Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter June 1, 2007

Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

  • İ. Kaya EMAIL logo , S. Çulhaoğlu and D. Şenol
From the journal Chemical Papers

Abstract

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O2, H2O2, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by 1H-NMR, 13C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H2O2, O2, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N2 atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.

[1] Saegusa, Y., Sekiba, K., and Nakamura, S., J. Polym. Sci., Part A: Polym. Chem. 28, 3647 (1990). http://dx.doi.org/10.1002/pola.1990.08028131110.1002/pola.1990.080281311Search in Google Scholar

[2] Cerrada, P., Oriol, L., Pinol, M., and Serrano, J. L., J. Am. Chem. Soc. 119, 7581 (1997). http://dx.doi.org/10.1021/ja970558f10.1021/ja970558fSearch in Google Scholar

[3] Fujiwara, M., Mori, W., and Yamaguti, K., Mol. Cryst. Liq. Cryst. Sci. Technol., Sect. A 273, 175 (1995). Search in Google Scholar

[4] Cerrada, P., Oriol, L., Pinol, M., and Serrano, J. L., J. Polym. Sci., Part A: Polym. Chem. 34, 2603 (1996). http://dx.doi.org/10.1002/(SICI)1099-0518(19960930)34:13<2603::AID-POLA6>3.0.CO;2-S10.1002/(SICI)1099-0518(19960930)34:13<2603::AID-POLA6>3.0.CO;2-SSearch in Google Scholar

[5] Jenekhe, S. A., Yang, C. J., Vanherzeele, H., and Meth, J. S., Chem. Mater. 3, 985 (1991). http://dx.doi.org/10.1021/cm00018a00110.1021/cm00018a001Search in Google Scholar

[6] Suh, S. C. and Shim, S. C., Synth. Met. 114, 91 (2000). http://dx.doi.org/10.1016/S0379-6779(00)00234-410.1016/S0379-6779(00)00234-4Search in Google Scholar

[7] Mamedov, B. A., Vidadi, Y. A., Alieva, D. N., and Ragimov, A. V., Polym. Int. 43, 126 (1997). http://dx.doi.org/10.1002/(SICI)1097-0126(199706)43:2<126::AID-PI723>3.0.CO;2-#Search in Google Scholar

[8] Ragimov, A. V., Mamedov, B. A., and Gasanova, S. G., Polym. Int. 43, 343 (1997). http://dx.doi.org/10.1002/(SICI)1097-0126(199708)43:4<343::AID-PI749>3.0.CO;2-310.1002/(SICI)1097-0126(199708)43:4<343::AID-PI749>3.0.CO;2-3Search in Google Scholar

[9] Baughman, R. H., Bredas, J. L., Chance, R. R., Elsenbaumer, R. L., and Shacklette, L. W., Chem. Rev. 82, 209 (1982). http://dx.doi.org/10.1021/cr00048a00310.1021/cr00048a003Search in Google Scholar

[10] Kaya, İ. and Şenol, D., J. Appl. Polym. Sci. 90, 442 (2003). http://dx.doi.org/10.1002/app.1267410.1002/app.12674Search in Google Scholar

[11] Diaz, F. R., Moreno, J., Tangle, L. H., East, G. A., and Radic, D., Synth. Met. 100, 187 (1999). http://dx.doi.org/10.1016/S0379-6779(98)01484-210.1016/S0379-6779(98)01484-2Search in Google Scholar

[12] Aly, K. I. and Khalaf, A. A., J. Appl. Polym. Sci. 77, 1218 (2000). http://dx.doi.org/10.1002/1097-4628(20000808)77:6<1218::AID-APP6>3.0.CO;2-G10.1002/1097-4628(20000808)77:6<1218::AID-APP6>3.0.CO;2-GSearch in Google Scholar

[13] Kaya, İ. and Koça, S., Polymer 45, 1743 (2004). http://dx.doi.org/10.1016/j.polymer.2004.01.03510.1016/j.polymer.2004.01.035Search in Google Scholar

[14] Kaya, İ., Demir, H. Ö., and Vilayetoğlu, A. R., Synth. Met. 126, 183 (2002). http://dx.doi.org/10.1016/S0379-6779(01)00501-X10.1016/S0379-6779(01)00501-XSearch in Google Scholar

[15] Kaya, İ., Vilayetoğlu, A. R., and Mart, H., Polymer 42, 4859 (2001). http://dx.doi.org/10.1016/S0032-3861(00)00883-110.1016/S0032-3861(00)00883-1Search in Google Scholar

[16] Li, Y. F., Cao, Y., Gao, J., Wang, D. L., Yu, G., and Heeger, A. J., Synth. Met., 99, 243 (1999). http://dx.doi.org/10.1016/S0379-6779(99)00007-710.1016/S0379-6779(99)00007-7Search in Google Scholar

[17] Ayyagari, M. S., Marx, K. A., Tripathy, S. K., Akkara, J. A., and Kaplan, D. L., Macromolecules 28, 5192 (1995). http://dx.doi.org/10.1021/ma00119a00510.1021/ma00119a005Search in Google Scholar

[18] Kaya, İ. and Bilici, A., Synth. Met. 156, 736 (2006). http://dx.doi.org/10.1016/j.synthmet.2006.04.00810.1016/j.synthmet.2006.04.008Search in Google Scholar

[19] Kaya, İ. and Bilici, A., J. Appl. Polym. Sci. 102, 3795 (2006). http://dx.doi.org/10.1002/app.2475610.1002/app.24756Search in Google Scholar

[20] Kaya, I. and Koyuncu, S., Mater. Lett. 60, 1922 (2006). http://dx.doi.org/10.1016/j.matlet.2005.12.05410.1016/j.matlet.2005.12.054Search in Google Scholar

[21] Sakai, H., Matsuyama, T., Maeda, Y., and Yamaoka, H., J. Chem. Phys. 75, 5155 (1981). http://dx.doi.org/10.1063/1.44186410.1063/1.441864Search in Google Scholar

[22] Tassaing, T. and Besnard, M., J. Phys. Chem. A 101, 2803 (1997). http://dx.doi.org/10.1021/jp963767f10.1021/jp963767fSearch in Google Scholar

Published Online: 2007-6-1
Published in Print: 2007-6-1

© 2007 Institute of Chemistry, Slovak Academy of Sciences

Downloaded on 29.3.2024 from https://www.degruyter.com/document/doi/10.2478/s11696-007-0020-9/html
Scroll to top button