baruch Ziv, Joseph M. Ziegelbauer, Shalom Luski, Doron Aurbach, and Ion C. Halalay
Journal of The Electrochemical Society, 2017, Volume 164, Number 1, Page A6315

Comments (0)

Please log in or register to comment.
Log in